Abstract:The main motivation of the present work was to fabricate novel multifunctional polymer‐based nanocomposites. The nanocomposites embedded with multi‐walled carbon nanotube‐boehmite (MWCNT‐boehmite) were prepared via hot pressure casting technique. The MWCNT coated with boehmite were synthesized by hydrothermal synthesis. Subsequently, as‐prepared MWCNT‐boehmite was added into the phthalonitrile‐terminated polyarylene ether nitriles (PEN‐t‐CN) matrix in order to benefit from the synergetic effect of MWCNT and boehmite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) X‐ray diffraction (XRD), and Fourier transform infrared (FTIR) were employed to confirm the existence of MWCNT‐boehmite in our article. Furthermore, the structures, fracture morphologies, thermal, mechanical and dielectric properties of the nanocomposites were investigated, respectively. SEM images indicated that the MWCNT‐boehmite was homogeneously dispersed in the polymer, which acted as an essential factor to ensure good physical properties. The TGA analysis showed that the incorporation of MWCNT‐boehmite enhanced the thermal stability of the nanocomposites with initial degradation temperature (Tid) increasing from 458 to 492°C, while that of the pure PEN‐t‐CN was 439°C. The mechanical testing proved that significant enhancement of mechanical properties has been achieved. The tensile strength of PEN‐t‐CN/MWCNT‐boehmite composites with 3 wt% MWCNT‐boehmite reached the maximum (78.33 MPa), with a 41.7 % increase compared to the pure polymer. More importantly, the unique dielectric properties were systematically discussed and the results demonstrated that dielectric properties exhibited little dependency on frequency. For the incorporation of hybrid filler, the positive impact of MWCNT‐boehmite hybrid material resulted in polymer‐based nanocomposites with enhanced physical properties. POLYM. COMPOS., 36:2193–2202, 2015. © 2014 Society of Plastics Engineers

Novel In-Situ Nanocomposites of Phthalonitrile End-Capped Polyarylene Ether Nitrile/Copper Phthalocyanine

Photoelectric Properties of Poly(arylene Ether Nitriles)–copper Phthalocyanine Conjugates Complex Via in Situ Polymerization

A novel single-component composite based on phthalonitrile end-capped polyarylene ether nitrile: crystallization and crosslinking

Phthalonitrile End-Capped Polyarylene Ether Nitrile Nanocomposites with Cu2+ Bridged Carbon Nanotube and Graphene Oxide Network

Covalent grafting of a-CNTs on copper phthalocyanine for the preparation of PEN nanocomposites with high dielectric constant and high thermal stability

Phthalonitrile end‐capped polyarylene ether nitrile: crystals embedded in matrix through crosslinking reaction

Facile Synthesis of Copper Phthalocyanine Supported on MWCNTs to Improve Their Dispersibility and Compatibility in PEN Matrix

In Situ Preparation and Determination of Electrochemical and Electrochromic Properties of Copper Phthalocyanine-Polyaniline Nanocomposite Films

Preparation and Characterization of Poly (arylene Ether Nitrile)/copper Phthalocyanine Composites Via Sintering Treatment

Preparation of hybrid colloidal graphite-copper phthalocyanine and their utilization in polymer composites with enhanced thermal conductivity and mechanical properties

Effect of CuPc@MWCNTs on rheological, thermal, mechanical and dielectric properties of polyarylene ether nitriles (PEN) terminated with phthalonitriles

Crosslinking behavior of polyarylene ether nitrile terminated with phthalonitrile (PEN-t-Ph)/1,3,5-Tri-(3,4-dicyanophenoxy) benzene (TPh) system and its enhanced thermal stability

Advanced Composites Based on End-Capped Polyarylene Ether Nitrile/bisphthalonitrile with Controllable Thermal Curing Reaction

The Relationship Between Processing and Performances of Polyarylene Ether Nitriles Terminated with Phthalonitrile/trifunctional Phthalonitrile Composites

Synthesis and Properties of Crosslinked Poly(arylene Ether Nitriles) Containing Pendant Phthalonitrile

Composites of Core/Shell-Structured Copper-Phthalocyanine-Decorated TiO 2 Particles Embedded in Poly(Arylene Ether Nitrile) Matrix with Enhanced Dielectric Properties

Fabrication of Crosslinked Single-Component Polyarylene Ether Nitrile Composite with Enhanced Dielectric Properties

Controllable High Dielectric Permittivity of Poly(arylene Ether Nitriles)/copper Phthalocyanine Functional Nanohybrid Films Via Chemical Interaction

Effect of Nitrile-Functionalization and Thermal Cross-Linking on the Dielectric and Mechanical Properties of PEN/CNTs–CN Composites

Micro/Mesoporous Fe3O4/Fe-Phthalocyanine Microspheres and Effects of Their Surface Morphology on the Crystallization and Properties of Poly(Arylene Ether Nitrile) Composites

Enhanced Properties of Phthalonitrile‐terminated Polyarylene Ether Nitriles Embedded with Hybrid MWCNT–boehmite Nanocomposites