Author Correction: Significantly Enhanced Energy Storage Density by Modulating the Aspect Ratio of BaTiO 3 Nanofibers

Dou Zhang,Xuefan Zhou,James Roscow,Kechao Zhou,Lu Wang,Hang Luo,Chris R. Bowen

DOI: https://doi.org/10.1038/S41598-020-65656-Z

IF: 4.6

2020-01-01

Scientific Reports

Abstract:n amendment to this paper has been published and can be accessed via a link at the top of the paper.

What problem does this paper attempt to address?

Significantly Enhanced Energy Storage Density By Modulating The Aspect Ratio Of Batio3 Nanofibers (Vol 7, 45179, 2017)

Dou Zhang,Xuefan Zhou,James Roscow,Kechao Zhou,Lu Wang,Hang Luo,Chris R. Bowen

DOI: https://doi.org/10.1038/s41598-020-65656-z

IF: 4.6

2020-01-01

Scientific Reports

Abstract:An amendment to this paper has been published and can be accessed via a link at the top of the paper.
Enhancement of Energy Density in Novel Ba0.67Sr0.33TiO3 Nanorod Array Nanocomposites

Lingmin Yao,Shaofeng Wu,Zhongbin Pan,Yipeng Tan,Feipeng Pi,Ruikun Wang,Jiwei Zhai,Haydn H. D. Chen

DOI: https://doi.org/10.1016/j.matdes.2020.109044

IF: 9.417

2020-01-01

Materials & Design

Abstract:The majority of the previously reported nanocomposites obtainable with higher energy density (>15 J cm−3) relies strongly on much higher breakdown strength (>4000 kV cm−1). The operation of capacitors in such higher applied electric field brings challenges because of the substantially increased the failure probability. In this study we explored the dispersibility and the orientation of fillers in nanocomposites as they play vital roles in the energy density. Based on the infinite element modulation results, an original design of 1–3 type composite structure was employed in the current study. This design adopts the one-dimensional (110)-oriented monodispersed barium strontium titanate Ba0.67Sr0.33TiO3 (BST) nanorod array as fillers embedded in the three-dimensional poly (−vinylidene fluoride) (PVDF) polymer matrix. With these originally designed BST/PVDF nanocomposites, we have demonstrated a significant enhancement of energy density at a lower applied electric field. For example, an energy density of 13.10 J cm−3 at electric field of 3400 kV cm−1 can be obtained, an enhancement of 3 times larger than that of bare PVDF. Moreover, the discharge efficiency is maintained at 69% at 3400 kV cm−1. The high performance of this originally designed nanacomposite demonstrated its potential application in the next generation energy storage devices.
Author Correction: Scalable synthesis of hierarchically structured carbon nanotube–graphene fibres for capacitive energy storage

Yu, Dingshan,Goh, Kunli,Wang, Hong,Wei, Li,Jiang, Wenchao,Zhang, Qiang,Dai, Liming,Chen, Yuan

DOI: https://doi.org/10.1038/s41565-020-0718-1

IF: 38.3

2020-01-01

Nature Nanotechnology

Abstract:An amendment to this paper has been published and can be accessed via a link at the top of the paper.
Author Correction: From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries

Darren H. S. Tan,Abhik Banerjee,Zheng Chen,Ying Shirley Meng

DOI: https://doi.org/10.1038/s41565-021-00877-5

IF: 38.3

2021-03-05

Nature Nanotechnology

Abstract:A Correction to this paper has been published: https://doi.org/10.1038/s41565-021-00877-5.

materials science, multidisciplinary,nanoscience & nanotechnology
A small loading of surface-modified Ba0.6Sr0.4TiO3 nanofiber-filled nanocomposites with enhanced dielectric constant and energy density

