Abstract:This study explored the feasibility of employing computer-aided design (CAD) and 3 dimensional (3D)-printed personalized guide plate for the mini-invasive percutaneous internal screw fixation of fractured scaphoid. The study consisted of two parts: (1) experimentation on upper limbs from corpses and (2) preliminary clinical application. Corpse experiments involved upper limbs of 6 adult corpses. The specimens of upper limbs were subjected to plain CT scan. Then the CT data were input into computer to conduct 3D reconstruction of wrist region. The direction and depth of the guide wire and screw were designed on the basis of the principle that screw should lie at the center of scaphoid and the long axis of the screw should be aligned with that of the scaphoid. The carpal bone model and the guide plate were designed and 3D-printed. By using the guide plates, the guide wire was placed and the cannulated compression screw was inserted. The wrist region was examined by X-ray and CT to observe the location of the screw in the scaphoid. The scaphoid was longitudinally excised to grossly observe the location and evaluate the result of screw insertion. For clinical application, the guide plate was employed in 4 patients with fresh scaphoid fracture using the aforementioned operative technique. Our results showed that, in the 6 corpse limbs, the guide plate well fitted the skin surface and the guide wire and screw were accurately put in place in one session. X-ray examination and gross observation confirmed that the screw was satisfactorily positioned and the result met the requirements of the preoperative design. For 4 patients, the guide wire and screw were all precisely inserted into place in one session. The operation time and X-ray exposure times were apparently reduced. The imaging examination exhibited satisfactory results and the hand functioned well. It was concluded that the operative guide plate used for the mini-invasive percutaneous internal screw fixation of fractured scaphoid not only can assist in accurate placement of screw but also shorten operation time and reduce insertion and X-ray exposure times, thereby reducing the radiation injury and damage to the substance and the blood circulation of carpal bone. Its use can also improve the learning curve of surgeons.

Computer-assisted navigation for percutaneous scaphoid screw placement: A preliminary study

Experimental Study and Preliminary Clinical Application of Mini-invasive Percutaneous Internal Screw Fixation for Scaphoid Fracture under the Guidance of a 3D-Printed Guide Plate

Computer Navigation Assisted Pedicle Screw Placement

Computer-navigation in Surgery of Orthopaedics

Thoracolumbar Pedicle Screw Fixation with C-arm Navigation

Percutaneous Insertion of Sacroiliac Joint Screws under Real-Time 3D Navigation

Experimental study and clinical applications of computer assisted navigation technique in spinal surgery

Robot-assisted percutaneous scaphoid fixation: patient-reported outcomes and learning curve at two centres

Design and Application of Individualized, 3-Dimensional-Printed Navigation Template for Placing Cortical Bone Trajectory Screws in Middle-Upper Thoracic Spine: Cadaver Research Study

[Clinical Contrast of Cervical Pedicle Screw Fixation Assisted by C-arm Fluoroscopy or 3D Navigation System].

CT-Navigated Spinal Instrumentations-Three-Dimensional Evaluation of Screw Placement Accuracy in Relation to a Screw Trajectory Plan

Accuracy of pedicle screw placement in the thoracic and lumbosacral spines using O-arm-based navigation versus conventional freehand technique

Three-dimensional-printed patient-specific Kirschner-wire guide for percutaneous fixation of undisplaced scaphoid fractures: a cadaveric study

Robot-assisted vs traditional percutaneous freehand for the scaphoid fracture treatment: a retrospective study

Image guidance can support scaphoid K-wire insertion: an experimental study and initial clinical experience

Development and evaluation of robot‐assisted ultrasound navigation system for pedicle screw placement: An ex‐vivo animal validation

Percutaneous thoraco-lumbar-sacral pedicle screw placement accuracy results from a multi-center, prospective clinical study using a skin marker-based optical navigation system

Precision and effort in robot-assisted placement of pedicle screws compared to standard surgical navigation

Comparison of the Clinical Accuracy of Cervical (C2-C7) Pedicle Screw Insertion Assisted by Fluoroscopy, Computed Tomography-Based Navigation, and Intraoperative Three-Dimensional C-arm Navigation.

An Integrated 3-Dimentional Navigation System Increases the Accuracy, Efficiency, and Safety of Percutaneous Thoracolumbar Pedicle Screw Placement in Minimally Invasive Approaches: A Randomized Cadaveric Study

[Accuracy of CT-based Navigation of Pedicle Screws Implantation in the Cervical Spine Compared with X-ray Fluoroscopy Technique].