INVERSION OF PHASE VELOCITIES OF SURFACE WAVES WITH HIGH MODES
Jianghai Xia,Richard D. Miller,Choon B. Park
1999-01-01
Abstract:Elastic properties of near-surface materials and their effects on seismic wave propagation are of fundamental interest in groundwater, engineering, and environmental studies. As an example, Imai and Tonouchi (1982) studied compressional (P) and shear (S) wave velocities in an embankment, and also in alluvial, diluvial, and Tertiary layers, showing that S-wave velocities (Vs) in such deposits correspond to the N-value (Vs = 97.0 × N 0.314 ), an index value of formation hardness used in soil mechanics and foundation engineering. S-wave velocity is also used to determine "stiffness," one of the key earth proper- ties in construction engineering. The S-wave velocity profile, a function of depth, can be derived from inverting the phase velocity of the surface (Rayleigh and/or Love) wave. The Rayleigh-wave phase velocity of a layered earth model is a func- tion of frequency and four groups of earth parameters: P-wave velocity, S-wave velocity, density, and thickness of layers. Estimations of S-wave velocity from ground roll, a particular type of Rayleigh wave, have for the most part focused almost exclusively on the fundamental mode of Rayleigh waves. The technique developed to determine the shear wave velocity from the fundamental mode using multichannel recording consists of: 1) acquisition of wide band ground roll using a multichannel recording system; 2) creation of efficient and accurate algorithms to extract Rayleigh-wave dispersion curves from ground roll using a basic, robust, and pseudo-automated processing sequence (Park et al., 1999); and 3) development of stable and efficient inversion algorithms to obtain S-wave velocity profiles (Xia et al., 1999). This technique has also been successfully applied to map a bed rock interface and voids based on S-wave velocity anomalies (Miller et al., 1999). Empirically it has been shown that higher mode energy tends to become more dominant as the source-offset distance becomes larger. In some cases, the shorter wavelength components of the fundamental mode Rayleigh waves are obscured by more dominant higher modes of Rayleigh waves in a higher frequency range, making analysis of higher mode data essential. Analysis of the Jacobian matrix for high frequencies (5-40 Hz) provides a measure of higher-mode dispersion curve sensitiv- ity to earth model parameters. S-wave velocity is the dominant influence of the four earth model parameters in higher-mode dispersion curves. Modeling results demonstrate at least two unique and useful properties of higher modes. First, we know that the penetrating depth of surface waves is limited by a wavelength of a surface-wave component. For fundamental and higher mode Rayleigh wave data with the same wavelength, higher modes penetrate deeper (longer than the wavelength) than the fundamental mode (normally shorter than the wavelength). For the layer model (Xia et al., 1999), in order to "see" a depth of 17 m, a wavelength of 12.3 m is required for fundamental mode data. For the second-mode data, however, a com- ponent with a wavelength of 10.9 m can penetrate a depth of 17 m. For the third-mode data, a component with a wavelength of only 6 m can "see" a depth of 17 m. We concluded that high-mode Rayleigh-wave data can "see" deeper in comparison to the same wavelength components of the fundamental mode Rayleigh-wave data.