shaohui liu,jiwei zhai

DOI: https://doi.org/10.1039/c4ra04369c

IF: 4.036

2014-01-01

RSC Advances

Abstract:Compared to spherical ceramic fillers, ceramic fillers with large aspect ratios can increase the dielectric constant of nanocomposites at a much lower concentrations because their large dipole moments, and their smaller specific surface can help to reduce the surface energy and thus prevent the nanofillers from agglomerating in the polymer matrix. Therefore, high energy storage capability of the nanocomposite is obtained using surface-modified Ba0.6Sr0.4TiO3 nanofibers with a large aspect ratio (BST NF) by 3-aminopropyltriethoxysilane (APS) filling in a poly(vinylidene fluoride) polymer (PVDF) matrix. The nanocomposites exhibit enhanced dielectric constant and reduced loss tangents at a low volume fraction of surface-modified BST NF. The maximal energy density in the nanocomposite with 2.5 vol% BST NF-APS is about 6.8 J cm(-3) at 3800 kV cm(-1), about 143% higher than that of the PVDF of 2.8 J cm(-3) at 4000 kV cm(-1). The enhanced energy storage density could be attributed to the combined effects of surface modification by the APS, large aspect ratio and paraelectric polarization behavior of the BST NF. This work may provide a novel route for using the small loading of surface-modified paraelectric ceramic fillers with large aspect ratios for enhanced energy-storage density in polymer composites.
Correction to New Energy Storage Option: Toward ZnCo2O4 Nanorods/Nickel Foam Architectures for High-Performance Supercapacitors

Бо Лю,Boyang Liu,Qiufan Wang,Xianfu Wang,Qingyi Xiang,Di Chen,Guozhen Shen

DOI: https://doi.org/10.1021/am4059638

IF: 9.5

2014-01-01

ACS Applied Materials & Interfaces

Abstract:ADVERTISEMENT RETURN TO ISSUEPREVAddition/CorrectionORIGINAL ARTICLEThis notice is a correctionCorrection to New Energy Storage Option: Toward ZnCo2O4 Nanorods/Nickel Foam Architectures for High-Performance SupercapacitorsBin Liu, Boyang Liu, Qiufan Wang, Xianfu Wang, Qingyi Xiang, Di Chen*, and Guozhen Shen*Cite this: ACS Appl. Mater. Interfaces 2014, 6, 3, 2199Publication Date (Web):January 15, 2014Publication History Published online15 January 2014Published inissue 12 February 2014https://doi.org/10.1021/am4059638Copyright © 2014 American Chemical SocietyRequest reuse permissions This publication is free to access through this site. Learn MoreArticle Views1229Altmetric-Citations7LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InReddit PDF (838 KB) Get e-Alertsclose Get e-Alerts
Enhanced Dielectric and Energy Storage Density Induced by Surface-Modified BaTiO3 Nanofibers in Poly(vinylidene Fluoride) Nanocomposites

Shaohui Liu,Shuangxi Xue,Wenqin Zhang,Jiwei Zhai

DOI: https://doi.org/10.1016/j.ceramint.2014.07.083

IF: 5.532

2014-01-01

Ceramics International

Abstract:A high energy-storage density ceramic–polymer nanocomposite is fabricated by incorporating high aspect ratio functionalized BaTiO3 nanofibers (BT NF) prepared via electrospinning into a polyvinylidene-fluoride (PVDF) matrix. The functionalized BT NF by 3-aminopropyltriethoxysilane (APS) not only exhibited excellent compatibility with poly(vinylidene fluoride) (PVDF), but significantly enhanced the dielectric properties of the nanocomposites. The dielectric constant of the nanocomposite reached up to 24 with a dielectric loss of 0.018 at 1kHz with a BT NF-APS concentration of 7.5vol%. The maximal energy-storage density in the nanocomposite with 2.5vol% BT NF-APS is about 5.6J/cm3 at 3300kV/cm, which is over 220% higher than that of the PVDF at the same electric field. The enhanced energy-storage density could be attributed to the combined effects of the APS surface modification, large aspect ratio and ferroelectric polarization behavior of the BT NF.
Excellent energy density of polymer nanocomposites containing BaTiO3@Al2O3 nanofibers induced by moderate interfacial area

Zhongbin Pan,Lingmin Yao,Jiwei Zhai,Bo Shen,Shaohui Liu,Haitao Wang,Jinhua Liu

DOI: https://doi.org/10.1039/c6ta05233a

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:A moderate interfacial area results in significantly enhancement of electric breakdown strength in BaTiO3@Al2O3 nanocomposites. An energy density of ≈12.18 J cm−3 is achieved with a small loading of 5 vol% BaTiO3@Al2O3 nfs.
Significantly Enhanced Energy Storage Performances and Power Density in (1 − X)bczt-Xsbt Lead-Free Ceramics Via Synergistic Optimization Strategy

