Rational design of porous carbon allotropes as anchoring materials for lithium sulfur batteries

Tongtong Li,Cheng He,Wenxue Zhang

DOI: https://doi.org/10.1016/j.jechem.2020.04.042

IF: 13.1

2021-01-01

Journal of Energy Chemistry

Abstract:A new design principle of carbon materials to hinder the shuttle effect of lithium sulfur batteries.

What problem does this paper attempt to address?

Design Principles for Heteroatom-Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium-Sulfur Batteries

Ting-Zheng Hou,Xiang Chen,Hong-Jie Peng,Jia-Qi Huang,Bo-Quan Li,Qiang Zhang,Bo Li

DOI: https://doi.org/10.1002/smll.201600809

IF: 13.3

2016-01-01

Small

Abstract:Lithium-sulfur (Li-S) batteries have been intensively concerned to fulfill the urgent demands of high capacity energy storage. One of the major unsolved issues is the complex diffusion of lithium polysulfide intermediates, which in combination with the subsequent paradox reactions is known as the shuttle effect. Nanocarbon with homogeneous nonpolar surface served as scaffolding materials in sulfur cathode basically cannot afford a sufficient binding and confining effect to maintain lithium polysulfides within the cathode. Herein, a systematical density functional theory calculation of various heteroatoms-doped nanocarbon materials is conducted to elaborate the mechanism and guide the future screening and rational design of Li-S cathode for better performance. It is proved that the chemical modification using N or O dopant significantly enhances the interaction between the carbon hosts and the polysulfide guests via dipole-dipole electrostatic interaction and thereby effectively prevents shuttle of polysulfides, allowing high capacity and high coulombic efficiency. By contrast, the introduction of B, F, S, P, and Cl monodopants into carbon matrix is unsatisfactory. To achieve the strong-couple effect toward Li2 Sx , the principles for rational design of doped carbon scaffolds in Li-S batteries to achieve a strong electrostatic dipole-dipole interaction are proposed. An implicit volcano plot is obtained to describe the dependence of binding energies on electronegativity of dopants. Moreover, the codoping strategy is predicted to achieve even stronger interfacial interaction to trap lithium polysulfides.
Radially Inwardly Aligned Hierarchical Porous Carbon for Ultra‐Long‐Life Lithium–Sulfur Batteries

Zhisheng Yu,Menglan Liu,Daying Guo,Jiahui Wang,Xing Chen,Jun Li,Huile Jin,Zhi Yang,Xi'an Chen,Shun Wang

DOI: https://doi.org/10.1002/anie.201914972

2020-01-01

Angewandte Chemie

Abstract:AbstractRational design of hollow micro‐ and/or nano‐structured cathodes as sulfur hosts has potential for high‐performance lithium‐sulfur batteries. However, their further commercial application is hindered because infusing sulfur into hollow hosts is hard to control and the interactions between high loading sulfur and electrolyte are poor. Herein, we designed hierarchical porous hollow carbon nanospheres with radially inwardly aligned supporting ribs to mitigate these problems. Such a structure could aid the sulfur infusion and maximize sulfur utilization owing to the well‐ordered pore channels. This highly organized internal carbon skeleton can also enhance the electronic conductivity. The hollow carbon nanospheres with further nitrogen‐doping as the sulfur host material exhibit good capacity and excellent cycling performance (0.044 % capacity degradation per each cycle for 1000 cycles).
Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

Ruirui Wang,Renbing Wu,Chaofan Ding,Ziliang Chen,Hongbin Xu,Yongfeng Liu,Jichao Zhang,Yuan Ha,Ben Fei,Hongge Pan

