Abstract:There is an increasing concern about global climate change and the decreasing availability of fossil fuels. Research is being conducted worldwide to develop new technologies for the generation of energy from renewable resources, such as biomass and solar photons, and to increase energy efficiency and lower emissions in the conversion of fossil fuels. Catalysis will be a key discipline and play a critical role in developing these new energy technologies. This Special Issue about catalysis for new energy technologies presents the current progresses in this exciting field, based on the Symposium on New Energy Technologies as a part of the 240th National Meeting of the American Chemical Society held in Boston, USA on August 22–26, 2010. It contains invited papers from leading researchers in a wide range of important topics related to new energy that address the scientific aspects including photocatalysis, catalysis for biomass conversion, hydrogen production from both fossil fuels and biomass, and the conversion of H2 in fuel cells. Solar energy is an abundant source of renewable energy, but the low energy efficiency of harvesting solar energy and the high cost are the hurdles for effective utilization of solar energy. Fundamental studies are necessary to enable the technological breakthroughs needed. The collection of papers in this field deals with artificial photosynthesis inspired by natural photosynthesis, nanocrystalline catalysts for photocatalytic steam reforming of ethanol and glycerol, and homogeneous photocalalytic oxidation of hydrocarbons. Fan and coworkers has reviewed some successful prototypes from natural systems that can be used for the biomimetic design of artificial leaves, and the major advances in constructing artificial leaves by mimicking photosynthesis to capture solar energy. The recent progresses in catalytically production of hydrogen from water and various environmentally clean fuels from carbon dioxide by the artificial leaves are highlighted. Y. Amao has reviewed the recent progress in solar fuel production based on the artificial photosynthesis system. Although the efficiency values of artificial photosynthesis are still too low for practical application, they illustrate that solar fuel production inspired by natural photosynthesis is achievable in the laboratory. More research will be necessary to explore the potential artificial photosynthetic systems. Fornasiero and co-workers reported the active and cheap Cu/TiO2 nanocomposites for hydrogen production by means of the photocatalytic reforming of ethanol and glycerol. The highly dispersed Cu nanoparticles on TiO2 were successfully produced by the photodeposition of Cu on the surface of multiphase TiO2. Zhao and coworkers have presented ruthenium complexes as a new photocatalytic homogeneous system for the oxidation of hydrocarbons. They confirmed the light-induced formation of RuIVO species during the photocatalytic oxygenation process. More detailed mechanistic studies are expected to provide guidelines towards the design of better photocatalytic systems for the oxidation of water and organic substances. It has recently been stated that biomass is the only practical source of renewable liquid fuel. In the Energy and Climate Package and the related Renewable Energy Roadmap published on January 10, 2007, the European Commission proposed that in the European Union at least 10% of our transportation fuels should be biofuel by 2020. One work, collected in this Special Issue, reflects the progress in the application of the heterogeneous acidic catalysts for the production of biodiesel from waste oils. However, the second-generation biofuels made from plant wastes, or from crops specially grown for the purpose on land, which are not suitable for food production, offer greater promise than the first generation of biofuels being produced today. Lignocellulose (or cellulose) is the cheapest and most abundant source of biomass. The production of liquid fuels from lignocellulosic biomass involves removal of some oxygen, as CO2 or H2O, and conversion into a higher-density liquid fuel. It would also be desirable to have a biomass conversion process that is able to convert all the energy in the biomass to a transportation fuel that could easily be fit into existing infrastructure and without air pollution. However, selective activation of CC, CO, CH bonds in biomass molecules remains a great challenge. Zheng et al. reported a combined experimental and DFT investigation of the selective activation of CO bonds by using acetone and acetaldehyde as probe molecules. CO bond hydrogenation has been considered as an important initial step in catalytic conversion of cellulose biomass. Unlike their corresponding monometallic catalysts, CoPt bimetallic catalysts exhibit significantly higher CO hydrogenation activity, which was correlated to the weak binding energy of the reactants on the bimetallic surfaces predicted by DFT. Exploring the DFT investigation on the correlation between the binding energies of the carbonyl compounds and the hydrogenation activity could improve the capability of rational catalysts design for the selective hydrogenation of molecules. Chen and He also demonstrated the importance of selective activation of CC bonds of biomass derived molecules in the steam reforming and gasification for hydrogen production. A general relationship between C binding energies and hydrogen selectivities was illustrated in their review of H2 from biomass. Fischer–Tropsch (FT) synthesis represents a promising process to produce clean liquid fuels from abundant natural gas, coal, and biomass, after first being converted to synthesis gas. The Minireview by Goodman, Liu and co-workers describes the state-of-the-art surface science studies on cobalt FT catalysts on both a single crystal and supported catalysts. The surface science results suggested that FT synthesis is structure insensitive in general and that there is no intrinsic particle-size effect. Rather small Co nanoparticles (2.5 nm) are easily oxidized by water vapor, which results in poor catalytic performance. No excessive carbon build-up is detected below reaction temperature of 550 K and graphite begins to form at higher temperatures. A Minireview about FT synthesis over molecular-sieve-supported catalysts was presented by Tao et al. H2 has been proposed as a clean energy carrier in the future. Sustainable hydrogen production is a key target in the development of future alternative energy systems for providing a clean and affordable energy supply. Chen and He presented a comprehensive Review of sustainable H2 production from biomass by means of three platforms; synthesis gas from biomass gasification, sugars from hydrolysis of biomass and bio-oils from biomass pyrolysis. One-stage efficient hydrogen production with a purity larger than 99% can be realized by sorption enhanced reactions including steam reforming and gasification of biomass derived molecules. General principles of rational design of catalysts with high activity and coking resistance were discussed. A comprehensive Review of catalysis for hydrogen production from logistic fuels was given by Yerga et al. The challenges and progress in steam reforming, partial oxidation, and autothermal reforming of heavy hydrocarbons were discussed. The low durability of the catalysts, attributed to carbon and sulfur poisoning, is the hurdle for any practical application. A Minireview by Liu and his coworkers has summarized the very recent progresses in the design, synthesis, and characterization of coke resistant Ni catalysts for steam and CO2 reforming of methane. They critically reviewed the effects of identities of metals, promoters, and supports, as well as the preparation methods on carbon formation during methane steam and dry reforming. In the area of hydrogen conversion using fuel cells, an investigation is presented on the structural and compositional changes of catalysts. A trimetallic PtVFe/C catalyst was used for oxygen reduction in a fuel cell for research aimed at a better understanding of factors controlling electrocatalytic activity and stability of carbon-supported multimetallic catalysts. The Guest Editors would like to thank all the contributors to this Special Issue, the referees, the editors and the editorial staff of ChemCatChem for assistance.