Cheng Shi,Fei Yan,Guanglong Ge,Yongqi Wei,Jiwei Zhai,Wu Yao

DOI: https://doi.org/10.1016/j.cej.2021.130800

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Under the burgeoning call towards miniaturization and environmental-friendliness, it is of paramount importance in developing lead-free dielectrics for energy storage applications. However, obstacles stand out concerning to the incomprehensive energy storage properties of the lead-free dielectric ceramics. Here, a synergistic optimization strategy is proposed involving the Sr0.7Bi0.2TiO3 (SBT) modified Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT), where the as-obtained (1-x)BCZT-xSBT ceramics exhibit an excellent recoverable energy storage density (4.02 J/cm3) with high energy storage efficiency (93.49%) at high electric field of 480 kV/cm. Meanwhile, ultra-fast discharge time (t0.9) of 103 ns and high power density (PD) of 237.83 MW/cm3 have been concurrently realized. Temperature-dependent Raman spectroscopy and piezo-response force microscopy (PFM) are conducted to reveal the mechanisms for the superior properties achieved, which ascertain the quick reversibility of domains and relaxor ferroelectric behaviors in the (1-x)BCZT-xSBT ceramics. This work underpins the significance of synergistic optimization in enhancing the energy storage properties for lead-free dielectrics and promoting their applications in energy storage devices.
Author Correction: Interstitial boron-doped mesoporous semiconductor oxides for ultratransparent energy storage

Jian Zhi,Min Zhou,Zhen Zhang,Oliver Reiser,Fuqiang Huang

DOI: https://doi.org/10.1038/s41467-021-21705-3

IF: 16.6

2021-03-01

Nature Communications

Abstract:A Correction to this paper has been published: https://doi.org/10.1038/s41467-021-21705-3

multidisciplinary sciences
Correction: Aliovalent A-site engineered AgNbO3 lead-free antiferroelectric ceramics toward superior energy storage density

Nengneng Luo,Kai Han,Fangping Zhuo,Chao Xu,Guangzu Zhang,Laijun Liu,Xiyong Chen,Changzheng Hu,Huanfu Zhou,Yuezhou Wei

DOI: https://doi.org/10.1039/c9ta90145k

2019-01-01

Abstract:Correction for ‘Aliovalent A-site engineered AgNbO3 lead-free antiferroelectric ceramics toward superior energy storage density’ by Nengneng Luo <italic>et al.</italic>, <italic>J. Mater. Chem. A</italic>, 2019, DOI: 10.1039/c9ta02053e.
Enhanced Energy Storage Density in Poly(vinylidene Fluoride) Nanocomposites by a Small Loading of Suface-Hydroxylated Ba0.6Sr0.4TiO3 Nanofibers.

Liu Shaohui,Zhai Jiwei,Wang Jinwen,Xue Shuangxi,Zhang Wenqin

DOI: https://doi.org/10.1021/am4042096

IF: 9.5

2014-01-01

ACS Applied Materials & Interfaces

Abstract:The ceramic-polymer nanocomposites consisting of Ba0.6Sr0.4TiO3 nanofibers (BST60 NF) with a large aspect ratio prepared via electrospinning and employing surface hydroxylated as fillers and poly(vinylidene fluoride) (PVDF) as matrix have been fabricated by a solution casting method. The nanocomposites exhibit enhanced permittivity, reduced loss tangents and improved breakdown electric field strength at a low volume fraction of hydroxylated BST60 NF. The energy density of the nanocomposites is significantly enhanced, and the maximal energy density of 6.4 J/cm(3) is obtained in the composite material with 2.5 wt % hydroxylated BST60 NF, which is more than doubled as compared with the pure PVDF. Such significant enhancements result from combined effect of the large aspect ratio, the surface modification and the improved crystallinity of the nanocomposites induced by the hydroxylated BST60 NF. This work may provide a route for using the hydroxylated ceramic nanofibers to enhance the dielectric energy density in ceramic-polymer nanocomposites.
Significantly Enhanced Permittivity and Energy Density in Dielectric Composites with Aligned BaTiO3 Lamellar Structures

Ru Guo,James I. Roscow,Chris R. Bowen,Hang Luo,Yujuan Huang,Yupeng Ma,Kechao Zhou,Dou Zhang

DOI: https://doi.org/10.1039/c9ta11360f

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:A significant improvement of permittivity and energy density will enable the miniaturization of dielectric capacitors and promote integration for applications in electrical power and defense systems.
Author Correction: A high-energy and long-cycling lithium–sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites

