Abstract:In this study, we synthesized a typical iron-based metal-organic framework, MIL-88B (Fe), and constructed a MIL-88B (Fe)/persulfate/visible light (M88/PS/Vis) system for photocatalytic degradation of bisphenol A (BPA) in aqueous solution. The removal efficiency, environmental factors, and degradation mechanism and pathways were explored. The results showed that there were synergistic effects in the M88/PS/Vis system: BPA (10 mg/L) could be removed completely within 25 min with 0.6 g/L M88 and 2 mM PS under visible light, while the removal rates with individual M88/Vis or M88/PS was only 26.0% and 34.1%, respectively. In addition, the BPA degradation rate in the M88/PS/Vis system (0.107 min(-1)) was 4.7 times higher than that in the M88/PS system (0.023 min(-1)) and 8.9 times higher than that in the M88/Vis system (0.012 min(-1)), respectively. Additionally, environmental factors could strongly impact the degradation of BPA in the studied system in which O-2(center dot-) and SO4 center dot- played a dominant role. More importantly, risk assessment in the BPA/M88/PS/Vis system was, for the first time, estimated in our study via the "ecological structure activity relationships" program at three trophic levels and Cell Counting Kit-8 method. Although there were some intermediates with higher biological toxicity than BPA and increased the toxicity of solution, most intermediates were one or more level less toxic than BPA. In most cases, the toxicity of solutions were lower than the initial samples, which demonstrated the effectiveness of M88/PS/Vis system in the reduction of toxicity of BPA, and the toxicity hazard in general could be effectively avoided by prolonging the duration of light exposure. This research provides a profound understanding of the potential application of PS activation by photocatalyst for both BPA removal and toxicity shift under visible light.

Influence of Preparation Conditions of MIL-88A on Catalytic Degradation of Orange G and Dibutyl Phthalate

[MIL-88A@MIP Activated Persulfate for Targeted Degradation of Dibutyl Phthalate].

Metal–organic Frameworks MIL-88A with Suitable Synthesis Conditions and Optimal Dosage for Effective Catalytic Degradation of Orange G Through Persulfate Activation

Improvement of Selective Catalytic Oxidation Capacity of Phthalates from Surface Molecular-Imprinted Catalysis Materials: Design, Mechanism, and Application

Enhanced Degradation of Dimethyl Phthalate in Wastewater Via Heterogeneous Catalytic Ozonation Process: Performances and Mechanisms

REMOVAL OF PARTICULAR POLLUTANTS IN PAPERMAKING WASTEWATER BY ADSORPTION-CATALYTIC OZONATION

Degradation of bisphenol A by peroxymonosulfate activated with MIL-88B(Fe) derived CC-Fe/C catalysts: Effect of annealing temperature, performance and mechanism

Combining photocatalytic and electrocatalytic oxidation for dibutyl phthalate degradation: the influence of carbon-coated titanium anode and metal oxide catalysts

Catalytic Oxidation of Dimethyl Phthalate in Aqueous Solution by Aluminum Oxide

Catalytic Ozonation of Dimethyl Phthalate Using Fe3O4/multi-wall Carbon Nanotubes.

Sustainable conversion of polyethylene plastic bottles into terephthalic acid, synthesis of coated MIL-101 metal–organic framework and catalytic degradation of pollutant dyes

Nearly zero peroxydisulfate consumption for persistent aqueous organic pollutants degradation via nonradical processes supported by in-situ sulfate radical regeneration in defective MIL-88B(Fe)

Removal of Phthalate from Papermaking Wastewater by MIL-101(Fe) in the Presence of Persulfate

Activation of peroxydisulfate by MIL-88A(Fe) under visible light toward tetracycline degradation: Effect of synthesis temperature on catalytic performance

M88/PS/Vis System for Degradation of Bisphenol A: Environmental Factors, Degradation Pathways, and Toxicity Evaluation

Alginate/MIL-88B(Fe) Derived Magnetic Biochar Bead for Non-Radical Degradation of Organic Pollutant with Low Peroxymonosulfate Consumption

Activation of Persulfate by Molecularly Imprinted Fe-MOF-74@SiO2 for the Targeted Degradation of Dimethyl Phthalate: Effects of Operating Parameters and Chlorine

Preparation of poly(acrylamide-diallyldimethylammonium chloride)(PDA)and application to removal of dimethyi phthalate in water

Selective Removal and Persulfate Catalytic Decomposition of Diethyl Phthalate from Contaminated Water on Modified MIL100 Through Surface Molecular Imprinting.

Performance study of Cu doped MIL-88B-Fe in activation of H2O2 for organic pollutants degradation

MIL-88A(Fe)/g-C 3 N 4 composite and its catalytic membrane for tetracycline removal via peroxydisulfate activation: Performance, mechanism and toxicity evaluation