DOI: https://doi.org/10.1007/s40820-021-00676-6

2021-01-01

Abstract:Abstract The practical application of lithium–sulfur batteries is severely hampered by the poor conductivity, polysulfide shuttle effect and sluggish reaction kinetics of sulfur cathodes. Herein, a hierarchically porous three-dimension (3D) carbon architecture assembled by cross-linked carbon leaves with implanted atomic Co–N 4 has been delicately developed as an advanced sulfur host through a SiO 2 -mediated zeolitic imidazolate framework-L (ZIF-L) strategy. The unique 3D architectures not only provide a highly conductive network for fast electron transfer and buffer the volume change upon lithiation–delithiation process but also endow rich interface with full exposure of Co–N 4 active sites to boost the lithium polysulfides adsorption and conversion. Owing to the accelerated kinetics and suppressed shuttle effect, the as-prepared sulfur cathode exhibits a superior electrochemical performance with a high reversible specific capacity of 695 mAh g −1 at 5 C and a low capacity fading rate of 0.053% per cycle over 500 cycles at 1 C. This work may provide a promising solution for the design of an advanced sulfur-based cathode toward high-performance Li–S batteries.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Design and synthesis of core–shell porous carbon derived from porous polymer as sulfur immobilizers for high-performance lithium–sulfur batteries

Yan Dong,Saikat Das,Lili Ye,Chen Wang,Teng Ben

DOI: https://doi.org/10.1007/s10853-022-06946-x

IF: 4.5

2022-02-01

Journal of Materials Science

Abstract:Lithium–sulfur (Li–S) batteries have been receiving utmost interest in virtue of their high theoretical capacity, but the undesirable cycling performance caused by soluble polysulfide shuttling between anode and cathode has hindered its practical applications. This study represents the first report on microporous carbon “shell” derived from carbonization of porous polymer to encapsulate ordered mesoporous carbon “core” functioning as sulfur immobilizers for Li–S batteries. The dual-pore carbon matrix combines the excellent confinement ability of micropores (0.5 nm) and large pore volume (1.432 cm3 g−1) to improve sulfur loading capacity (71.3 wt%), thereby maintaining a capacity of 535 mAh g−1 after 100 cycles and a low fading rate of 0.30% per cycle. The merits of our exclusive core–shell architecture are established through comparative electrochemical performance analyses of individual mesoporous carbon and microporous carbon composites. Our experimental results bring out the excellent electrochemical performance of porous carbon composites, benefitting from its outstanding sulfur loading mass improving its overall capacity and its confinement capacity in the micropores alleviating polysulfide dissolution.Graphical abstract

materials science, multidisciplinary
Rational Designs and Engineering of Hollow Micro-/Nanostructures As Sulfur Hosts for Advanced Lithium–sulfur Batteries

Zhen Li,Hao Bin Wu,Xiong Wen (David) Lou

DOI: https://doi.org/10.1039/c6ee02364a

2016-01-01

Abstract:Rationally designed hollow nanostructures are attractive host materials for the sulfur cathode in lithium–sulfur batteries.
Integrated interconnected porous and lamellar structures realized fast ion/electron conductivity in high-performance lithium-sulfur batteries

Ya Song,Mingxia Zhou,Zhu Chen,Huali Nie,Jiao-Jing Shao,Guangmin Zhou

DOI: https://doi.org/10.1016/j.cclet.2023.109200

IF: 9.1

2023-10-19

Chinese Chemical Letters

Abstract:The practical application of high-energy-density lithium-sulfur (Li-S) batteries have been highly praised for energy storage devices, while are largely hindered by the "shuttling effect". Herein, core-shell carbon spheres composed of interlinked porous core and lamellar shell were designed to restrain the polysulfide shuttling. The microporous structure with pore size of around 1 nm effectively trap lithium polysulfides. Furthermore, the interconnected porous core shortens the ion transfer distance and the lamellar carbon shell endows the carbon spheres with fast electron conduction, finally facilitating polysulfide conversion kinetics. Therefore, the Li-S batteries with the carbon spheres as the interlayer show high discharge specific capacity of 1002 mAh/g at 2 C with 574 mAh/g remaining after 600 cycles, and high areal capacity of 5.48 mAh/cm 2 with sulfur loading of 4.67 mg/cm 2 at 0.1 C. The corresponding pouch cells also exhibit stable cycling stability with an initial discharge specific capacity of 1082 mAh/g at 0.1 C.