Chen Zhao,Gui-Liang Xu,Zhou Yu,Leicheng Zhang,Inhui Hwang,Yu-Xue Mo,Yuxun Ren,Lei Cheng,Cheng-Jun Sun,Yang Ren,Xiaobing Zuo,Jun-Tao Li,Shi-Gang Sun,Khalil Amine,Tianshou Zhao

DOI: https://doi.org/10.1038/s41565-020-00829-5

IF: 38.3

2020-12-03

Nature Nanotechnology

Abstract:A Correction to this paper has been published: https://doi.org/10.1038/s41565-020-00829-5.

materials science, multidisciplinary,nanoscience & nanotechnology
Correction To: Enhanced Energy Density and Electric Cycling Reliability Via MnO2 Modification in Sodium Niobate‐based Relaxor Dielectric Capacitors

Yang Letao,Kong Xi,Cheng Zhenxiang,Zhang Shujun

DOI: https://doi.org/10.1557/s43578-020-00085-2

2021-01-01

Abstract:A correction to this paper has been published: https://doi.org/10.1557/s43578-021-00217-2
Correction: Flexible BaTiO3/PVDF Gradated Multilayer Nanocomposite Film with Enhanced Dielectric Strength and High Energy Density

Y. N. Hao,X. H. Wang,S. O'Brien,J. Lombardi,L. T. Li

DOI: https://doi.org/10.1039/c5tc90168e

IF: 6.4

2015-01-01

Journal of Materials Chemistry C

Abstract:Correction for ‘Flexible BaTiO3/PVDF gradated multilayer nanocomposite film with enhanced dielectric strength and high energy density’ by Y. N. Hao et al., J. Mater. Chem. C, 2015, 3, 9740–9747.
Ultra-high discharged energy density capacitor using high aspect ratio Na0.5Bi0.5TiO3 nanofibers

Hang Luo,James Roscow,Xuefan Zhou,Sheng Chen,Xianghui Han,Kechao Zhou,Dou Zhang,Chris R. Bowen

DOI: https://doi.org/10.1039/c7ta00136c

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Ceramic/polymer nanocomposites are attractive for energy storage applications due to their ability to exploit the high permittivity of ceramic fillers and high breakdown strength of the polymer matrix. One challenge for the development of high performance nanocomposites based on ceramic particulates or fibers in a polymer matrix is that they often require a high volume fraction (>50%) to achieve a high permittivity, which is often at the expense of a reduction in dielectric strength and mechanical flexibility. In this paper we demonstrate by both experiment and finite element simulation that high aspect ratio nanofiber fillers offer an effective approach to achieve high energy density and dielectric strength. Lead-free ferroelectric Na0.5Bi0.5TiO3 (BNT) nanofibers with a high aspect ratio (>200) are synthesized by a hydrothermal method and dispersed in a poly(vinylidene difluoride-co-hexafluoropropylene) (P(VDF-HFP)) matrix. The increased fraction of beta-phase and the alignment of BNT nanofibers perpendicular to the direction of the applied electric field lead to an enhanced dielectric strength, compared to spherical BNT/P(VDF-FHP) nanoparticles and pure P(VDF-HFP), and experimental measurements are compared with numerical simulations. The results demonstrate that the nanofiber nanocomposites exhibited an ultra-high discharged energy density (12.7 J cm(-3)) and provide an innovative approach to produce high-energy storage density materials.
Correction: Aliovalent A-site engineered AgNbO3 lead-free antiferroelectric ceramics toward superior energy storage density

Nengneng Luo,Kai Han,Fangping Zhuo,Chao Xu,Guangzu Zhang,Laijun Liu,Xiyong Chen,Changzheng Hu,Huanfu Zhou,Yuezhou Wei

DOI: https://doi.org/10.1039/c9ta90145k

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Correction for ‘Aliovalent A-site engineered AgNbO3 lead-free antiferroelectric ceramics toward superior energy storage density’ by Nengneng Luo et al., J. Mater. Chem. A, 2019, DOI: 10.1039/c9ta02053e.
Correction: BaTiO3–BiYbO3 Perovskite Materials for Energy Storage Applications

Zhengbo Shen,Xiaohui Wang,Bingcheng Luo,Longtu Li

DOI: https://doi.org/10.1039/c6ta90102f

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Correction for ‘BaTiO3–BiYbO3 perovskite materials for energy storage applications’ by Zhengbo Shen et al., J. Mater. Chem. A, 2015, 3, 18146–18153.
Significantly improved energy density of BaTiO3 nanocomposites by accurate interfacial tailoring using a novel rigid-fluoro-polymer

