Abstract:This study is aimed at the manufacture and the magnetic properties of polycrystalline M-type hexaferrites BaFe12O19 (barium ferrite, or BaM) materials of different magnetic texturing grades, going from a random distribution of the BaM crystallites to their almost complete stacking. Our target is to optimize the value of reduced-remanence magnetization MR/MS, which is among the most significant features of the self-polarized materials. In this study, we focus on the role played by the precursors hematite (isotropic spherical shape) and goethite (anisotropic lath shape). Therefore, 11 samples with a flat cylinder shape are fabricated, with an increasing hematite to goethite ratio. We demonstrate that this ratio drives the texturization of the samples by producing self-polarized materials with different MR/MS from the simple green compaction of the precursors, followed by a heat treatment. Most importantly, our study reveals the orientation of BaM particles after compaction; therefore, MR/MS, is strongly influenced by the aspect ratio of the lath-shaped goethite crystallites. Additionally, we show that finer goethite crystallites yield higher-value MR/MS. We optimize the aspect ratio of the goethite crystallites for an improved BaM texture. The optimization of the morphology of the goethite crystallites leads to an increase in the BaM particles' orientation and stacking. The salient outcome of this work, which distinguishes it significantly from recent works, is that the particles stacking increases with the value of the shape factor η (defined as the ratio of the diameter of the laths to their length) of the goethite, evidenced by XRD results. The Rietveld refinements of powder diffractograms and the measured magnetic properties reveal a particle-stacking enhancement caused by not only the ratio of hematite: goethite but mainly by an optimal aspect ratio of the goethite crystallites. Based on this study, the BaM materials are further manufactured with a controlled magnetic texture; thus, they are partly self-polarized. They show reduced-remanence magnetization MR/MS varying from 0.5 and 0.81, while the angular dispersion of the BaM particles' easy axis of magnetization varies from 60° to 10°. The magnetic properties of the samples are further studied in microwave experiments, from which the value of the magnetocrystalline anisotropy field HK = 16.6 kOe is deduced. The first magnetization curves of each sample are obtained using a VSM. A law of approach to the saturation suitable for the case of the uniaxial polycrystalline materials, and for which the particle stacking is only partial, is proposed for the fitting of the magnetization process. It is suggested that by using the proposed law with a known magnetocrystalline anisotropy constant K1, the angular grain-dispersion can be found.

Tailoring Magnetic Properties of Self-Biased Hexaferrites Using an Alternative Copolymer of Isobutylene and Maleic Anhydride

Crystallographically Textured and Magnetic LaCu-Substituted Ba-Hexaferrite with Excellent Gyromagnetic Properties

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Hexaferrite composites with sintering-induced texture for Snoek's product enhancement and magnetic loss suppression

Cation Distribution and Magnetic Characteristics of Textured BaFe12-xScxO19 Hexaferrites: Experimental and Theoretical Evaluations

Cation distribution and magnetic characteristics of textured BaFe12-Sc O19 hexaferrites: Experimental and theoretical evaluations

Crystallographically Textured Zn2W-type Barium Hexaferrite for Microwave and Millimeter Wave Applications

New Manufacturing Process for Granular Texture Management in Polycrystalline BaM Hexaferrites through the Goethite Crystallite Laths Aspect Ratio, and a Specialized Law of Approach to the Magnetic Saturation for Partly Polarized Uniaxial Materials

Anisotropic Reinforcement in Polymer Nanocomposites Using Dielectric-Magnetic Difunctional Fibers

Barium Hexaferrites with Narrow Ferrimagnetic Resonance Linewidth Tailored by Site‐controlled Cu Doping

Magnetic behavior of different modifications in low-fired Z-type polycrystalline hexaferrite

Magnetic Properties and Microwave Loss of Polycrystalline M-Type Barium Hexaferrite Thick Films by Tape Casting

Crystallographically textured Ba0.8La0.2Fe11.8-xCu0.2O19-δ hexaferrites with narrow FMR linewidth

Microstructure and Magnetic Characteristics of Low-Temperature-fired Modified Z-type Hexaferrite with Bi/sub 2/o/sub 3/ Additive

Phase formation, microstructure and gyromagnetic properties of c-axis oriented M-type hexaferrite applied to self-biased circulator

Microstructure and Magnetic Properties of Low-Temperature Sintered M-type Hexaferrite BaZn0.6Sn0.6Fe10.8O19 for LTCC Process

Effects of Bi2O3–CaCu3Ti4O12 Composite Additives on Micromorphology, Static Magnetic Properties, and FMR Linewidth ΔH of NCZ Ferrites

Tailoring magnetostriction and magnetic domains of -oriented Fe80Ga16Al4 alloy by magnetic field annealing

Thermomechanical properties of confined magnetic nanoparticles in electrospun polyacrylonitrile nanofiber matrix exposed to a magnetic environment: Structure, Morphology, and Stabilization (Cyclization)

Electric field control of the ferromagnetic resonance linewidth in synthetic antiferromagnetic heterostructure