chemistry, multidisciplinary
Design Principles of Single Atoms on Carbons for Lithium–Sulfur Batteries

Lingzhe Fang,Zhange Feng,Lei Cheng,Randall E. Winans,Tao Li

DOI: https://doi.org/10.1002/smtd.202000315

IF: 12.4

2020-01-01

Small Methods

Abstract:The study of lithium-sulfur (Li-S) batteries has generated various rationally designed cathodes and modified separators. However, the shuttle of soluble lithium polysulfides (LiPSs) and the sluggish kinetics of transformation of LiPSs to Li2S2/Li2S still hinder the achievement of long-life cycling and high-rate of Li-S batteries. Even though several kinds of nanocatalysts have been studied, the catalytic effects for Li-S batteries are not ideal. Single atoms (SAs) with high surface free energy are found to serve as both anchoring and electrocatalytic centers for LiPSs. Atomically dispersed metal catalysts on carbon provide conductive and flexible hosts for dielectric sulfur. Moreover, SAs as the uniform lithiophilic sites can reduce the nucleation overpotential and ensure uniform plating of Li. In this review, the latest strategies for preparation of SAs supported on carbons are provided for the application of Li-S batteries, including cathodes, modified separators, and Li metal anodes. In addition, it also discusses how SAs with high catalytic activity can help build better Li-S batteries and the design principles for SAs. Finally, the future directions of SAs in energy storage applications are proposed.
Enabling High-Areal-Capacity Lithium-Sulfur Batteries: Designing Anisotropic and Low-Tortuosity Porous Architectures

Yiju Li,Kun ''Kelvin'' Fu,Chaoji Chen,Wei Luo,Tingting Gao,Shaomao Xu,Jiaqi Dai,Glenn Pastel,Yanbin Wang,Boyang Liu,Jianwei Song,Yanan Chen,Chunpeng Yang,Liangbing Hu

DOI: https://doi.org/10.1021/acsnano.7b01172

IF: 17.1

2017-01-01

ACS Nano

Abstract:Lithium-sulfur (Li-S) batteries have attracted much attention due to their high theoretical energy density in comparison to conventional state-of-the-art lithium-ion batteries. However, low sulfur mass loading in the cathode results in low areal capacity and impedes the practical use of Li-S cells. Inspired by wood, a cathode architecture with natural, three-dimensionally (3D) aligned microchannels filled with reduced graphene oxide (RGO) were developed as an ideal structure for high sulfur mass loading. Compared with other carbon materials, the 3D porous carbon matrix has several advantages including low tortuosity, high electrical conductivity, and good structural stability, which make it an excellent 3D lightweight current collector. The Li-S battery assembled with the wood-based sulfur electrode can deliver a high areal capacity of 15.2 mAh cm(-2) with a sulfur mass loading of 21.3 mg cm(-2). This work provides a facile but effective strategy to develop 3D porous electrodes for Li-S batteries, which can also be applied to other cathode materials to achieve a high areal capacity with uncompromised rate and cycling performance.
Engineering of Hollow Core–Shell Interlinked Carbon Spheres for Highly Stable Lithium–Sulfur Batteries