Abstract:Catalysis is facilitating the development of our society due to its critical role in the fields of energy conversion, environmental remediation, human health care, and so forth. With the diminishing of the fossil fuels and the increasing carbon emission year by year, the exploration of novel catalytic systems for eco-catalysis of small molecules, such as N2, O2, H2O, CO2, and light alkanes, into value-added chemicals with high efficiency and low carbon emission is attracting more and more attention. The eco-catalysis of small molecules relies heavily on the rational design of functional catalysts and the clever choice of energy suppliers (thermal/photo/electro-based) to overcome the activation barriers of nitrogen-nitrogen, carbon-hydrogen, carbon–oxygen bonds, as well as to achieve highly efficient carbon–carbon coupling for long-chain hydrocarbons synthesis from small molecules. In the past decades, tremendous progress has been made in the field of eco-catalysis of small molecules, for example, but not limited to, the ammonia synthesis via electro-catalysis of N2, the electro/photo-driven overall water splitting for H2 or O2 evolution, and the hydrogenation of CO2 into basic chemicals (light olefins or aromatics). However, the large-scale utilization of the aforementioned eco-catalysis technologies is still hampered by the low transformation efficiency (conversion rate and target products selectivity), ambiguous reaction mechanism, the lack of appropriate engineering equipment, and so forth. Thus, to drive the eco-catalysis of small molecules going forward, this special issue highlights the recent advancements in the relevant research areas, especially the tailor-made functional catalysts that boost the highly efficient conversion of small molecules, including oxygen vacancy-rich metal oxide or metal phosphide-based catalysts for photo/electro-catalytic water splitting, highly efficient catalysts for thermo-catalytic hydrogenation and photo-catalytic conversion of CO2 respectively into aromatics or methanol, transition metal/carbon composites as electro-catalysts for oxygen electro-catalysis, advanced catalysts for light alkanes upgrading, halide perovskites for photo-synthesis, and so forth. H2 evolution from photo/electro-catalytic water splitting is a promising H2 synthesis strategy with less carbon footprint and energy consumption compared with the traditional coal-steam reforming process. Currently, different kinds of catalysts have been investigated in the photo/electro-catalytic water splitting for H2 production. Zou et al. summarized the recent development of metal phosphides as outstanding electro-catalysts to lower the overpotential of electro-catalytic water splitting and co-catalyst during the photo-catalytic water splitting process to accelerate the transfer and separation of charge carriers. Although some progress has been made, the actual rate of H2 production is still too low to meet the demand of industrial applications. The ultimate goal is to explore stable, efficient, and low-cost metal phosphide-based catalysts or co-catalysts for commercial electro/photo-catalytic H2 evolution from water splitting. Furthermore, vacancy-rich metal oxides have also been widely employed as efficient catalysts for H2 production by photoelectro-chemical water splitting. Wang et al. comprehensively summarized the influence of oxygen vacancy on the photo-electrode in two aspects that is the optoelectrical property of semiconductor and surface electro-catalysis. However, due to the complicated nature of oxygen vacancy, the knowledge about oxygen vacancy is far from sufficient to fully utilize oxygen vacancy in tailoring photo-electrodes. In-depth understanding and rational engineering of the defects, especially oxygen vacancy, in the semiconductors could lead to potential breakthroughs in this promising research field. CO2, as an important greenhouse gas, has brought great environmental issues, such as ocean acidification, climate change, and global warming. The highly efficient conversion of CO2 into value-added chemicals will shed new light on the resource utilization of CO2 and the alleviation of its environmental concerns. CO2 conversion can be realized by various strategies, including electro-chemical, photo-chemical, and thermo-chemical processes, among which thermo-chemical CO2 hydrogenation strategy has attracted tremendous attention due to its high efficiency, controllable selectivity, and tremendous potential for industrial application. Tsubaki et al. systematically investigated the advanced bifunctional or multifunctional catalyst for the direct hydrogenation of CO2 into aromatics via the methanol-mediated pathway or the modified Fischer-Tropsch synthesis process. It should be noted that the development of CO2 hydrogenation technology should not neglect several important points, such as the cost of CO2 capture and H2 supply, carbon-neutral strategy for H2 production, and the integration of the related processes. The multiple collaborations and interplay between various research endeavors are needed to speed up the progress of CO2-to-aromatics systems toward industrial applications. In addition to the thermo-catalytic CO2 hydrogenation process, the solar-driven conversion of CO2 into methanol is an effective solution to the global energy shortage and the current greenhouse gas issue. Zou et al. gave a comprehensive overview of the recent research progress in the solar-driven catalytic synthesis of methanol from CO2 and briefly outlines the relationships among the traditional photo-catalysis, photoelectron-catalysis, and photothermal-catalysis. The unique strategies for the design of catalysts are summarized and discussed. The wide and huge reservation of shale gas around the world and the successful exploitation of the burning ice have drastically altered the global energy and chemicals market. The discovery of alternative pathways for the