Self-Alignment MEMS IMU Method Based on the Rotation Modulation Technique on a Swing Base.
Haifeng Xing,Zhiyong Chen,Haotian Yang,Chengbin Wang,Zhihui Lin,Meifeng Guo
DOI: https://doi.org/10.3390/s18041178
IF: 3.9
2018-01-01
Sensors
Abstract:The micro-electro-mechanical-system (MEMS) inertial measurement unit (IMU) has been widely used in the field of inertial navigation due to its small size, low cost, and light weight, but aligning MEMS IMUs remains a challenge for researchers. MEMS IMUs have been conventionally aligned on a static base, requiring other sensors, such as magnetometers or satellites, to provide auxiliary information, which limits its application range to some extent. Therefore, improving the alignment accuracy of MEMS IMU as much as possible under swing conditions is of considerable value. This paper proposes an alignment method based on the rotation modulation technique (RMT), which is completely self-aligned, unlike the existing alignment techniques. The effect of the inertial sensor errors is mitigated by rotating the IMU. Then, inertial frame-based alignment using the rotation modulation technique (RMT-IFBA) achieved coarse alignment on the swing base. The strong tracking filter (STF) further improved the alignment accuracy. The performance of the proposed method was validated with a physical experiment, and the results of the alignment showed that the standard deviations of pitch, roll, and heading angle were 0.0140 degrees, 0.0097 degrees, and 0.91 degrees, respectively, which verified the practicality and efficacy of the proposed method for the self-alignment of the MEMS IMU on a swing base.