Qiang Sun,Bin He,Xiang-Qian Zhang,An-Hui Lu

DOI: https://doi.org/10.1021/acsnano.5b03488

IF: 17.1

2015-07-21

ACS Nano

Abstract:We report engineered hollow core-shell interlinked carbon spheres that consist of a mesoporous shell, a hollow void, and an anchored carbon core and are expected to be ideal sulfur hosts for overcoming the shortage of Li-S batteries. The hollow core-shell interlinked carbon spheres were obtained through solution synthesis of polymer spheres followed by a pyrolysis process that occurred in the hermetical silica shell. During the pyrolysis, the polymer sphere was transformed into the carbon core and the carbonaceous volatiles were self-deposited on the silica shell due to the blocking effect of the hermetical silica shell. The gravitational force and the natural driving force of lowering the surface energy tend to interlink the carbon core and carbon/silica shell, resulting in a core-shell interlinked structure. After the SiO2 shell was etched, the mesoporous carbon shell was generated. When used as the sulfur host for Li-S batteries, such a hierarchical structure provides access to Li(+) ingress/egress for reactivity with the sulfur and, meanwhile, can overcome the limitations of low sulfur loading and a severe shuttle effect in solid carbon-supported sulfur cathodes. Transmission electron microscopy and scanning transmission electron microscopy images provide visible evidence that sulfur is well-encapsulated in the hollow void. Importantly, such anchored-core carbon nanostructures can simultaneously serve as a physical buffer and an electronically connecting matrix, which helps to realize the full potential of the active materials. Based on the many merits, carbon-sulfur cathodes show a high utilization of sulfur with a sulfur loading of 70 wt % and exhibit excellent cycling stability (i.e., 960 mA h g(-1) after 200 cycles at a current density of 0.5 C).

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
New Insights into the Anchoring Mechanism of Polysulfides inside Nanoporous Covalent Organic Frameworks for Lithium-Sulfur Batteries

Xuedan Song,Mengru Zhang,Man Yao,Ce Hao,Jieshan Qiu

DOI: https://doi.org/10.1021/acsami.8b16172

2018-12-19

Abstract:The application prospects of lithium-sulfur (Li-S) batteries are constrained by many challenges, especially the shuttle effect of lithium polysulfides (Li2S x). Recently, microporous covalent organic framework (COF) materials have been used to anchor electrodes in Li-S batteries, because of their preferable characteristics, such as self-design ability, suitable pore size, and various active groups. To identify the ideal anchoring materials that can effectively restrain the shuttle of Li2S x species, the anchoring mechanism between COF materials and Li2S x species should be investigated in depth. Therefore, we systematically investigated the anchoring mechanism between specific COF nanomaterials (consisting of boron and oxygen atoms and benzene group) and Li2S x ( x = 1, 2, 4, 6, or 8) species on the surface and inside the pore using density functional theory methods with van der Waals interactions. The detailed analysis of the adsorption energy, difference charge density, charge transfer, and atomic density of states can be used to determine that the COF nanomaterials, with the structure of boroxine connecting to benzene groups and boroxine groups not constructed at the corner of the structure, can effectively anchor the Li2S x series. Accordingly, this study provides the theoretical basis for the molecular-scale design of ideal anchoring materials, which can be useful to improve the performance of the Li-S batteries.
Rutile Titanium Dioxide and Graphene-Like OCN Tailoring Free-Standing Carbon Fiber Aerogel As Polysulfide Anchoring Materials for Lithium–sulfur Batteries

D. Yang,T. Wu,H. Gao,M. Jia,L. Ji,J. Wang,Q. Zhuang,B. Yu,L. Lu,Y. Zhang,J. Liu

DOI: https://doi.org/10.1016/j.mtsust.2023.100573

IF: 7.244

2023-01-01

Materials Today Sustainability

Abstract:The rational design of a host material with strong adsorption and excellent electrical conductivity function for sulfur cathode to suppress the shuttle effects of soluble lithium polysulfide (LiPS) is crucial to advance the lithium-sulfur (Li-S) battery for future commercial applications. In this work, we designed a three-dimensional (3D) carbon fiber aerogel with graphene-like oxygenated carbon nitrogen (OCN) and TiO2 (OCNF-TiO2) as a sulfur anchoring material for Li-S battery and explored the regulating effects of TiO2 on the electrochemical performances. The OCNF-TiO2/S cathode presents an initial discharge-specific capacity of 1039 mAh/g (0.1C), a rate capacity of 690 mAh/g at 1C, a cycling performance with a capacitance retention of 72.1%, and the decay of 0.13% per cycle after 200 cycles at 0.5C.
Cobalt-embedded hierarchically-porous hollow carbon microspheres as multifunctional confined reactors for high-loading Li-S batteries

