Abstract:Catalysis is the key to improve efficiency of materials transformation, which is crucial for sustainable development. For example, photocatalytic water splitting can use clean solar energy to produce hydrogen from water, which is clean and renewable. Unfortunately, efficiencies of photocatalysts are typically low. One of main bottlenecks lies in substantial charge recombination. Consequently, much effort has been made to promote effective charge separation with new types of photocatalytic materials. Among all available means of promoting charge separation, regulation of charge flow through heterojunction is a well-accepted and effective approach in photocatalytic materials design. This review will summarize three of representative work of heterojunction design for photocatalyst contributed by our group: A ternary semiconductor-(semiconductor/metal) model (e.g., ZnS-(CdS/Au), ZnS-(CdS/Pd), and ZnS-(CdS/Pt)). In this design, a metallic nanoparticle (M) is interfaced with CdS. The difference of work function between M and CdS will drive the polarization charges flow from M to CdS until reaching equilibrium of Fermi levels. And then the Fermi level of CdS has a upshift. Therefore, the band alignment transforms from the straddling gap (type I) of ZnS-CdS heterojunction to the staggered gap (type II) of ZnS-(CdS/metal). As a result, photogenerated electrons are kept on the surface of ZnS and metal, and holes in the CdS. Improvement of photocatalysis performance in water splitting is attained through this architecture: a Ag2S-Ag-TiO2 hybrid nanostructure. We use the wide-bandgap semiconductor TiO2 and the narrow-bandgap semiconductor Ag2S to design the Z-scheme structure, and integrate an interfacial Ag between TiO2 and Ag2S. The interfacial Ag and Ag2S have strong hybridizations at the Ag-Ag2S interface, and form Schottky junction. The polarization charge at the interface of the Schottky junction flows from Ag to Ag2S until reaching the equilibrium. This causes a upshift in the Fermi level of Ag2S. But the electronic structure coupling of the TiO2-Ag interface is relatively weak. As a result, the polarization charge in Ag can hardly flows to the TiO2. Taken together, the energy band upshift of Ag2S enables the formation of the Z-scheme structure in the Ag2S-Ag-TiO2 system. Therefore, under the full-spectrum light illumination, photogenerated electrons in TiO2 flow towards Ag2S through the interfacial Ag, and then recombine with the photogenerated holes in Ag2S. This results in the accumulation of photogenerated electrons and holes in Ag2S and TiO2, respectively. Therefore, the ternary system forms a Z-scheme structure that allows for full-spectrum sunlight absorption; A ternary ZnS-CdS-Cu2S heteronanostructure. Through combination of CdS and ZnS, a bianry ZnS-CdS heteronanostructure exhibits the wide absorption range of vis and UV. We choose the NIR absorption Cu2S to incorporate into ZnS-CdS, so as to further absorb solar energy to reach the full-spectrum. To demonstrate the ZnS-CdS-Cu2S system for the separation of photogenerated electrons and holes, we utilize density functional theory to study the bandgap alignment. Both of ZnS and CdS are n-type semiconductor, and the work function of them are almost the same. So that the interaction between ZnS and CdS is very weak. The first-principles simulations demonstrate that the construction of p-n junction between CdS and Cu2S forms staggered gaps. Such band structure enables the ZnS-CdS-Cu2S system to separate photogenerated electrons and holes. In summary, steering charge flow in hetero-nanostructures via charge polarization can effectively modify the energy band alignment to promote the separation of photogenerated electron-hole pairs. It provides new ideas for the development of nano-semiconductor composites materials in photoelectric conversion and photocatalysis. At the same time, we also believe that a better photocatalytic material with its performance significantly imporved will be designed by adjusting the band structure.

Polaron States As a Massive Electron-Transfer Pathway at Heterojunction Interface.

An effective strategy for promoting charge separation by integrating heterojunctions and multiple homojunctions in TiO2 nanorods to enhance photoelectrochemical oxygen evolution

Manipulatable Interface Electric Field and Charge Transfer in a 2D/2D Heterojunction Photocatalyst via Oxygen Intercalation

Surface Polaron States on Single-Crystal Rutile TiO2 Nanorod Arrays Enhancing Charge Separation and Transfer

Facile Construction TiO2/ZnIn2S4/Zn0.4Ca0.6In2S4 Ternary Hetero-Structure Photo-Anode with Enhanced Photo-Electrochemical Water-Splitting Performance

Surface States As Electron Transfer Pathway Enhanced Charge Separation in TiO2 Nanotube Water Splitting Photoanodes

High performance hydrogen evolution energy conversion devices via p type polaron surface state modulation

Energy Band Engineering of Multi-Component Heteronanostructures by Polarization Charge Design

Potential-dependent polaron formation activates TiO2 for the hydrogen evolution reaction

Construction of Schottky-Assisted Z-scheme Heterojunction Cd0.3Zn0.7S@Ti3C2/Ag/CeO2 Boosted Carriers Charge Separation for Efficient Photocatalytic Hydrogen Production

Two-dimensional lateral anatase-rutile TiO 2 phase junctions with oxygen vacancies for robust photoelectrochemical water splitting

A Conductive Network and Dipole Field for Harnessing Photogenerated Charge Kinetics

Efficient charge separation and transportation using 1D iron-sulfide@titania heterojunctions as photoanodes for improved interface stability and photoelectrochemical activity to prodcue hydrogen

Lattice distortion induced internal electric field in TiO2 photoelectrode for efficient charge separation and transfer

Interfacial Engineering of TiO 2 /Ti 3 C 2 MXene/Carbon Nitride Hybrids Boosting Charge Transfer for Efficient Photocatalytic Hydrogen Evolution

Construction of Schottky-Assisted Z-scheme Heterojunction Cd0.3Zn0.7S@Ti3C2/Ag/CeO2 0.3 Zn 0.7 S@Ti 3 C 2 /ag/ceo 2 Boosted Carriers Charge Separation for Efficient Photocatalytic Hydrogen Production

Thermally Accelerated Surface Polaron Hopping in Photoelectrochemical Water Splitting.

Enabling Efficient Charge Separation for Optoelectronic Conversion Via an Energy-Dependent Z-Scheme N-Semiconductor-metal-p-semiconductor Schottky Heterojunction.

Interface Charge Separation in Cu2CoSnS4/ZnIn2S4 Heterojunction for Boosting Photocatalytic Hydrogen Production

Electron Donor–Acceptor Interface of TPPS/PDI Boosting Charge Transfer for Efficient Photocatalytic Hydrogen Evolution

Efficient design principle for interfacial charge separation in hydrogen-intercalated nonstoichiometric oxides