Sheng Chen,Xuguang Lv,Xianghui Han,Hang Luo,Chris R. Bowen,Dou Zhang

DOI: https://doi.org/10.1039/c7py01914a

IF: 4.6

2018-01-01

Polymer Chemistry

Abstract:Dielectric nanocomposites incorporating core-shell structured nanoparticles have drawn increasing attention in recent years for energy storage applications. Among the many key factors, the thickness and the chemical structure of the interfacial layer are rarely investigated. This work presents a novel approach to precisely tailor the interfacial layer thicknesses by modulating the polymerization degree of a rigid liquid-crystalline fluoro-polymer. BaTiO3@ rigid-fluoro-polymer nanoparticles with a range of interfacial thicknesses were prepared by a surface-initiated reversible-addition-fragmentation chain transfer polymerization method. The frequency dependent dielectric properties and energy storage capability of dielectric nanocomposites based on a poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) P(VDF-TrFE-CTFE) matrix and the modified BaTiO3 nanofiller were investigated. The results demonstrated that the permittivity, breakdown strength and energy density of the polymer nanocomposites were significantly affected by the thickness of the rigid-fluoro-polymer shell around BaTiO3. Moreover, a high discharged energy density of 16.18 J cm(-3) was achieved in nanocomposites containing 5 vol% BaTiO3, when the shell thickness was approximately 11 nm. The findings provide a new and innovative approach to prepare dielectric composites with high energy density, and enable a deeper understanding of the influence of the interfacial layer thickness on the dielectric performance.

Author Correction: Significantly Enhanced Energy Storage Density by Modulating the Aspect Ratio of BaTiO 3 Nanofibers

Significantly Enhanced Energy Storage Density By Modulating The Aspect Ratio Of Batio3 Nanofibers (Vol 7, 45179, 2017)

Enhancement of Energy Density in Novel Ba0.67Sr0.33TiO3 Nanorod Array Nanocomposites

Author Correction: Scalable synthesis of hierarchically structured carbon nanotube–graphene fibres for capacitive energy storage

Author Correction: From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries

A small loading of surface-modified Ba0.6Sr0.4TiO3 nanofiber-filled nanocomposites with enhanced dielectric constant and energy density

Correction to New Energy Storage Option: Toward ZnCo2O4 Nanorods/Nickel Foam Architectures for High-Performance Supercapacitors

Enhanced Dielectric and Energy Storage Density Induced by Surface-Modified BaTiO3 Nanofibers in Poly(vinylidene Fluoride) Nanocomposites

Excellent energy density of polymer nanocomposites containing BaTiO<sub>3</sub>@Al<sub>2</sub>O<sub>3</sub> nanofibers induced by moderate interfacial area

Significantly Enhanced Energy Storage Performances and Power Density in (1 − X)bczt-Xsbt Lead-Free Ceramics Via Synergistic Optimization Strategy

Author Correction: Interstitial boron-doped mesoporous semiconductor oxides for ultratransparent energy storage

Correction: Aliovalent A-site engineered AgNbO3 lead-free antiferroelectric ceramics toward superior energy storage density

Enhanced Energy Storage Density in Poly(vinylidene Fluoride) Nanocomposites by a Small Loading of Suface-Hydroxylated Ba0.6Sr0.4TiO3 Nanofibers.

Significantly Enhanced Permittivity and Energy Density in Dielectric Composites with Aligned BaTiO3 Lamellar Structures

Author Correction: A high-energy and long-cycling lithium–sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites

Correction To: Enhanced Energy Density and Electric Cycling Reliability Via MnO2 Modification in Sodium Niobate‐based Relaxor Dielectric Capacitors

Correction: Flexible BaTiO3/PVDF Gradated Multilayer Nanocomposite Film with Enhanced Dielectric Strength and High Energy Density

Ultra-high discharged energy density capacitor using high aspect ratio Na0.5Bi0.5TiO3 nanofibers

Correction: Aliovalent A-site engineered AgNbO<sub>3</sub> lead-free antiferroelectric ceramics toward superior energy storage density

Correction: BaTiO3–BiYbO3 Perovskite Materials for Energy Storage Applications

Significantly improved energy density of BaTiO3 nanocomposites by accurate interfacial tailoring using a novel rigid-fluoro-polymer