direct conversion of light alkanes into target products with long-term stability is a key step for the utilization of shale gas and burning ice. Chen et al. summarized the important progress in the catalytic conversion of light alkanes with emphasis on the design and preparation of novel heterogeneous catalysts in the recent 10 years. Three essential issues, C─H bond activation, product over-oxidation, and coke deposition are highly relevant to the activity, selectivity, and stability of catalytic processes, respectively. The catalytic conversion of shale gas not only provides an alternative way for chemicals synthesis but also can be employed as a facile method for the fabrication of nano-carbon materials, such as graphene, carbon nanofibers, and carbon nanotubes. Zhang et al. summarized the growth mechanism, kinetics, growth factors of vertically aligned carbon nanotubes arrays by light alkanes, and the strategies for how to improve their array lengths. The photo/electro-catalysis of N2 looping hold great potential to achieve sustainable and efficient utilization of N2 because of its huge reserves on the Earth. Liang et al. provided a timely review on the recent progress, achievements, and essential challenges for the artificial nitrogen looping process. Especially, the photo/electro-catalysts involved in nitrogen looping, including nitrogen reduction reaction, nitrogen oxidation reaction, ammonia oxidation reaction, and so forth, are systematically introduced. There are still a series of key challenges remaining unsolved, such as low efficiency, high cost, poor stability, and absence of in-depth theoretical understanding. Thus, more efforts should be made on some key points in order to further promote the development of these catalysts, and finally, achieve the practical application. Transition-metal/carbon hybrid catalysts show excellent potentials in O2 electro-catalysis. Xia et al. summarized the recent achievements in transition metal/carbon hybrids for oxygen electro-catalysis. Their attention has been focused on the relationship between structure and performance with their synthesis strategies. Their application in rechargeable zinc-air batteries has been also comprehensively discussed. Halide perovskites have already received extraordinary attention from the research community due to their unique photo-physical properties, making them promising candidates for application in various fields like photovoltaic, photoelectric devices. Li et al. focused their attention on the energy-related applications of halide perovskites including light emission and artificial photosynthesis. In addition to the above-mentioned review works for the development of functional materials for small molecules conversion, two exciting research papers have also been devoted to our special issue. We expect that these works can provide some inspiration for readers as well. Mintova et al. fabricated a stable protection TiO2 layer on the surface of Al2O3 to inhibit the formation of unstable spinel phase. The introduction of TiO2 significantly improved the stability of the adsorbents during cyclic hydrothermal treatments, while the sulfur capacity slightly dropped. Huang et al. proposed a redox mediation strategy to accelerate the electron transfer processes in working Li–S batteries with sulfurized polyacrylonitrile as cathodes. The redox mediator-assisted sulfurized polyacrylonitrile cathodes exhibit higher specific capacity, improved rate performance, reduced polarization, and longer cycling lifespan with both ether-based and carbonate-based electrolytes. In summary, tremendous achievements for the rational design of functional materials for eco-catalysis have been made. Meanwhile, novel reaction pathways based on the functional materials and eco-catalysis processes have also been established for value-added chemicals synthesis. As the guest editors, we hope that this special issue can inspire the readers to explore the novel functional materials and reaction pathways for the highly efficient conversion of small molecules into value-added chemicals. Furthermore, the great contributions made by the authors, referees, and the EcoMat editorial team deserved to be greatly appreciated. The authors declare no conflict of interest. Han Hu received his PhD degree in Chemical Engineering from Dalian University of Technology in 2014. Then, he conducted postdoctoral research at Nanyang Technological University (2014–2016), Leibniz Institute for Solid State and Materials Research Dresden (2016–2017), and The University of Queensland (2017–2018) before joining China University of Petroleum (East China) in 2018. He is currently a full professor and the deputy director of State Key Lab of Heavy Oil Processing. His research interest focuses on the production and surface engineering of functional carbon materials for energy storage and conversion. Yi Du is a professor at Beihang-UOW Joint Research Centre at Beihang University and Australian Institute for Innovative Materials at the University of Wollongong, Australia. He received his PhD from The Institute for Superconducting and Electronic Materials at the University of Wollongong, Australia (2011). His research interests include surface physics, low-dimensional quantum matters, liquid metal and catalysis studied by using scanning tunneling microscopy and angle-resolved photoemission spectroscopy. Xuezhi Duan received his PhD degree in chemical engineering from East China University of Science and Technology (ECUST) in 2012. After a two-year (2013–2015) stint with Prof. De Chen as a VISTA Scholar at Norwegian University of Science and Technology, he joined the faculty of School of Chemical Engineering at ECUST. He is now a full-distinguished professor and deputy director of the State Key Laboratory of Chemical Engineering. His current research interests include kinetics-assisted catalyst design, theoretical calculations and reactor engineering.

