Abstract:In this work, the polypyrrole modified with copper phthalocyanine‑3,4′,4″,4‴‑tetrasulfonic acid tetrasodium salt (CuPcTs), named as c-PPy, was mixed with different carbon nanomaterials (single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), graphene (G), graphene oxide (GO), signal-walled carbon nanohorns (CNH)) to investigate the influence on the capacitance performance. Herein, compared with the specific capacitance of c-PPy, the c-PPy/SWCNTs exhibited the maximum specific capacitance according to cyclic voltammetry (CV) curves at the scan rate of 1 to 100mVs−1 and the maximum specific capacitance was 238Fg−1 @ 1mVs−1. The c-PPy/MWCNTs exhibited the highest specific capacitance according to galvanostatic charge/discharge (GCD) characteristics at the current density of 0.1 to 1Ag−1, while the c-PPy/SWCNTs exhibited the highest specific capacitance at the current density of 1 to 10Ag−1. The capacitance performance of c-PPy/G hybrid electrodes was larger than that of c-PPy electrode, while that of c-PPy/GO and c-PPy/CNH hybrid electrodes was smaller. And the specific capacitance of c-PPy/SWCNTs hybrid electrodes was slightly decreased at high current densities and scan rates. The capacitance retention of c-PPy/MWCNTs and c-PPy/SWCMTs hybrid electrodes was approximately 80% and 75% (after 6000cycles). It was assumed that the crosslink of CNTs was overlapped with c-PPy in c-PPy/CNTs hybrid electrodes to construct a three dimension (3D) porous conductive network to provide ion diffusion channels, electron transport pathways, high specific surface area and active sites. The cowered G played a slightly positive influence on the construction of continuous conductive c-PPy network, while the relative flat GO had a very negative impact. The particle-like CNH was not tightly adhered to the fiber-like c-PPy, which made the fluffy hybrid nanostructure. Therefore, the c-PPy/SWCNTs can be used as the active electrode of high-capacity energy storage devices.

Effectively Improving Capacitive Performance of Three-Dimensional Iron(III) Oxide Nanotube Arrays by Rationally Filling Mesopores with Polypyrrole

Inlaying ZIF-derived Co3S4 Hollow Nanocages on Intertwined Polypyrrole Tubes Conductive Networks for High-Performance Supercapacitors

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Enhanced electrochemical charge storage performance by doping of copper phthalocyanine-3,4′,4″,4‴-tetrasulfonic acid tetrasodium salt into polypyrrole/multi-walled carbon nanotubes 3D-nanostructured electrodes

Ag-Loaded Polypyrrole/Carbon Nanotube: One-Step in Situ Polymerization and Improved Capacitance

A Facile Strategy of Polypyrrole Nanospheres Grown on Ti3C2-MXene Nanosheets As Advanced Supercapacitor Electrodes

Highly Dispersed Carbon Nanotube/polypyrrole Core/shell Composites with Improved Electrochemical Capacitive Performance

Enhanced Electrochemical Performances of Organ-Like Ti3C2 MXenes/polypyrrole Composites As Supercapacitors Electrode Materials

A Nanofibrous Polypyrrole Membrane with an Ultrahigh Areal Specific Capacitance and Improved Energy and Power Densities

Synergy and Symbiosis Analysis of Capacity-Contributing Polypyrrole and Carbon-Coated Lithium Iron Phosphate Nanostructures for High-Performance Cathode Materials

Design hierarchical electrodes with highly conductive NiCo2S4 nanotube arrays grown on carbon fiber paper for high-performance pseudocapacitors.

Effect of Multi-Walled Carbon Nanotubes and Conducting Polymer on Capacitance of Mesoporous Carbon Electrode

Heterostructured polypyrrole/hybrid iron oxide composite film as highly stable anode for pseudocapacitors

Design hierarchical electrodes with highly conductive NiCo 2S4 nanotube arrays grown on carbon fiber paper for high-performance pseudocapacitors

Preparation of a Three-Dimensional Ordered Macroporous Carbon Nanotube/Polypyrrole Composite for Supercapacitors and Diffusion Modeling

A Simple Strategy for Constructing Hierarchical Composite Electrodes of PPy‐Posttreated 3D‐Printed Carbon Aerogel with Ultrahigh Areal Capacitance over 8000 mF cm–2 (Adv. Mater. Technol. 7/2022)

Facile Construction of Three-Dimensional Architectures of a Nanostructured Polypyrrole on Carbon Nanotube Fibers and Their Effect on Supercapacitor Performance

Synthesis of polypyrrole–titanium dioxide brush-like nanocomposites with enhanced supercapacitive performance

PPy film/TiO2 nanotubes composite with enhanced supercapacitive properties

Highly Stable Multi-Wall Carbon Nanotubes@poly(3,4-Ethylenedioxythiophene)/poly(styrene Sulfonate) Core–shell Composites with Three-Dimensional Porous Nano-Network for Electrochemical Capacitors

Multiwalled Carbon Nanotubes/Polypyrrole/Graphene/Nonwoven Fabric Composites Used As Electrodes of Electrochemical Capacitor