Abstract:Precise and high-speed sorting of individual target cells from heterogeneous populations plays an imperative role in cell research. Although the conventional fluorescence-activated cell sorter (FACS) is capable of rapid and accurate cell sorting, it occupies a large volume of the instrument and inherently brings in aerosol generation as well as cross-contamination among samples. The sorting completed in a fully enclosed and disposable microfluidic chip has the potential to eliminate the above concerns. However, current microfluidic cell sorters are hindered by the high complexities of the fabrication procedure and the off-chip setup. In this paper, a spark-cavitation-bubble-based fluorescence-activated cell sorter is developed to perform fast and accurate sorting in a microfluidic chip. It features a simple structure and an easy operation. This microfluidic sorter comprises a positive electrode of platinum and a negative electrode of tungsten, which are placed on the side of the main channel. By applying a high-voltage discharge on the pair of electrodes, a single spark cavitation bubble is created to deflect the target particle into the downstream collection channel. The sorter has a short switching time of 150 μs and a long lifespan of more than 100 million workable actions. In addition, a novel control strategy is proposed to dynamically adjust the discharge time to stabilize the size of the cavitation bubble for continuous sorting. The dynamic control of continuously triggering the sorter, the optimal delay time between fluorescence detection and cell sorting, and a theoretical model to predict the ideal sorting recovery and purity are studied to improve and evaluate the sorter performance. The experiments demonstrate that the sorting rate of target particles achieves 1200 eps, the total analysis throughput is up to 10,000 eps, the particles sorted at 4000 eps exhibit a purity greater than 80% and a recovery rate greater than 90%, and the sorting effect on the viability of HeLa cells is negligible.

Automated Raman Based Cell Sorting With 3d Microfluidics

Continuous Cell Sorting in A Flow Based on Single Cell Resonance Raman Spectra

Raman-activated Cell Sorting Based on Dielectrophoretic Single-Cell Trap and Release.

A 3D hydrodynamic flow-focusing device for cell sorting

Three-Dimensional (3d) Hydrodynamic Focusing for Continuous Sampling and Analysis of Adherent Cells

High-throughput single-cell sorting by stimulated Raman-activated cell ejection

Raman cell sorting for single-cell research

A Rigid Microfluidic Chip for High-Throughput Fluorescence-Activated Cell Sorting

Image-based cell sorting using focused travelling surface acoustic waves

3-D Visual Feedback For Automated Sorting Of Cells With Ultra-Low Proportion Under Dark Field

Optical Control in a 3D Flow-Focusing Microfluidic Sorting System

Enhanced cell sorting and manipulation with combined optical tweezer and microfluidic chip technologies.

Three-Dimensional Autofocusing Visual Feedback For Automated Rare Cells Sorting In Fluorescence Microscopy

Adhesion-based high-throughput label-free cell sorting using ridged microfluidic channels

A High-Throughput Microfluidic Cell Sorter Using a Three-Dimensional Coupled Hydrodynamic-Dielectrophoretic Pre-Focusing Module

Standing Surface Acoustic Wave (Ssaw)-Based Fluorescence-Activated Cell Sorter

Raman-Activated Droplet Sorting (RADS) for Label-Free High-Throughput Screening of Microalgal Single-Cells

Automated Sorting of Rare Cells Based on Autofocusing Visual Feedback in Fluorescence Microscopy.

Passive Focusing of Single Cells Using Microwell Arrays for High-Accuracy Image-Activated Sorting

Rapid Switching and Durable On-Chip Spark-Cavitation-bubble Cell Sorter

Cell sorting actuated by a microfluidic inertial vortex