Abstract:The frequency of urban storms has increased, influenced by the climate changing and urbanization, and the process of urban rainfall runoff has also changed, leading to severe urban waterlogging problems. Against this background, the risk of urban waterlogging was analyzed and assessed accurately, using an urban stormwater model as necessary. Most studies have used urban hydrological models to assess flood risk; however, due to limited flow pipeline data, the calibration and the validation of the models are difficult. This study applied the MIKE URBAN model to build a drainage system model in the Beijing Future Science City of China, where the discharge of pipelines was absent. Three methods, of empirical calibration, formula validation, and validation based on field investigation, were used to calibrate and validate the parameters of the model. After the empirical calibration, the relative error range between the simulated value and the measured value was verified by the formula as within 25%. The simulated runoff depth was consistent with a field survey verified by the method of validation based on field investigation, showing the model has good applicability in the study area. Then, the rainfall scenarios of different return periods were designed and simulated. Simulation results showed that, for the 10-year return period, there are overflow pipe sections in northern and southern regions, and the number of overflow pipe sections in the northern region is more than that in the southern region. For the 20-year return period and 50-year return period, the number of overflow pipe sections and nodes in the northern region increased, while for the 100-year return period, the number of overflow nodes both increased. With the increase in the rainfall return period, the pipe network load increased, the points and sections prone to accumulation and waterlogging increased, and the regional waterlogging risk increased. The southern region is prone to waterlogging because the pipeline network density is higher than that in the northern region and the terrain is low-lying. This study provides a reference for the establishment of rainwater drainage models in regions with similar database limitations and provides a technical reference for the calibration and validation of stormwater models that lack rainfall runoff data.

Research on Urban Flood Control and Drainage Model

Urban Flood Risk Assessment Using Storm Characteristic Parameters Sensitive to Catchment-Specific Drainage System

Impact of Spatial Variation and Uncertainty of Rainfall Intensity on Urban Flooding Assessment

Simulation of Urban Rainstorm Waterlogging and Pipeline Network Drainage Process Based on SWMM

The Application of Storm Water Management Model in Comprehensive Planning of Urban Drainage and Flood Control

Urban Pluvial Flood Modeling by Coupling Raster-Based Two-Dimensional Hydrodynamic Model and SWMM

Modelling urban flooding integrated with flow and sediment transport in drainage networks

Improvement of City Rainfall Model Subcatchment Structure Based on Urban Hydrology Process

Hydrologically Enhanced Distributed Urban Drainage Model and Its Application in Beijing City

Urban rainstorm and waterlogging scenario simulation based on SWMM under changing environment

Urban Flood Modeling and Risk Assessment with Limited Observation Data: The Beijing Future Science City of China

Urban Drainage Efficiency Evaluation and Flood Simulation Using Integrated SWMM and Terrain Structural Analysis.

Simulative Analysis on Storm Flood in Typical Urban Region of Beijing Based on SWMM

Response of urban floods to two coupling modes of surface and pipe flow models

Urban stormwater forecasting model and drainage optimization based on water environmental capacity

An Improved Coupled Hydrologic-Hydrodynamic Model for Urban Flood Simulations Under Varied Scenarios

Analysis of Drainage Capacity of Urban Conduits Based on SWMM

Urban flood simulation based on the SWMM model

Assessment of the service performance of drainage system and transformation of pipeline network based on urban combined sewer system model

Enhancing Road Drainage Systems for Extreme Storms: Integration of a High-Precision Flow Diversion Module into SWMM Code

A two-dimensional hydrodynamic urban flood model based on equivalent drainage of manholes