Abstract:NH 3 synthesis via the electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions has been regarded as a sustainable strategy for fertilizer production, hydrogen fuel storage, and mitigating greenhouse gas emissions. Electrochemical reduction reaction of nitrogen to ammonia has been widely investigated as a potential technology to overcome thermodynamic barrier of high-temperature and high-pressure needed for industrial Haber-Bosch process. The design of construction of heteroatoms (e.g., B, N, P, S) doped carbon materials have become a research focus as metal-free electrocatalysts owing to their good electrochemical stability and high electronic conductivity. N-doping carbon materials could induce the protonated pyridinic N and adjacent atomic vacancy site, which are favor of N 2 adsorption. Besides, on account of charge density difference, B-doping carbon materials could induce inhomogeneity for carbon to adsorb N 2 molecules. Compared with single heteroatom dopant, heteroatom co-doping could bring in charge redistribution of carbon, which can facilitate the chemisorption of N 2 molecules and following electron transfer. Herein, we present a metal-free B and N co-doped porous carbon nanofibers (B/N-CNF) fabricated by an electrospinning and calcination strategy. The FESEM image of B/N-CNF showed the typical morphology of the cross-linked carbon networks composed of nanofibers with a diameter of ~100 nm. The contents of B and N dopant for B/N-CNF were 29.9% and 27.6%, respectively. The N 2 adsorption-desorption isotherms curve of B/N-CNF exhibited a high BET specific surface area of 748 m 2 g -1 and a mesopores structure with pore diameter of around 4 nm and volume of ~0.39 cm 3 g -1 . Benefitting from a high surface area and synergistic effect between B and N dopants, the B/N-CNF exhibited a high electrocatalytic activity for NRR in a basic electrolyte, achieving the highest FE of 13.2% at -0.5 V and the NH 3 yield rate of 32.5 μg h -1 mg -1 cat. at -0.7 V. Such a high NRR activity was superior to most of the previously reported B- or N- doped carbon materials. It was found that B atoms facilitated the cleavage of N≡N bonds, and the N atoms enhanced the electronic conductivity of CNF nanofibers. The B/N-CNF delivered superior catalytic activity for electrochemical NRR, featured by the highest FE of 13.2% at -0.5 V and NH 3 yield of 32.5 μg h -1 mg -1 cat. at -0.7 V in basic electrolytes. The high NRR performance could be attributed to the synergistic effect between B and N co-dopants. The FE value of B/N-CNF was almost the highest among all previously reported carbon-based materials with single N- or B-doping. Moreover, an electrolyzer with B/N-CNF as the cathode and commercial Ir/C as the anode was successfully fabricated to confirm the NRR activity of B/N-CNF driven by alkaline batteries and solar panels. The developed B/N-CNF presented in this work paves a promising pathway for rational design of highly efficient dual heteroatoms doped carbon materials for not only NRR, but other electrochemical energy conversion reactions.

Silica-Assisted Fabrication of N-doped Porous Carbon for Efficient Electrocatalytic Nitrogen Fixation

In Situ Growth of Nitrogen-Doped Carbon-Coated γ-Fe<sub>2</sub>O<sub>3</sub> Nanoparticles on Carbon Fabric for Electrochemical N<sub>2</sub> Fixation

Nano-CaCO3 Templated Porous Carbons Anchored with Fe Single Atoms Enable High-Efficiency N2 Electroreduction to NH3

N-Doped Porous Carbon Self-Generated on Nickel Oxide Nanosheets for Electrocatalytic N-2 Fixation with a Faradaic Efficiency Beyond 30%

One-step synthesis of N, P co-doped porous carbon electrocatalyst for highly efficient nitrogen fixation

In Situ Growth Of Nitrogen-Doped Carbon-Coated Gamma-Fe2o3 Nanoparticles On Carbon Fabric For Electrochemical N-2 Fixation

Boosting Electrocatalytic Nitrogen Fixation with Co–N 3 Site-Decorated Porous Carbon

A hybrid catalyst for efficient electrochemical N2 fixation formed by decorating amorphous MoS3 nanosheets with MIL-101(Fe) nanodots

Nitrogen-Doped Porous Carbon Nanosheets Templated from g-C3 N4 as Metal-Free Electrocatalysts for Efficient Oxygen Reduction Reaction.

Directly Anchoring Fe3C Nanoclusters and FeNx Sites in Ordered Mesoporous Nitrogen-Doped Graphitic Carbons to Boost Electrocatalytic Oxygen Reduction

Molybdenum Carbide Nanodots Enable Efficient Electrocatalytic Nitrogen Fixation under Ambient Conditions

Fabricating hierarchically porous and Fe3C-embeded nitrogen-rich carbon nanofibers as exceptional electocatalysts for oxygen reduction

N2 Electroreduction: A Highly Efficient Metal‐Free Electrocatalyst of F‐Doped Porous Carbon Toward N2 Electroreduction (adv. Mater. 24/2020)

Carbon Nanosheets: Nitrogen‐Doped Porous Carbon Nanosheets Templated from G‐c3n4 As Metal‐Free Electrocatalysts for Efficient Oxygen Reduction Reaction (adv. Mater. 25/2016)

In Situ Anchoring of Zeolite Imidazole Framework-Derived Co, N-Doped Porous Carbon on Multiwalled Carbon Nanotubes Toward Efficient Electrocatalytic Oxygen Reduction

(Invited) Boron and Nitrogen Co-Doped Porous Carbon Nanofibers As Metal-Free Electrocatalysts for Highly Efficient Ammonia Electrosynthesis

Molten-salt/oxalate mediating Fe and N-doped mesoporous carbon sheet nanostructures towards highly efficient and durable oxygen reduction electrocatalysis

S-Doped Carbon Nanospheres: An Efficient Electrocatalyst toward Artificial N-2 Fixation to NH3

A Simple Synthesis Of Co3o4@Cnt To Boost Electrochemical Nitrogen Fixation

A Highly Efficient Metal-Free Electrocatalyst of F-Doped Porous Carbon Toward N2 Electroreduction.

Carbon Fiber Supported Binary Metal Sulfide Catalysts with Multi-Dimensional Structures for Electrocatalytic Nitrogen Reduction Reactions Over a Wide pH Range