Li Su,Jinqiang Zhang,Yi Chen,Wu Yang,Jing Wang,Zhipeng Ma,Guangjie Shao,Guoxiu Wang

DOI: https://doi.org/10.1016/j.nanoen.2021.105981

IF: 17.6

2021-07-01

Nano Energy

Abstract:The shuttle effect of dissolved polysulfides migrating to and depositing on anodes often leads to low round-trip efficiency and short cycle life for lithium-sulfur (Li-S) batteries. Herein, we report the rational design of cobalt-embedded nitrogen-doped hollow carbon microspheres () as a multifunctional sulfur host for Li-S batteries. The hollow carbon microspheres exhibit large central cavities wrapped by a hierarchically porous shell, showing a large surface area of 1954 m2 g-1. Furthermore, the carbon shells display a unique porous architecture, in which small pores are scattered on the outside and large pores are inside, thereby functioning as a selection barrier to confine polysulfides and diffuse Li+ simultaneously. Moreover, the highly dispersed cobalt nanoparticles in the porous shell activate the surrounding N-doped carbon layer, which not only promote chemical adsorption of polysulfides but also catalyze polysulfide conversion. This facilitation effect has been confirmed by Bader charge and density function theory (DFT) calculations. When applied in Li-S batteries, the sulfur-impregnated cathode material exhibits excellent electrochemical performances, especially with a high sulfur content of 90.5 wt% and a high areal sulfur loading of 5.1 mg cm-2.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Carbon Foam Fibers with a Concentric Tube‐Core/Three‐Dimensional Nanosheet‐Sheath Structure for High‐Performance Lithium‐Sulfur Batteries

Gang Li,Shiwei Xu,Bin Li,Tong Xia,Jian Yu,Feng Shao,Hong Li,Zhi Yang,Yanjie Su,Yafei Zhang,Jie Ma,Nantao Hu

DOI: https://doi.org/10.1002/celc.202001555

IF: 4

2021-02-05

ChemElectroChem

Abstract:Due to the superior electrical conductivity and large specific surface areas, the carbon nanomaterials are widely applied as hosts for Lithium sulfur (Li‐S) batteries, while it is challenging to design and prepare hierarchical porous carbon nanomaterials with unique structure, which has excellent performances for Li‐S batteries. Herein, the hierarchical carbon foam fiber (HPCF) with concentric‐tube‐core/three‐dimensional nanosheet‐sheath structure has been rationally designed and fabricated via solution‐combustion and etching methods for Li‐S batteries. The as‐prepared HPCF, with a sulfur loading of 72wt.%, possesses a high initial discharge capacity of 1097.3 mAh g‐1 and 68.7% retention after 500 cycles at 0.2 C. The as‐designed unique structure can efficiently improve conductivity, suppress the dissolution of polysulfides and provide quick electron/ion transfer channels, which is beneficial for designing advanced sulfur cathodes for high‐performance Li‐S batteries.

electrochemistry
Rational porous design for carbon nanotubes derived from tubular polypyrrole as sulfur host for lithium-sulfur batteries

