Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Slab Waveguide-to-Fiber Coupling Based on Multiplane Light Conversion

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Coupling between multimode fibers and slab waveguides

Interlayer Slope Waveguide Coupler for Multilayer Chalcogenide Photonics

Single-mode-fiber-matched waveguide by silver/sodium ion-exchange and field-assisted ion-diffusion

Robust Slab-Coupled Buried-Rib Semiconductor Laser with High Fibre Coupling Efficiency

Low-loss mode converter for coupling light into slotted photonic crystal waveguide

Ultracompact low-loss coupler between strip and slot waveguides.

Very Low-Loss Fiber-To-Waveguide Coupling Using Diffraction Optical Element Mode Converter

Uniform-loss Cyclic Arrayed Waveguide Grating Router Using a Mode-Field Converter Based on a Slab Coupler and Auxiliary Waveguides.

Unidirectional Optical Coupling for Plasmonic Waveguide Based on Metallic-Dielectric High Contrast Gratings

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Low-loss Fiber-to-Waveguide Coupling Using Diffractive Optical Element

Light Transmission along A Slab Waveguide with A Core of Anisotropic Metamaterial

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Low-loss Grating Coupler with a Gradient Index-Matching Subwavelength Structure

Experimental Demonstration of an Apodized-Imaging Chip-Fiber Grating Coupler for Si_3N_4 Waveguides

Low-loss fiber grating coupler on thin film lithium niobate platform