A Current Perspective on Catalysis for New Energy Technologies

Recent Progress on Bimetallic Catalysts for the Production of Fuels and Chemicals from Biomass and Plastics by Hydrodeoxygenation

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

A review of thermal catalytic and electrochemical hydrogenation approaches for converting biomass-derived compounds to high-value chemicals and fuels

Hydrogen production from the thermochemical conversion of biomass: issues and challenges

A review on advanced catalytic co-pyrolysis of biomass and hydrogen-rich feedstock: Insights into synergistic effect, catalyst development and reaction mechanism

A review on potential applications of Fe/Ni/Ca in biomass catalytic reforming to produce hydrogen

Photocatalytic nanomaterials and their implications towards biomass conversion for renewable chemical and fuel production

Hydrogen generation from biomass materials: challenges and opportunities

A Review of Recent Research on Catalytic Biomass Pyrolysis and Low-Pressure Hydropyrolysis

Functional Materials for Eco‐catalysis of Small Molecules

Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels

Heterogeneous Catalytic Transfer Hydrogenation As an Effective Pathway in Biomass Upgrading

Catalytic Production of Renewable Hydrogen for Use in Fuel Cells: A Review Study

From Waste to Clean Energy: An Integrated Pyrolysis and Catalytic Steam Reforming Process for Green Hydrogen Production from Agricultural Crop Residues

Photocatalytic biomass conversion for hydrogen and renewable carbon-based chemicals

Preparation of Hydrogen via Catalytic Gasification of Residues from Biomass Hydrolysis with a Novel High Strength Catalyst

Heterogeneous photocatalytic conversion of biomass to biofuels: A review

Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Recent advances in catalytic CO2 hydrogenation to alcohols and hydrocarbons

Progress and Perspectives in Photo‐ and Electrochemical‐Oxidation of Biomass for Sustainable Chemicals and Hydrogen Production