Abstract:Advanced device sensing technology is a prerequisite for achieving intelligent state identification of power equipment. However, accurately sensing voltage signals remains a common challenge for almost all high-voltage equipment, and conventional voltage sensors are inadequate in meeting the existing non-contact voltage measurement requirements. This paper investigates the distribution of electric fields in insulated wires, explores the voltage-electric field relationship under regional boundary conditions, proposes a non-contact voltage measurement method based on electric field perception, and validates the principle through experimental methods. The results indicate that the insulation skin has little effect on the external electric field distribution intensity of transmission lines. By using non-contact voltage measurement methods coupled with electric fields, high-precision measurement of voltage within the range of 4 kV to 20 kV can be achieved, with measurement accuracy reaching level 0.2. Real-time monitoring of voltage waveforms, including power frequency AC, triangular wave, and pulse signal, can be achieved with a maximum phase error within 0.1°. Due to the sharp slope of the pulse edge, there may be slight burrs in peak voltage measurement; however, overall measurement error remains within 1%. This indicates that the method exhibits high measurement accuracy for voltage signals of varying waveforms, enabling real-time and precise voltage measurement feedback. As such, it holds significant potential in facilitating intelligent perception and fault self-healing within smart grid systems.

Method for online detecting unfavorable insulator of power transmission circuit

Early Warning Of Current-Carrying Faults Based On Deterioration Assessment Of Electric Contacts

An Online Groundwall and Phase-to-Phase Stator Insulation Monitoring Method for Inverter-Fed Machine.

Live-line detection of deteriorated insulators on overhead transmission lines based on electric field distribution

Detection and Location Approach to Incipient Grounding Defect in Transformer Winding Based on Sequence Voltage Ratios at PV Inverter Switching Frequency

Design of Online Intelligent Detection System for Power Quality and Fault Identification in Distribution Networks

The Application of Non-Invasive Sensor in Unbalanced Three-Phase Current Detecting

A Novel Insulation Parameter Online Measuring Technique Based on Two Voltage Transformers for Distribution Networks

On-line monitoring method for long distance power cable insulation

Comparative Study of Neutral-Voltage-Based and Leakage-Current-Based Online Condition Monitoring Methods for Stator Insulation of Inverter-Fed Machines

Insulation Parameter Online Measurement Technology Based on Extended Zero-Sequence Circuits for Resonant Grounding Distribution Networks

Designing an Automatic Detector Device to Diagnose Insulator State on Overhead Distribution Lines

Online Condition Monitoring of Line-end Coils Insulation for Inverter-fed Machine by Switching Oscillation Mode Decomposition

Research on Non-Contact Voltage Measurement for Insulated Transmission Line

Online Condition Monitoring of Line-End Coil Insulation for Inverter-Fed Machine by Switching Oscillation Mode Decomposition

A Health Condition Indicator Localization Method for The Power Devices in Three-phase Inverter

An Improved Online Stator Insulation Monitoring Method Based on Common-Mode Impedance Spectrum Considering the Effect of Aging Position

Noninvasive method for online detection of internal winding faults of 750 kV EHV shunt reactors

A Noninvasive Interturn Insulation Condition Monitoring Method Based on the Common-Mode Impedance Spectrum of Inverter-Fed Machines

Non-Contact Voltage Reconstruction Method Based on Dual-Pin Type Probes Structure and Measuring Point Optimization for AC Overhead Transmission Lines