Abstract:Seepage-induced losses of fine particles from the matrix of coarse fraction (i.e., suffusion) and the subsequent collapse of the force transmission structure of the gap-graded soil is a severe threat to the stability of hydraulic structure such as dams. The gap-graded soil element at different locations within such geo-structure suffers different anisotropic stress conditions and flow directions. The influences of both anisotropic stress condition and flow direction on suffusion must be considered in practice, but it remains unclear. This paper presents a three-dimensional coupled CFD-DEM investigation into suffusion considering different anisotropic stress conditions and flow directions in gap-graded granular soils from both macroscopic and microscopic perspectives. It is found that the fine particles in the samples with higher anisotropic stress ratios have larger initial contact anisotropy and friction mobilization, both facilitating the erosion of these participles. For the sample with high initial contact anisotropy, the soil contact fabric is approaching isotropic during suffusion due to the erosion of the fine particles even though the stress anisotropy of the sample is kept. The sample with the major principal stress direction close to the seepage flow direction is prone to be eroded during suffusion, since the seepage forces applied to the particles increase the contact number and contact forces in the flow direction, which enhances the contact anisotropy and stress anisotropy of sample and thus increases the cumulative fine particles loss. It is also found that the contact-based fabric anisotropy variable A can be used to feature the suffusion susceptibility of samples under combined effects of stress anisotropy and flow directions.

Application of Particle Densimetric Froude Number for Evaluating the Maximum Culvert Scour Depth (vol 84, pg 931, 2020)

Application of Particle Densimetric Froude Number for Evaluating the Maximum Culvert Scour Depth

Evaluation of Sediment Gradation Effects on Clear-Water Pier Scour with Densimetric Froude Number

Application and Design of an Efficient Siphon Dewatering System for Debris Flow Mitigation: A Case Study of a Small Catchment in Zhejiang Province, China

Analysis and Inspection on Siltation of Intercepting Combined Sewer System

New Formula for Scour Depth at Piles Based on Energy Equilibrium

Numerical study of sediment scour at meander flume outlet of boxed culvert diversion work

Unified Criterion for Clear‐Water Local Scour Induced by Junction Flows and Wall Jets

Estimation of Maximum Local Scour Depths at Multiple Piles of Sea/Bay-crossing Bridges

Micromechanical Investigation of Suffusion and Its Consequence in Gap-Graded Granular Soil at the Opening of Underground Structures Using the Coupled CFD-DEM Method

Experimental Study on Local Scour Depth Around Pile Groups

Numerical Simulation of Local Scour and Flow Field Around Pipelines

A Coupled CFD-DEM Investigation into Suffusion of Gap-Graded Soil Considering Anisotropic Stress Conditions and Flow Directions

Length Scale for Evaluating Wave-Induced Pipeline Scour

Scaling of Scour Depth at Bridge Pier Based on Characteristic Dimension of Large-Scale Vortex

Scour of Cohesive Nonuniform Sediment

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

Estimate of Sediment Pickup Rate with the Densimetric Froude Number

Length Parameter for Scaling Abutment Scour Depth

Scaling Analysis of Pier-Scouring Processes

Estimation of the critical hydraulic gradient of coarse soil using the DEM-CFD coupling method