Abstract:This research presents a cost-effective surveying methodology to assist the seismic assessment of complex heritage buildings, based on terrestrial structure-from-motion (SfM) photogrammetry. The method was applied to the study of the seismic performance of the church of San Juan Bautista – Inca temple of Huaytará, Peru, an emblematic case study due to its complex architecture and coexistence of different construction materials. The geometrical model for the seismic assessment was developed with an error of less than 2 % using SfM photogrammetry. Non-linear static pushover analyses were performed on 3D FEM models of the nave and the towers to evaluate their individual response under seismic loading. Mechanical properties of different structural materials of the church were evaluated based on laboratory experimental tests on mortar and adobe, contemporary and ancient fired brick, Inca stone, colonial stone and rubble stone units. Non-linear pushover analyses were conducted in four directions perpendicular to the perimeter walls, and the response of the structure was compared with the seismic demand specified in Peruvian Standards. The simulations show that damage-prone areas are the western and eastern facades, with cracking at the connections between orthogonal walls, as well as at the interface of adobe masonry with Inca stone masonry. The towers exhibit similar seismic response, with lower strength capacities compared to the main nave. In this case, flexural overturning mechanisms and cracking at the interface between stone and adobe masonry were observed. The displacement-based seismic assessment using the N2 method shows that a peak ground acceleration of 0.21 g could lead to the collapse of the north and south facades of the main nave. The towers showed a much smaller capacity with PGA leading to collapse of approximately 0.09 g. Overall, this study contributes to the understanding of the seismic performance of the Huaytará-Huancavelica church, highlighting vulnerabilities and providing valuable information for its preservation and future interventions. Future investigations should focus on on-site tests that will allow the estimation of the effect of existing damage on the structural response and their incorporation in the numerical model.

RESTORATION TECHNIQUES AND ASEISMIC REINFORCEMENT FOR DISASTER RECOVERY OF THE BASILICA SAN FRANCESCO IN ASSISI, ITALY

Seismic Vulnerability Assessment of Historical Centers at Urban Scale

Introspection on Improper Seismic Retrofit of Basilica Santa Maria Di Collemaggio after 2009 Italian Earthquake

The Dynamic Behavior of the Basilica of San Francesco in Assisi Using Simplified Analytical Models

Considerations Regarding the Retrofit Intervention of Santa Maria Di Collemaggio Basilica in L'Aquila Following 2009 Italian Earthquake

A Multidisciplinary Study on the Seismic Vulnerability of St. Agostino Church in Amatrice following the 2016 Seismic Sequence

The Dynamic Behaviour of the Roof Interventions in the Basilica San Francesco in Assisi

Sensor Placement Strategies for the Seismic Monitoring of Complex Vaulted Structures of the Modern Architectural Heritage

Seismic performance assessment of the church of SS. Annunziata in Paestum through finite element analysis

Damage assessment of ancient masonry churches stroked by the Central Italy earthquakes of 2016 by the non-smooth contact dynamics method

Preservation and Protection of Cultural Heritage: Vibration Monitoring and Seismic Vulnerability of the Ruins of Carmo Convent (Lisbon)

Improving the dynamic behaviour of historic buildings using experimental data: application to a Baroque church

Synergistic application of operational modal analysis and ambient noise deconvolution interferometry for structural and damage identification in historic masonry structures: three case studies of Italian architectural heritage

An Integrated Data Acquisition Approach for the Structural Health Monitoring and Real-Time Earthquake Response Assessment of a Retrofitted Adobe Church in Peru

Cultural Heritage and Sustainable Development: Impact Assessment of Two Adaptive Reuse Projects in Siracusa, Sicily

Structural and seismic vulnerability assessment of the Santa Maria Assunta Cathedral in Catanzaro (Italy): classical and advanced approaches for the analysis of local and global failure mechanisms

Operational modal analysis, seismic vulnerability assessment and retrofit of a degraded RC bell tower

Photogrammetry-aided numerical seismic assessment of historical structures composed of adobe, stone and brick masonry. Application to the San Juan Bautista Church built on the Inca temple of Huaytará, Peru

Unloading and Reloading Process for the Earthquake Damage Repair of Ancient Masonry Columns: The Case of the Basilica di Collemaggio

Resilience Strategy After 2016 Central Italy Earthquake in Historical Centres: Seismic Vulnerability Assessment Method of Traditional Masonry Buildings

Francesco Valenti’s Restoration Design of Santissima Annunziata of Catalans Church in Messina. A Walkthrough Among Survey and Graphic Representation