Abstract:Tungsten oxide (WO3) electrochromic devices have attracted a lot of interest in the energy conservation field and have shown a preliminary application potential in the market. However, it is difficult to quantitatively direct experiments with the existing electrochromic theoretical models, which can restrict the further development of electrochromism. Here, an electrochromic physical simulation model of WO3 films was built to solve the above problem. Experimentally, the actual electrochromic kinetics of WO3 in the LiClO4/propylene carbonate electrolyte was determined as a continuous electron-transfer process by cyclic voltammetry measurement and X-ray photoelectron spectroscopy analysis. Theoretically, the continuous electron-transfer process, Li+-ion diffusion process, and the transmittance change process were described by a modified Butler–Volmer equation, Fick's law, and charge versus coloration efficiency/bleaching efficiency coupling equation, respectively. The comparisons between theoretical and experimental data were conducted to verify this model. The shape of the simulated current curves was basically consistent with that of experiments. Besides, the difference of transmittance between the simulation and experiments was less than 8%. The difference between theory and experiment was attributed to the influence of the electric double layer and the actual reaction interface. The success of the simulation was attributed to the accurate description of the electrochromic process by continuous electron-transfer kinetics. This model can be applied in the research of electrochromic mechanisms, experimental result prediction, and novel device development due to its clear physical nature.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c19993?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c19993</a>.CV curves with fast scan rates, Li+-ion transport model, list of parameters and variables, AFM images of the ITO substrate and WO3 film, XPS spectral analysis of the annealed WO3 film, XRD pattern analysis of the WO3 film, FT-IR spectral analysis, transmittance spectra and optical band gap of the WO3 film, extraction of simulated parameters using PITT and the Tafel equation, electrochromic transmittance spectra and digital photos of the WO3 film, and schematic diagram of the geometric module (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c19993/suppl_file/am0c19993_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Full Spectrum Electrochromic WO3 Mechanism and Optical Modulation via Ex Situ Spectroscopic Ellipsometry: Effect of Li+ Surface Permeation

A study of Electrochromic thin films and Devices by Photothermal Deflection Technique

Optical Characterization of the Coloration Process in Electrochromic Amorphous and Crystalline Wo3 Films by Spectroscopic Ellipsometry

Transmittance Correlated Real-Time Resistivity Modulation and Insulator-Metal Transition of Electrochromic WO3 Thin Films

Dual-Band Electrochromism in Hydrous Tungsten Oxide

Physical Simulation Model of WO 3 Electrochromic Films Based on Continuous Electron-Transfer Kinetics and Experimental Verification

Optical Characterization and Electrochemical Behavior of Electrochromic Windows Using Magnetron Sputter Deposition Tungsten Oxide and (1-X) WO 3 Xtio 2 Thin Films

Insight into the structure–activity relationship in electrochromism of WO3 with rational internal cavities for broadband tunable smart windows

Dynamic Process of Ions Transport and Cyclic Stability of WO3 Electrochromic Film

An all-solid-state electrochromic device based on NiO/WO3 complementary structure and solid hybrid polyelectrolyte

Physical Simulation Model of WO3 Electrochromic Films Based on Continuous Electron-Transfer Kinetics and Experimental Verification.

In Situ Raman Observation of Dynamically Structural Transformation Induced by Electrochemical Lithium Intercalation and Deintercalation from Multi‐Electrochromic V2O5 Thin Films

Understand the Degradation Mechanism of Electrochromic WO3 Films by Double‐step Chronoamperometry and Chronocoulometry Techniques Combined with in Situ Spectroelectrochemical Study

Lithiation of WO3 films by evaporation method for all-solid-state electrochromic devices

Preparation of WO 3 Films with Controllable Crystallinity for Improved Near-Infrared Electrochromic Performances

Electrochromic performance of WO3 films: optimization by crystal network topology modification

High Performance in Electrochromic Amorphous WOx Film with Long-Term Stability and Tunable Switching Times Via Al/Li-ions Intercalation/deintercalation

Enhanced electrochromism in short wavelengths for NiO:(Li, Mg) films in full inorganic device ITO/NiO:(Li, Mg)/Ta 2 O 5 /WO 3 /ITO

Morphology-Dependent Near-Infrared Electrochromic Properties of Tungsten Oxide

Boosting the Zn2+-based Electrochromic Properties of Tungsten Oxide Through Morphology Control

Effect of In Situ Heating on the Growth and Electrochromic Properties of Tungsten Trioxide Thin Films