Abstract:SnS2-based materials have attracted considerable attention in energy storage and conversion owing to their high lithium activity and theoretical capacity. However, the practical application is severely limited by the low coulombic efficiency and short cycle life due to irreversible side reactions, low conductivity, and serious pulverization in the discharge/charge process. In this study, sheet-like stacking SnS2/reduced graphene oxide (rGO) heterostructures were developed using a facile solvothermal method. It was found that the composites between SnS2 nanoplates and rGO nanosheets are closely coupled through van der Waals interactions, providing efficient electron/ion paths to ensure high electrical conductivity and sufficient buffer space to alleviate volume expansion. Therefore, the SnS2/rGO heterostructure anode can obtain a high capacity of 840 mA h g-1 after 120 cycles at a current density of 200 mA g-1 and maintain a capacity of 450 mA h g-1 after 1000 cycles at 1000 mA g-1. In situ X-ray diffraction tests showed that SnS2/rGO undergoes typical initial intercalation, conversion, and subsequent alloying reactions during the first discharge, and most of the reactions are dealloying/alloying in the subsequent cycles. The galvanostatic intermittent titration technique showed that the diffusion of lithium ions in the SnS2/rGO heterostructures is faster in the intercalation and conversion reactions than in the alloying reactions. These observations help to clarify the reaction mechanism and ion diffusion behavior in the SnS2 anode materials, thus providing valuable insights for improving the energy efficiency of lithium-ion batteries.

Advanced ZnSnS3@rGO Anode Material for Superior Sodium‐Ion and Lithium‐Ion Storage with Ultralong Cycle Life

Organometallic Precursor-Derived SnO2/Sn-Reduced Graphene Oxide Sandwiched Nanocomposite Anode with Superior Lithium Storage Capacity

Reduced Graphene Oxide/Tin-Antimony Nanocomposites as Anode Materials for Advanced Sodium-Ion Batteries.

Composites of SnSb Nanoparticles Embedded in Porous Carbon Nanofibers Wrapped with Reduced Graphene Oxide for Sodium Storage

Few‐Layered SnS2 on Few‐Layered Reduced Graphene Oxide As Na‐Ion Battery Anode with Ultralong Cycle Life and Superior Rate Capability

Ultrafine Tin Oxide on Reduced Graphene Oxide As High-Performance Anode for Sodium-Ion Batteries

Hierarchical SnS2/carbon Nanotube@reduced Graphene Oxide Composite As an Anode for Ultra-Stable Sodium-Ion Batteries

Hydrothermal Synthesis of SnO2/MoO3-x/rGO Ternary Nanocomposites As a High-Performance Anode for Lithium Ion Batteries

Dual‐Carbon‐Confined SnS Nanostructure with High Capacity and Long Cycle Life for Lithium‐ion Batteries

Carbon-coated CoS@rGO Anode Material with Enhanced Cyclic Stability for Sodium Storage

Sheet-Like Stacking SnS2/rGO Heterostructures As Ultrastable Anodes for Lithium-Ion Batteries

Mesoporous ZnS-Sb/C Reduced Graphene Oxide Nanostructures as Anode Materials for Sodium-Ion Batteries

Sheet-Like Stacking SnS 2 /rGO Heterostructures as Ultrastable Anodes for Lithium-Ion Batteries

Covalent Bond Hybrid Nanostructure of N-doped rGO and Ultrathin SnS<sub>2</sub> with High Porosity for Lithium-Ion Batteries

Porous A-SnO2/rGO Nanocomposite via Annealing Treatment with Stable High-Capacity as Anode of Lithium-Ion Battery

Elaborate interface design of SnS2/SnO2@C/rGO nanocomposite as a high-performance anode for lithium-ion batteries

Ultrasmall TiO2-Coated Reduced Graphene Oxide Composite As a High-Rate and Long-Cycle-Life Anode Material for Sodium-Ion Batteries.

Reduced Graphene Oxide-Incorporated SnSb@CNF Composites as Anodes for High-Performance Sodium-Ion Batteries

Composite V3S4@rGO nanowires as a high-performance anode material for lithium-/sodium-ion batteries

Urchin-like alkaline nickel–cobalt carbonate derived Ni3S4/Co3S4 nanoparticles anchored on rGO for lithium/sodium-ion batteries with enhanced capacity

Structure‐Designed Preparation of Pod‐Like CuCo 2 S 4 /rGO as Advanced Anode Material Targeting Superior Sodium Storage