Manufacture and application of a microfluidic chip-based 18F microreactor

Yong-ping ZHANG,Ying-jian ZHANG,Ming-wei WANG,Center PET
DOI: https://doi.org/10.3760/cma.j.issn.2095-2848.2013.04.015
2013-01-01
Abstract:Objective To develop a polydimethylsiloxane (PDMS) microfluidic chip-based 18F microreactor for the preparation of 18F-labeled probes.Methods The 18F microreactor was composed of PDMS microfluidic chip and customized glass microvessel integrating with stainless capillary tube (D 0.6 mm) as heater/cooler.PDMS chips were fabricated by silk-screen printing technology,a traditional and easily accessible process.18F-FDG and 18F-fluoroacetate(FAC) were synthesized using the 18F microreactor.TLC was applied to measure the 18F-labeling yield and the radiochemical purity of 18F-FDG and 18F-FAC.Results The size of PDMS chip was 40.0 mm (l)×30.0 mm (w)×6.0 mm(h) and the liquid/gas inside channel was 0.3 mm (w)×50.0 μm (h).The customized glass microvessel was about 4.0 mm (D) ×30.0 mm (h) with 200 μl of reaction volume.The capillary tube which wrapped around the microvessel functioned as a heater when electric current was provided,while as a cooler when compressed air went through.The integrated 18F microreactor with a total size of 40.0 mm (l) ×30.0 mm (w) ×15.0 mm (h) was successfully used to prepare 18F-FDG and 18F-FAC,whose radiochemical purity were both higher than 96% and 18F-labeling yield was 92.5% and 90.0% respectively in the first fluorination step.Conclusions A PDMS microfluidic chip-based 18F microreactor is developed and successfully applied to prepare 18F-FDG and 18F-FAC.It has the dual advantages of both microfluidc chip and traditional synthesis module and features of high integration,small total size and low consumption of labeling precursor.
What problem does this paper attempt to address?