Abstract:Highlights • An eco-friendly route was employed to synthesize binary CuO/ZnO nanocomposites. • State-of-the-art analytical techniques were employed to determine the surface morphology, elemental composition, crystal structure, chemical states and important functional groups of the engineered photocomposites. • The optimization of sulfasalazine degradation was successfully investigated by applying a "response surface methodology (RSM)" model. • The optimized reaction values, pH = 4.06, SSZ dose = 47.75 mg/L, CuO/ZnO dose = 44.42 mg, and temperature = 23.60 °C. • The prepared photocomposites presented an exceptional hydrogen production value of 1136 μmolh -1 g -1 . Background Approaches for sustainable, green, and expensive catalyst-free hydrogen production have not been explored extensively. Moreover, during photocatalysis, a lot of material gets wasted due to a lack of proper optimization of the reaction parameters to remove the toxic industrial effluents. Methods Here in this study, we present the green synthesis of CuO/ZnO nanocomposites from the ethanolic crude extract of Oxystelma esculentum . The synthesized photocomposites were systematically characterized by Fourier transform infrared spectroscopy, zeta potential, x-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and x-ray photoelectron spectroscopy. The performed analyses provided useful insights into identifying important functional groups, size, morphology, elemental composition, crystallinity, and defects in the synthesized photocomposites. Significant Findings After characterization, the nanocomposites were evaluated for photocatalytic sulfasalazine (SSZ) degradation and hydrogen production. The response surface methodology (RSM) was employed to optimize SSZ's photocatalytic degradation. The optimized values of reaction parameters for the photocatalytic degradation of SSZ comprise pH = 4.06, SSZ dose = 47.75 mg/L, CuO/ZnO dose = 44.42 mg, and temperature = 23.60 °C. The rates observed in the hydrogen production (1136 μmolh -1 g -1 ) were obtained without costly co-catalyst. The optimized values for hydrogen production include photocatalyst dosage = 50 mg, pH = 7, and time = 5 hours. These features signify the efficient separation of charge carriers between synthesized nanocomposites, resulting in exquisite activities. Graphical abstract Download: Download high-res image (391KB) Download: Download full-size image CuO/ZnO nanocomposites towards Excellent Removal of Sulfasalazine from Wastewater and Pt free Hydrogen Production: Evaluation of Reaction Parameters by Response Surface Methodology.

MFO@NZVI/hydrogel for sulfasalazine degradation: Performance, mechanism and degradation pathway

Construction of Z-scheme Ag/AgVO3/carbon-rich g-C3N4 heterojunction for enhanced photocatalytic degradation of sulfamethiadiazole: DFT calculation and mechanism study

Efficient Degradation of Sulfamethoxazole by Diatomite-Supported Hydroxyl-Modified UIO-66 Photocatalyst after Calcination

Adsorption and Photocatalytic Degradation of Sulfamethoxazole by A Novel Composite Hydrogel with Visible Light Irradiation

Enhancing Fenton-like reaction through a multifunctional molybdenum disulfide film coating on nano zero valent iron surface (MoS 2 @nZVI): Collaboration of radical and non-radical pathways

Solar-driven Pt free hydrogen production and successive degradation of sulfasalazine using CuO/ZnO binary nanocomposites: Reaction kinetics and determination of reaction parameters using response surface methodology

Combined the Photocatalysis and Fenton-like Reaction to Efficiently Remove Sulfadiazine in Water Using g-C3N4/Ag/γ-FeOOH: Insights Into the Degradation Pathway From Density Functional Theory

Multiple strategies enhance visible-light photocatalytic degradation levofloxacin of Fe-doped MOF/AgCl Z-scheme heterojunction composites based on pyrazole carboxylic ligand

Interfacial oxygen vacancy modulated ZIF-8-derived ZnO/CuS for the photocatalytic degradation of antibiotic and organic pollutants: DFT calculation and degradation pathways

Photo-Fenton efficient degradation of organic pollutants over S-scheme ZnO@NH 2 -MIL-88B heterojunction established for electron transfer channel

Oxygen-vacancy-tunable mesocrystalline ZnO twin "cakes" heterostructured with CdS and Cu nanoparticles for efficiently photodegrading sulfamethoxazole

The enhanced mechanism of Fe(III)/H 2 O 2 system by N, S-doped mesoporous nanocarbon for the degradation of sulfamethoxazole

Construction of ZnFe2O4/g-C3N4 nanocomposite catalyst for degradation of organic compound through photodegradation and heterogeneous Fenton oxidation

Direct Z-scheme system of UiO-66 cubes wrapped with Zn0.5Cd0.5S nanoparticles for photocatalytic hydrogen generation synchronized with organic pollutant degradation

Fabrication and enhanced photocatalytic performance of sodium alginate/polyacrylamide hydrogel-supported ZnO VS photocatalysis

High performance of reduced graphene oxide and g-C 3 N 4 co-doped CuFe 2 O 4 for peroxymonosulfate activation under visible light: Degradation process of sulfamethazine via a singlet oxygen dominated pathway

MOF-derived N-doped ZnO carbon skeleton@hierarchical Bi2MoO6 S-scheme heterojunction for photodegradation of SMX: Mechanism, pathways and DFT calculation

Enhanced photocatalytic degradation of sulfamethoxazole by stable hierarchical Fe2O3/Co3O4 heterojunction on nickel foam

Excellent performance of AgVO3@ZIF(Zn, Co) interfacial heterojunction for photodegradation of organic pollutants: Experimental and computational studies

Novel MIL-53(Fe)/ZnO nanocomposite mediated by persulfate in photocatalytic degradation of sulfamethazine under visible light

MoS2/CoFe2O4 heterojunction for boosting photogenerated carrier separation and the dominant role in enhancing peroxymonosulfate activation