Abstract:High performance thin film composite (TFC) membranes for reverse osmosis applications were fabricated by coating solutions of highly chlorine-tolerant disulfonated directly copolymerized poly(arylene ether sulfone) random copolymers (BPS-XX, e.g., BPS-20 and 32) on a commercially available porous polysulfone (e.g., Udel®) support. Solvents used in the formation of the TFCs must dissolve the sulfonated polysulfones used as the skin materials, while not harming the non-sulfonated polysulfone support membrane. For this purpose, environmentally friendly solvents were selected via a systematic screening process using a triangular solubility diagram. However, these benign solvents [e.g., di(ethylene glycol)] generally have high boiling points (>∼190°C). Thus, they necessitate the use of a special TFC formation process, since solvent evaporation at high temperatures caused pore shrinkage in the polysulfone support membrane and could lead to a catastrophic decrease in membrane water permeance. Support membranes were initially immersed in an IPA/glycerin mixture, after which the IPA was allowed to evaporate, leaving glycerin within the membrane pore structure. After a repeated coating procedure using dilute BPS-XX solutions, the TFC membranes were dried under vacuum at elevated temperatures. During this process, the glycerin reduced pore penetration of BPS-XX and prevented pore collapse during the drying procedures. Finally, water-miscible glycerin was eliminated via water treatment. The newly developed coating method formed ultra-thin and defect-free BPS-XX layers on a micro-porous Udel® support membrane. For example, BPS-32 TFC membranes showed NaCl rejection (∼97%), similar to that of its dense membranes. Furthermore, decreasing the amount of coating solution and, therefore, the BPS-32 coating thickness, resulted in improved pure water flux. The TFC water flux was further improved and was accompanied by small reduction in salt rejection after various TFC membrane treatments (e.g., in situ acidification or IPA treatment).

Thin film composite membranes: Does the porous support truly have negligible resistance?

Effect of mixed crosslinking agents on performance of thin-film-composite membranes

Influence of support-layer deformation on the intrinsic resistance of thin film composite membranes

Artificial Water Channels Engineered Thin-Film Nanocomposite Membranes for High-Efficient Application in Water Treatment

Novel Insights into the Interplay Between Support and Active Layer in the Thin Film Composite Polyamide Membranes

Preparation of Reverse Osmosis Composite Membrane with High Flux by Interfacial Polymerization of Mpd and Tmc

Thin Film Composite Membrane with Improved Permeance for Reverse Osmosis and Organic Solvent Reverse Osmosis

A Robust Thin Film Composite Membrane Incorporating Thermally Rearranged Polymer Support for Organic Solvent Nanofiltration and Pressure Retarded Osmosis

Novel thin film composite membranes supported by cellulose triacetate porous substrates for high-performance forward osmosis

A Highly Robust and Water Permeable Thin Film Composite Membranes for Pressure Retarded Osmosis Generating 26 W·m−2 at 21 Bar

Enhancing water permeability and antifouling performance of thin–film composite membrane by tailoring the support layer

Influence of Active Layer and Support Layer Surface Structures on Organic Fouling Propensity of Thin-Film Composite Forward Osmosis Membranes

Synergetic effects of COFs interlayer regulation and surface modification on thin-film nanocomposite reverse osmosis membrane with high performance

Disulfonated Poly(arylene Ether Sulfone) Random Copolymer Thin Film Composite Membrane Fabricated Using a Benign Solvent for Reverse Osmosis Applications

Using nanocomposite materials technology to understand and control reverse osmosis membrane compaction

Preparation of Hollow Fibre Composite Reverse Osmosis Membrane

Design and preparation of woven fabric-reinforced substrate: A new pathway for robust thin film composite membrane

Engineering dense/porous composite membranes through hydrodynamic polymerization for ultrahigh permselective forward osmosis

Optimizing Water Treatment: Reverse Osmosis and Nanofiltration Membrane Performance with a Focus on the Influence of Active Layer Thickness and Porosity

Effects of Porous Supports in Thin-Film Composite Membranes on CO2 Separation Performances

Preparation and Properties of Thin-Film Composite Forward Osmosis Membranes Supported by Cellulose Triacetate Porous Substrate via a Nonsolvent-Thermally Induced Phase Separation Process