Wenli Wei,Peng Liu

DOI: https://doi.org/10.1016/j.micromeso.2020.110705

IF: 5.876

2021-02-01

Microporous and Mesoporous Materials

Abstract:Heteroatom doped porous carbon nanotubes (CNTs) have been widely used as sulfur host and stable polysulfide reservoir in the Li–S batteries. In the present work, the effect of the pore size in the porous CNTs on the battery performance of the CNTs-based sulfur cathodes was investigated by comparing the electrochemical performance of the N, O-doped porous CNTs, which were designed by the carbonization of the PPy nanotubes as precursor with different amounts of KOH as activating agent. The results showed that sulfur could completely fill the mesopores and hollow cavity of the mesoporous carbon nanotubes (PNCT-2) prepared with severe KOH activation, with theoretical calculated sulfur content. In comparison with the S-PCNT-1 cathode with sulfur coated onto the outer surface of the microporous carbon nanotubes (PNCT-1), the S-PCNT-2 cathode possessed higher specific capacity and rate capacity, as well as better cyclic life. Such features are ascribed to the large specific surface area and the appropriate pore size of the PCNT-2, which provides efficient diffusion path for the sulfur and electrolyte as well as polysulfide trap suppressing the "shuttle effect" efficiently.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
Assembling Carbon Pores into Carbon Sheets: Rational Design of Three-Dimensional Carbon Networks for a Lithium Sulfur Battery

Shuo Feng,Junhua Song,Chengzhou Zhu,Qurong Shi,Dong Liu,Jincheng Li,Dan Du,Qiang Zhang,Yuehe Lin

DOI: https://doi.org/10.1021/acsami.8b17549

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:The conversion reaction-based lithium-sulfur battery features an attractive energy density of 2600 W h/kg. Nevertheless, the unsatisfied performance in terms of poor discharge capacity and cycling stability still hinders its practical applications. Recently, porous carbon materials have been widely reported as promising sulfur reservoirs to promote the sluggish reaction kinetics of sulfur conversion, tolerate volume expansion of sulfur, and suppress polysulfide shuttling. However, porous carbon with a simply designed nanostructure is hard to satisfy all of these aspects simultaneously. Herein, we have applied a dual-template strategy that assembles carbon pores into carbon sheets to prepare three-dimensional (3D) nitrogen-doped porous carbon nanosheets (N-PCSs) as the multifunctional sulfur host for the Li-S battery. By arranging carbon pores within an interconnected 3D architecture, the porous carbon sheets enable rapid electron/ion transfer. Moreover, the micro/mesopores and nitrogen dopant in N-PCS provide both physical and chemical restrictions to polysulfide species. With these advances, the N-PCS/S cathode delivers a large initial discharge capacity of 1360 mA h/g at 0.1 C. When performed at 0.5 C for 1000 cycles, the cathode can still remain ∼50% of its capacity with a low decay rate of 0.05% per cycle, showing the important role of the 3D carbon material in the Li-S battery.
Directing electrochemical reaction mechanism via interfacial control for better sulfur cathode

Lei Hu,Haifeng Xue,Lingli Liu,Sheng Liang,Tao Ding,Ningning Zhou,Lili Wang,Chonghai Deng,Yongsheng Han

DOI: https://doi.org/10.1016/j.apsusc.2021.152353

IF: 6.7

2022-04-01

Applied Surface Science

Abstract:The “shuttle effect” in ether electrolyte or nucleophilic reaction in carbonate electrolyte are major obstacles to developing of lithium-sulfur (Li–S) batteries. Superficial sulfur on the outside of microporous carbon host can occur“shuttle effect” in ether electrolyte or nucleophilic reaction in carbonate electrolyte, which may affect the electrochemical reaction mechanism for lithium-sulfur batteries and need to be further clarified. Herein, we rationally designed microporous carbon and non-microporous carbon as the sulfur hosts, and manipulated the distribution of sulfur via interfacial control in cathode material, exhibiting diverse electrochemical behavior in carbonate electrolyte and ether electrolyte. The surface composition of the electrode was confirmed by ex-situ XPS and verified by in-situ XRD, which contributes to demonstrating the definite reaction mechanisms of lithium-sulfur batteries in the different electrolytes. The results show only the sulfur confined in microporous structure is active via “solid–solid” pathway, and the presence of sulfur on the outer surface of the cathode electrode has the negative effect on electrochemical performance in both electrolytes, which should be avoided in the fabrication of carbon/sulfur composites. Based on microporous carbon/sulfur composites, the lithiated Ge-S full cell was proposed and exhibited superior cycling performance and high Coulombic Efficiency.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Rational Design of the Lotus‐Like N‐Co 2 VO 4 ‐Co Heterostructures with Well‐Defined Interfaces in Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries

