Abstract:The model of vapor condensation heat transfer on downward-facing surfaces with different wettabilities is built by a two-dimensional (2D) lattice Boltzmann method. Dynamic evolution of condensate microdroplets on different wettability surfaces is simulated and the influence on heat transfer performance is analyzed. Moreover, the mechanism of a heterogeneous wettability surface enhancing condensation heat transfer is explored by investigating the condensate behaviors in the process of condensation. The numerical results indicate that as the contact angle of the homogeneous wettability surface increases, the initial nucleation time of the condensate is prolonged, while the departure time of the condensate is reduced significantly. The temperature adjacent to the gas–liquid interface, especially in the three-phase contact line region, is much higher than elsewhere due to the release of latent heat during condensation. Coalescence and detachment behaviors of condensate droplets cause the average heat flux to fluctuate locally with time. For the hybrid wettability surface, if the proportion of hydrophobic regions is small, the condensation heat transfer performance will be deteriorated. However, increasing the hydrophobic–hydrophilic ratio has a positive effect on enhancing heat transfer. It is found that a critical hydrophobic–hydrophilic ratio exists to optimize the heat transfer performance. For the gradient wettability surface, directional migration induced by capillary force facilitates the removal of condensate droplets, thereby enhancing the condensation heat transfer. Furthermore, a larger wetting gradient benefits to further improve the heat transfer performance. The results are valuable for optimally designing the heat transfer enhancement of vapor condensation on functionalized surfaces with heterogeneous wettability.This article has not yet been cited by other publications.

Improved modeling of heat transfer in dropwise condensation

Advances in modeling investigations of multimode dropwise condensation heat transfer on smooth and textured surfaces – A review

Theoretical Study of Dropwise Condensation Heat Transfer: Effect of the Liquid-Solid Surface Free Energy Difference

Modeling Study on Heat Transfer in Marangoni Dropwise Condensation for Ethanol-Water Mixture Vapors

The condensation characteristics of individual droplets during dropwise condensation

Dropwise Condensation Heat Transfer Model Considering the Liquid-Solid Interfacial Thermal Resistance

An Improved Model Based on Real Gas State Equation and Fog Formation for Condensation Heat and Mass Transfer

Dropwise Condensation Theory Revisited Part II. Droplet Nucleation Density and Condensation Heat Flux

A Molecular Dynamics Study on Heat and Mass Transfer in Condensation over Smooth/rough Surface

An improved mass transfer model for film condensation numerical simulation

Lattice Boltzmann Modeling of Condensation Heat Transfer on Downward-Facing Surfaces with Different Wettabilities

Theoretical Investigation of Stable Dropwise Condensation Heat Transfer on A Horizontal Tube

A Droplet Model in Steam Condensation with Gas Mixtures

Heat transfer model of thermosyphon condenser based on dropwise and film co-existing condensation theory

Dropwise Evaporative Cooling of Heated Surfaces with Various Wettability Characteristics Obtained by Nanostructure Modifications

Numerical Investigation of Heat Transfer and Development in Spherical Condensation Droplets

Development of an Improved Mass Transfer Model for Condensation with Dynamic Feedback Regulation

Heat Transfer Model Based on Diffusion Layer Theory for Dropwise Condensation with High Non-Condensable Gas

The enhancement effects of internal convection on the heat transport of condensing droplets out of pure steam and moist air

Progress in implementation of dropwise condensation

A semi-empirical model for condensation heat transfer coefficient of mixed ethanol-water vapors