Abstract:We are developing transparent multi- electrochemical electrode arrays on microchips in order to automate measurement of quantal exocytosis. Design goals are that one and only one cell be positioned directly over each electrode and working electrodes have μm-scale dimensions in order to resolve pA-level currents. Patterning of cell-adhesion molecules in register with electrodes using conventional photolithographic approaches is problematic because organic solvents can disable sensitive biomolecule films. We report the parylene “dry liftoff” approach pioneered by Ilic and Craighead (Biomed Microdev 2: 317, 2000) can be used to pattern single cell-electrode pairs on the chip. A 1 μm-thick parylene C film is deposited on the multi-electrode array and S1813 photoresist is spin coated onto the device and patterned. The unprotected parylene over the electrodes is then removed using Reactive Ion Etch. Poly-l-lysine (PLL) is then added to promote cell attachment. Chromaffin cells are loaded on the chip in standard culture media and left in an incubator overnight. Finally, the parylene film is peeled off to remove excess cells and PLL, leaving tightly adhered chromaffin cells at the desired locations. Importantly, we find that promoting cell attachment with PLL films does not passivate the electrochemical electrodes. Experiments are in process to explore an alternative approach whereby PLL is patterned using the dry liftoff approach but cells are added after peel off of the parylene. With this approach, cell attachment to inactive areas of the chip is blocked by using “cytophobic” materials such as Teflon AF. This alternative approach may allow efficient targeting of cells at lower cell densities as cells migrate from cytophobic areas to the electrode binding sites (Supported by NIH BRP grant RO1 NS048826).

DESIGN AND PREPARATION OF EIGHT Cr-Au ELECTRODES FOR THE MICROFLUIDIC DETECTION OF APOPTOTIC CELLS

Research of Integrated Cellular Chip Based on Microfabrication

Microfluidic Chip System Integrated with Light Addressable Potentiometric Sensor (LAPS) for Real-Time Extracellular Acidification Detection

Electronic detection of apoptotic cells on a microchip

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

A Microfluidic Chip with Integrated Microelectrodes for Real-time Dopamine Detection

Toward the early evaluation of therapeutic effects: an electrochemical platform for ultrasensitive detection of apoptotic cells.

Detection of the Apoptosis of Jurkat Cell Using an Electrorotation Chip

An Electrically Heated Au Electrode for Electrochemical Detection in Microchip System

Ultrasensitive Amperometric Cytosensor for Drug Evaluation with Monitoring Early Cell Apoptosis Based on Cu2O@PtPd Nanocomposite As Signal Amplified Label

Ultrasonic-Aided Fabrication of Nanostructured Au-Ring Microelectrodes for Monitoring Transmitters Released from Single Cells

Microfluidic chip integrated with flexible PDMS-based electrochemical cytosensor for dynamic analysis of drug-induced apoptosis on HeLa cells.

Label-free electrical discrimination of cells at normal, apoptotic and necrotic status with a microfluidic device.

A dual-functional microfluidic chip for on-line detection of interleukin-8 based on rolling circle amplification

Preparation method and application of electrochemical micro-fluidic sensing chip

Integrated Multifunctional Electrochemistry Microchip for Highly Efficient Capture, Release, Lysis, and Analysis of Circulating Tumor Cells.

An electrochemical-TUNEL method for sensitive detection of apoptotic cells.

Enhanced on-Chip modification and intracellular hydrogen peroxide detection via gigahertz acoustic streaming microfluidic platform

Patterning Single Cell-Electrode Pairs for Electrochemical Measurement of Quantal Exocytosis on Microchips

Microfluidic Cell Chip Analytical System with Led Induced Fluorescence Detector

Integration of electrodes in a suction cup-driven microchip for alternating current-accelerated proteolysis.