Wei Zhou,Dengke Zhao,Qikai Wu,Jiacheng Dan,Xiaojing Zhu,Wen Lei,Li‐Jun Ma,Ligui Li

DOI: https://doi.org/10.1002/smll.202104109

IF: 13.3

2021-10-27

Small

Abstract:The shuttle effect caused by soluble lithium polysulfides (LiPSs) and intrinsic slow electrochemical transformation from LiPSs to Li2 S/Li2 S2 will induce undesirable cycling performance, which is the primary obstruct limiting the practical applications of lithium-sulfur (Li-S) batteries. Here a convenient method is designed to fabricate the 2D louts-like N-Co2 VO4 -Co heterostructures with well-abundant interfaces and oxygen vacancies (Vo ), endowing the materials with both "sulfiphilic" and "lithiophilic" features. When employed as the modification layer coated on commercial Celgard 2400 separator, the as-prepared N-Co2 VO4 -Co/PP with synergistic adsorption-electrocatalysis effects achieves desirable sulfur electrochemistry, thus showing a high initial discharge capacity of 1466.4 mAh g-1 at 0.1 C and stable cycle life with a fade rate of 0.03% per cycle over 1000 cycle at 3.0 C. Moreover, a superior areal capacity of 12.84 mAh cm-2 is preserved under high sulfur loading of 14.3 mg cm-2 .

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Amylose-Derived Macrohollow Core and Microporous Shell Carbon Spheres As Sulfur Host for Superior Lithium-Sulfur Battery Cathodes.

Xiang Li,Xuanbing Cheng,Mingxia Gao,Dawei Ren,Yongfeng Liu,Zhengxiao Guo,Congxiao Shang,Lixian Sun,Hongge Pan

DOI: https://doi.org/10.1021/acsami.7b00672

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Porous carbon can be tailored to great effect for electrochemical energy storage. In this study, we propose a novel structured spherical carbon with a macrohollow core and a microporous shell derived from a sustainable biomass, amylose, by a multistep pyrolysis route without chemical etching. This hierarchically porous carbon shows a particle distribution of 2-10 μm and a surface area of 672 m2 g-1. The structure is an effective host of sulfur for lithium-sulfur battery cathodes, which reduces the dissolution of polysulfides in the electrolyte and offers high electrical conductivity during discharge/charge cycling. The hierarchically porous carbon can hold 48 wt % sulfur in its porous structure. The S@C hybrid shows an initial capacity of 1490 mAh g-1 and retains a capacity of 798 mAh g-1 after 200 cycles at a discharge/charge rate of 0.1 C. A capacity of 487 mAh g-1 is obtained at a rate of 3 C. Both a one-step pyrolysis and a chemical-reagent-assisted pyrolysis are also assessed to obtain porous carbon from amylose, but the obtained carbon shows structures inferior for sulfur cathodes. The multistep pyrolysis and the resulting hierarchically porous carbon offer an effective approach to the engineering of biomass for energy storage. The micrometer-sized spherical S@C hybrid with different sizes is also favorable for high-tap density and hence the volumetric density of the batteries, opening up a wide scope for practical applications.
A rational design of the coupling mechanism of physical adsorption and chemical charge effect for high-performance lithium–sulfur batteries

Guilin Feng,Xiaohong Liu,Yasai Wang,Zhenguo Wu,Chen Wu,Rong Li,Yanxiao Chen,Xiaodong Guo,Benhe Zhong,Jianshu Li

DOI: https://doi.org/10.1039/c9ra01730e

IF: 4.036

2019-01-01

RSC Advances

Abstract:Trapping LPSs by the anion electrostatic effect of –SO 3 H and the chemical adsorption of N-doped carbon for enhanced Li–S batteries.

