Effect of H2/CO addition on soot formation in ethylene diffusion flame
Yindi Zhang,Yijing Xue,Zichun Xu,Fanjin Zeng,Yue Xin,Qinghai Chen,Shadrack Adjei Takyi
DOI: https://doi.org/10.3389/fenrg.2024.1363363
IF: 3.4
2024-06-08
Frontiers in Energy Research
Abstract:Coupling the San Diego gas phase reaction mechanism and the Moss Brookes soot model using FLUENT14.0 software, the effect of adding H 2 /CO on the fuel side on soot formation in an ethylene/air laminar diffusion flame was studied. A specific analysis was conducted on the effects of H 2 , CO and its chemical effects on flame temperature, soot volume fraction, mole fractions of important intermediate products OH, H, and C 2 H 2 , as well as rate of soot mass nucleation, surface growth, and oxidation. In the numerical calculation, the virtual substances FH 2 and FCO are set to separate the chemical effect of H 2 and CO and to analyze the chemical effect of adding H 2 and CO on soot formation. The results show that the flame temperature increases slightly, and the soot volume fraction decreases monotonically with adding H 2 and CO. The chemical effect of H 2 increases the temperature, the mole fraction of C 2 H 2 and H, the soot nucleation rate, and the surface growth rate, and finally, it promotes soot formation. The chemical effect of CO increases the temperature and H mole fraction, reduces the OH mole fraction, and then increases the soot surface growth rate and reduces the soot oxidation rate. The higher soot nucleation, surface growth rate, and lower oxidation rate jointly promote soot formation.
energy & fuels