Abstract:The aim of this study was to evaluate the use of self-organized TiO2 nanotube arrays (TNAs) as immobilized catalyst and UV-LED as light source (UV-LED/TNAs) for photocatalytic degradation of the beta-blocker metoprolol (MTP) from aqueous solution. Firstly we employed electrochemical anodization to synthesize self-organized TNAs, and the effect of anodization potential and annealing temperature was examined. Characterization by SEM demonstrated a linear relation between the diameter of TiO2 nanotubes produced and the anodization potential, while Raman measurement revealed the vital role of annealing on crystallographic composition of the anodic produced TiO2 nanotubes. Regarding their performance in photocatalytic MTP degradation, surface morphology and crystallographic composition of the TNAs were found to impose crucial influence: only TNAs with diameter not smaller than 53 nm enabled rapid MTP degradation, and highest MTP degradation was obtained when a mixture of anatase and ruffle were present in the TNAs. Secondly, the effect of operational parameters, Le initial MTP concentration, pH, was investigated. Initial MTP concentration at low level had no detrimental effect on the process performance. Rapid MTP degradation and high total removal were achieved in a wide pH range (3-11). To evaluate the applicability of TNAs for water treatment, experiments were first carried out in the presence of three different commonly present water constituents, Le bicarbonate ions, phosphate ions, and natural organic matters (NOMs). The results show that bicarbonate and phosphate ions have no inhibitory effect at concentration levels up to 200 mg/L, and NOMs exhibit detrimental effect when their concentration exceeds 5 mg/L. The total removal MTP degradation reduced from 87.09 +/- 0.09% to 62.05 +/- 0.08% when tap water samples were applied, demonstrating reasonable efficacy for practical applications. Regarding the degradation mechanism, formic acid and tert-butanol were added as scavenger for photo generated holes (h(+)) and hydroxyl radicals (center dot OH), respectively. The obtained results demonstrate that primary degradation process occurred in liquid phase with participation of hydroxyl radicals in the liquid phase (center dot OH (liquid)), while smaller portion of MTP were degraded on the catalysis surface via reaction with h(+) and hydroxyl radicals adsorbed on the catalyst surface (center dot OH (surface)). Other reactive species, e.g photo generated electrons and superoxide radical anions, did also play a minor role in MTP degradation. The mechanistic aspect was further confirmed by identification of degradation products by LC-MS/MS. The TNAs exhibited good stability after repeated use under varied operation conditions.

Photocatalytic Oxidative Degradation of Carbamazepine by TiO2 Irradiated by UV Light Emitting Diode

Efficient Degradation Of Carbamazepine In Aqueous Solution By Bismuth Oxybromide-Activated Peroxide Oxidation

Degradation of Carbamazepine and Toxicity Evaluation Using the UV/persulfate Process in Aqueous Solution

UVC-assisted Photocatalytic Degradation of Carbamazepine by Nd-doped Sb2O3/TiO2 Photocatalyst

Photocatalysis of Carbamazepine Via Activating Bisulfite by Ultraviolet: Performance, Transformation Mechanism, and Residual Toxicity Assessment of Intermediates Products.

Comparative Study of the Degradation of Carbamazepine in Water by Advanced Oxidation Processes

High Visible-Light Catalytic Activity of Bis-PDI-T@TiO2 for Activating Persulfate Toward Efficient Degradation of Carbamazepine

Photoelectrocatalytic degradation of carbamazepine using Ti/TiO2 nanostructured electrodes deposited by means of a pulsed laser deposition process

Photocatalytic Degradation of Carbamazepine Using Hierarchical Biocl Microspheres: Some Key Operating Parameters, Degradation Intermediates and Reaction Pathway

TiO<sub>2</sub>-Based photocatalyst modified with a covalent triazine-based framework organocatalyst for carbamazepine photodegradation

Photocatalytic persulfate activation by highly dispersed nano-TiO 2 supported by silica for efficient carbamazepine degradation

Insights in the Aqueous and Adsorbed Photocatalytic Degradation of Carbamazepine by a Biosourced Composite: Kinetics, Mechanisms and DFT Calculations

Visible-light Induced Activation of Persulfate by Self-Assembled EHPDI/TiO2 Photocatalyst Toward Efficient Degradation of Carbamazepine

Degradation of the antiepileptic drug carbamazepine upon different UV-based advanced oxidation processes in water

Enhanced oxidation of carbamazepine by UV-LED/persulfate and UV-LED/H2O2 processes in the presence of trace copper ions

Photocatalytic persulfate activation by highly dispersed nano-TiO<sub>2</sub> supported by silica for efficient carbamazepine degradation

Highly Efficient S-scheme AgBr/BiOBr with Visible Light Photocatalytic Performance for Carbamazepine Degradation: Mechanism Insight and Toxicity Assessment

Hydrochar-mediated Photocatalyst Fe3O4/BiOBr@HC for Highly Efficient Carbamazepine Degradation under Visible LED Light Irradiation

Solar-initiated Photocatalytic Degradation of Carbamazepine on Excited-State Hexadecachlorophthalocyanine in the Presence of Peroxymonosulfate

Photocatalytic degradation of carbamazepine by tailored BiPO4: Efficiency, intermediates and pathway

Photocatalytic Degradation of Metoprolol by TiO2 Nanotube Arrays and UV-LED: Effects of Catalyst Properties, Operational Parameters, Commonly Present Water Constituents, and Photo-Induced Reactive Species