chemistry, multidisciplinary
Rational design of Ni3(HITP)2@GO composite for lithium-sulfur cathode

Tao Zhang,Yangli Wu,Yutao Yin,Huanhuan Chen,Cong Gao,Yawen Xiao,Xinglong Zhang,Jiansheng Wu,Bing Zheng,Sheng Li

DOI: https://doi.org/10.1016/j.apsusc.2021.151479

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:Lithium-sulfur batteries have attracted much attention due to their low cost, environment-friendliness, and high energy density. However, it is hard to get a satisfactory performance due to the low conductivity of sulfur, the volume changes from sulfur to lithium sulfides during the cycling, and the shuttle effect of the intermediate product of polysulfides. Here, we propose a sulfur host material based on the composite of conductive metal–organic frameworks (Ni3(HITP)2) and graphene oxide. This composite material combines the unique pore structure of Ni3(HITP)2 and the improved conductivity. The stacked one-dimensional channels could effectively improve the utilization of S, and the good conductivity could enhance the charge transfer of the electrode. The rich Lewis acid sites of Ni3(HITP)2 could effectively adsorb the polysulfides around the open metal sites that help suppress the shuttle effects. This rational design improves the rate performance and cycle stability of lithium-sulfur batteries.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films

Rational design of porous carbon allotropes as anchoring materials for lithium sulfur batteries

Design Principles for Heteroatom-Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium-Sulfur Batteries

Radially Inwardly Aligned Hierarchical Porous Carbon for Ultra‐Long‐Life Lithium–Sulfur Batteries

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

Design and synthesis of core–shell porous carbon derived from porous polymer as sulfur immobilizers for high-performance lithium–sulfur batteries

Rational Designs and Engineering of Hollow Micro-/Nanostructures As Sulfur Hosts for Advanced Lithium–sulfur Batteries

Integrated interconnected porous and lamellar structures realized fast ion/electron conductivity in high-performance lithium-sulfur batteries

Design Principles of Single Atoms on Carbons for Lithium–Sulfur Batteries

Enabling High-Areal-Capacity Lithium-Sulfur Batteries: Designing Anisotropic and Low-Tortuosity Porous Architectures

Engineering of Hollow Core–Shell Interlinked Carbon Spheres for Highly Stable Lithium–Sulfur Batteries

New Insights into the Anchoring Mechanism of Polysulfides inside Nanoporous Covalent Organic Frameworks for Lithium-Sulfur Batteries

Rutile Titanium Dioxide and Graphene-Like OCN Tailoring Free-Standing Carbon Fiber Aerogel As Polysulfide Anchoring Materials for Lithium–sulfur Batteries

Cobalt-embedded hierarchically-porous hollow carbon microspheres as multifunctional confined reactors for high-loading Li-S batteries

Carbon Foam Fibers with a Concentric Tube‐Core/Three‐Dimensional Nanosheet‐Sheath Structure for High‐Performance Lithium‐Sulfur Batteries

Rational porous design for carbon nanotubes derived from tubular polypyrrole as sulfur host for lithium-sulfur batteries

Assembling Carbon Pores into Carbon Sheets: Rational Design of Three-Dimensional Carbon Networks for a Lithium Sulfur Battery

Directing electrochemical reaction mechanism via interfacial control for better sulfur cathode

Rational Design of the Lotus‐Like N‐Co 2 VO 4 ‐Co Heterostructures with Well‐Defined Interfaces in Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries

Amylose-Derived Macrohollow Core and Microporous Shell Carbon Spheres As Sulfur Host for Superior Lithium-Sulfur Battery Cathodes.

A rational design of the coupling mechanism of physical adsorption and chemical charge effect for high-performance lithium–sulfur batteries

Rational design of Ni3(HITP)2@GO composite for lithium-sulfur cathode