Abstract:In robotic arm-based noncooperative spacecraft-capture missions, the gripper of the robotic arm collides with the target's surface and graspable structure. The former can cause the graspable structure to collide with the gripper multiple times or escape from the gripper. The adverse of the latter is that the momentum transfer can result in a sudden change in motion of the service spacecraft. If the service spacecraft is required to be in the desired configuration, the control system needs to generate a considerable control output. This paper designs a new capturing strategy to avoid these adverse phenomena, which divides the capture process into two phases: colliding and locking. In the colliding phase, the gripper will actively contact the target's surface and should maintain the contact, i.e., form a stable contact. This study proposes an improved damping-control scheme for forming a stable contact to realize this objective. Unlike the existing control scheme, this one allows the base of the service spacecraft to move, which helps to reduce the control force acting on the base, saving fuel. After establishing the stable contact, the gripper begins to close. The locking phase starts after forming a force-closure grasp. In this phase, the gripper will continue to close in a controlled manner. However, the states of the service spacecraft's base and robotic arm should transform from the controlled state to the uncontrolled state. A significant benefit is that the control system does not need to produce large control outputs to resist the colliding impact. Meanwhile, since the service spacecraft has a large inertia, the momentum transfer caused by the collision does not cause significant changes in its configuration. Numerical simulations are performed to evaluate the validity of the proposed control scheme and capturing strategy at the end of this paper. The results indicate that the proposals allow the space robot to grasp the target spacecraft with less control cost.

Generate Optimal Grasping Trajectories to the End-Effector Using an Improved Genetic Algorithm

Trajectory Optimization for Manipulation Considering Grasp Selection and Adjustment

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

Visualized Trajectory Planning of Flexible Redundant Robotic Arm Using A Novel Hybrid Algorithm

Towards Safe and Aggressive Motion Generation for Dynamic Targets Pick-and-Place

Collision-Free Optimal Trajectory for a Controlled Floating Space Robot

Manipulation Trajectory Optimization with Online Grasp Synthesis and Selection

Optimal configuration for dual-arm space robot grasping a tumbling target based on task compatibility

INSGA-II based multi-objective trajectory planning for manipulators

Modeling and Planning of a Space Robot for Capturing Tumbling Target by Approaching the Dynamic Closest Point

Trajectory Planning of Space Robot System for Target Berthing and Reorientation after Capturing

A Trajectory Planning Method For Rapid Capturing An Unknown Space Tumbling Target

Hybrid Control Scheme for Grasping a Non-Cooperative Tumbling Satellite

A new strategy for capturing a noncooperative spacecraft by a robotic arm

Dynamic grasp and trajectory planning for moving objects

Global Minimum-Jerk Trajectory Planning of Space Manipulator

Autonomous Capturing of Moving Target with Optimal Rendezvous Attitude and Manipulator Configuration.

Exploiting Kinematic Redundancy for Robotic Grasping of Multiple Objects

Multi-objective Trajectory Planning Method based on the Improved Elitist Non-dominated Sorting Genetic Algorithm

Trajectory Optimization and Tracking Control of Free-flying Space Robots for Capturing Non-cooperative Tumbling Objects

An End-to-End Trajectory Planning Strategy for Free-floating Space Robots