Abstract:This paper introduces the Guide-Weight method (GW) into the topology optimization of continuum structures subjected to body force loads. Given the design-dependent characteristic of body-forces, three main difficulties are encountered when dealing with topology optimization problems under this load condition, namely, the non-monotonous behavior of the compliance, inactive volume constraint of the optimum, and parasitic effect in low-density regions. Numerous researchers have attempted to solve this problem with mathematical programming or heuristic methods, but all these methods share the significant weakness of low computational efficiency. Accordingly, we propose to solve this problem with an Optimality Criteria method, i.e. the GW method. First, all theoretical derivations of topology optimization with the GW method are carried out, and the iteration procedure with GW is presented. Then, some typical examples of withstanding body forces are tested, and the topologies got in this paper are compared with corresponding results obtained by former researchers. The iteration speed is found to improve significantly when utilizing the GW method to deal with this kind of problems. Finally, considering all the above examples are optimized with SIMP model, we try to combine RAMP model with the GW method. The distinction between the models of SIMP and RAMP when using GW to solve topology optimization problems under body forces are investigated, which indicates that although both these two interpolation models are able to yield very similar optimal results if suitable parameters are chosen, there is more superiority for RAMP model to get clearer topologies. (C) 2013 Elsevier B.V. All rights reserved.

Topology Optimization of Compliant Mechanisms Using Guide-Weight Method

Guide-Weight Method For Topology Optimization Of Continuum Structures Including Body Forces

Topology optimization of compliant mechanisms including links, supports and material distribution

Guide-weight Method on Solving Topology Optimization Problems under Single Load Case

Solving Topology Optimization Problems by the Guide-Weight Method

A new solution for topology optimization problems with multiple loads: The guide-weight method

Design of compliant mechanisms using continuum topology optimization: A review

A new method for optimizing the topology of hinge‐free and fully decoupled compliant mechanisms with multiple inputs and multiple outputs

Topology optimization of a spatial compliant parallel mechanism based on constant motion transmission characteristic matrix

Topology Optimization of Thermoelastic Structures Using the Guide-Weight Method

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Topology Optimization for the Arm of Flight Simulator under Inertial Loads

Design of compliant mechanisms: An explicit topology optimization method using end-constrained spline curves with variable width

Dual multi-objective optimization design method for compliant guide mechanism

Topology Optimization of Compliant Mechanisms Considering Manufacturing Uncertainty, Fatigue, and Static Failure Constraints

Topology Optimization Of Compliant Mechanisms Based On Interpolation Meshless Method And Geometric Nonlinearity

Topology-optimization based design of multi-degree-of-freedom compliant mechanisms (mechanisms with multiple pseudo-mobility)

Compliant Mechanism Synthesis Using Nonlinear Elastic Topology Optimization With Variable Boundary Conditions

Topology optimization for rigid and compliant hybrid mechanisms