Abstract:In order to effectively remedy shallow grooves on asphalt pavements, this study presents an innovative solution, termed Polyamide-based Asphalt Pavement Shallow Groove Rapid Repair Material (PA-SGRRM). This material employs polyamide 6 (PA6) as the matrix resin, in conjunction with polypropylene (PP), ethylene-vinyl acetate copolymer (EVA), and maleic anhydride-grafted polyethylene-octene copolymer (POE-g-MAH). It is manufactured through an extrusion granulation process. At the outset, a molecular dynamics approach was employed to assess the compatibility of the primary constituents and the adhesion between the matrix resin and asphalt, confirming the rationale behind the material selection. Subsequently, the orthogonal experimental design method was utilized to investigate the influence of design parameters (POE-g-MAH content, PP content, and EVA content) on the flexural strength, tensile strength, low-temperature toughness, and melt flow rate of PA-SGRRM. Following this, we prepared samples with the optimal proportions of EVA and POE-g-MAH and conducted a separate analysis to evaluate the impact of PP on the saturated moisture content of PA-SGRRM. Finally, we employed Scanning electron microscopy (SEM) to observe the microstructures of the low-temperature fracture surface and ambient temperature tensile fracture surface of the PA-SGRRM and employed Fourier transform infrared spectroscopy (FTIR) to deduce the primary chemical reactions occurring within the PA-SGRRM. The results demonstrated that POE-g-MAH played a crucial role in enhancing the compatibility of the simulated hybrid system consisting of PP and PA6. Additionally, it was observed that adhesion between PA6 and asphalt existed, with a gradual decrease as temperature rose. The content of POE-g-MAH and PP were the two primary parameters influencing the performance of PA-SGRRM. POE-g-MAH exerted a significant adverse impact on the flexural strength, tensile strength, and melt flow rate of PA-SGRRM, while substantially improving its lowtemperature toughness. The PP positively reduced the water absorption characteristics of PA-SGRRM. Based on the experimental results, the optimal combination of design parameters for PA-SGRRM is recommended.

Multi-objective design optimization of composite polymerized asphalt emulsions for cold patching of pavement potholes

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Multiscale Performance of Composite Modified Cold Patch Asphalt Mixture for Pothole Repair

Advanced cold patching materials (CPMs) for asphalt pavement pothole rehabilitation: State of the art

Analysis of viscoelastic rheological properties and storage stability of solvent cold patching asphalt

Multi-objective optimization of cold mix materials based on response surface methodology

Optimization of Composite-Modified Asphalt Ratio and Performance Evaluation of Rich Bottom Layer Mixes

PREPARATION AND PERFORMANCE OF CEMENTING MATERIALS FOR RAPID MAINTENANCE OF PAVEMENT POTHOLES

Optimization Design of Asphalt Mixture Composite Reinforced with Calcium Sulfate Anhydrous Whisker and Polyester Fiber Based on Response Surface Methodology

Evaluating the effects of different modifiers on the water stability and storability of cold-patching asphalt mixture

Performance Optimization of Composite Modified Asphalt Sealant Based on Rheological Behavior

Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

Mechanistic-empirical evaluation of specific polymer-modified asphalt binders effect on the rheological performance

Preparation and Performance Improvement Mechanism Investigation of High-Performance Cementitious Grout Material for Semi-Flexible Pavement

Factors Influencing the Interfacial Bonding Characteristics Between Cold Patching Asphalt Mixture and the Old Pavement

Performance Optimization Method of Composite Modified Asphalt Sealant

Investigation of the Water Damage Resistance and Storability of a SEBS-Modified Cold-Patching Asphalt Mixture

Preparation and Performance Analysis of Polyamide-Based Rapid Repair Material for Asphalt Pavement Shallow Groove

Experimental analysis of semi-flexible pavement by using an appropriate cement asphalt emulsion paste

Quantitative assessment and mechanism analysis of modification approaches for cold recycled mixtures with asphalt emulsion