Abstract:<p>A new dynamic model of shrouded blades with elastic support and variable cross-section is derived based on the Timoshenko beam theory, in which factors to be considered include centrifugal stiffening, spin softening, Coriolis force, blade stagger angle, and twist angle. The proposed model (PM) is verified by comparing the dynamic frequency results of the finite element model (FEM) and the PM. An impact-friction model of shrouded blades is established which can take into account the inertia effects of two passive blades. By comparing the vibration response of the two models (PM and FEM), the established impact-friction model is verified. Finally, the influences of normal contact stiffness, blade root support stiffness, and shroud position on the vibration response of the system are analyzed. Meanwhile, bifurcation diagrams, time-domain waveforms, phase diagrams, Poincaré maps, and frequency spectrum are utilized to analyze the nonlinear vibration characteristics of shrouded blades. The results show that the impact and friction between adjacent shrouds will cause the complex nonlinear vibration of the blades. Under small initial gaps, hard nonlinear phenomena can be observed in the vibration response of the shrouded blade. While under small initial preloads, it shows an obvious soft nonlinear phenomenon. Furthermore, with the increase of normal contact stiffness and blade root support stiffness, the resonance peak of the blade-tip flexural displacement decreases. When the shroud is closer to the blade-tip of the blade, the vibration reduction effect of the shrouded blade is better. The active blade experiences the chaos, period-one motion due to the nonlinear behavior of the impact-friction coupling at the adjacent shroud contact interfaces.</p>

Vibration Characteristics Analysis of Integrally Shrouded Turbine Blade Considering Separation and Reattachment

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Dynamic response analysis of shrouded blades under impact-friction considering the influence of passive blade vibration

Effect of asymmetric shroud gap and shroud friction coefficient on vibration response of shrouded blades

Analysis of Nonlinear Vibration Characteristics of Two-dimensional Friction Motion with Variable Load

Impact Vibration Characteristics of a Shrouded Blade with Asymmetric Gaps under Wake Flow Excitations

Nonlinear Dynamics and Combination Resonance of a Flexible Turbine Blade with Contact and Friction of Shrouds

Dynamic Response Analysis of Blades with Damping Structures of Shroud and Snubber

Study On The Nonlinear Model Of Continuous Rotor And Its Solution

Nonlinear Flap-Wise Vibration Characteristics of Wind Turbine Blades Based on Multi-Scale Analysis Method

Effect of the Blade Vibration on the Dynamical Behaviors of a Rotor-Bearing System

Research on the Turbine Blade Vibration Base on the Immersed Boundary Method

Coupled Bending and Torsional Vibration of a Rotor System with Nonlinear Friction

Vibration characteristics on a wind turbine rotor using modal and harmonic analysis of FEM

Nonlinear vibration and dynamic stability analysis of rotor-blade system with nonlinear supports

Preliminary Study on the Mechanism of Vibration Induced by the Unsteady Aerodynamic Forces

Nonlinear Vibration Characteristics of a Flexible Blade with Friction Damping Due to Tip-Rub

Study Of Snubbing Mechanism Using Finite Element Method

Nonlinear Dynamical Behaviors of a Blade-Shaft-Bearing System

Free vibration analysis of a rotating varying-thickness-twisted blade with arbitrary boundary conditions