Abstract:Cobaltite-based perovskite materials such as La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF), Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3−δ (BSCF) which have rapid surface activation and mixed ionic and electronic ionic conductivity (MIEC) usually mixed with ionic conducting electrolyte material to lower cathodic polarization resistance. Moreover, decreasing the particulate size of the cathode at nanoscale can effectively enhance the ORR activity of the cathode by extending the electrochemically active sites due to its high surface area. However, due the high surface energy, the nanoparticles easily aggregate before mixing into homogeneous heterophase nanoparticles, resulting in significant coarsening between adjacent particles during high-temperature sintering. In this study, GDC and LSCF-GDC composite powders were synthesized via advance sol-gel method. The physicochemical properties such as sintering behavior, phase stability, etc. of the synthesized nanopowders were investigated. The optimal sintering conditions of GDC nanopowders were evaluated based on the relative density and total conductivity of the sintered GDC pellets. Furthermore, the electrochemical performances of the LSCF-GDC nanocomposite cathodes were measured by the electrochemical impedance spectroscopy (EIS). The microstructural characteristics of the LSCF-GDC nanocomposite cathode were quantified via a 3D reconstruction techniques and related to electrochemical performance of the Ni-YSZ anode supported SOFC single cell.

In-situ synthesis of LSCF-GDC composite cathode materials for Solid Oxide Fuel Cells

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

La 0.6 Sr 0.4 CoO 3− Δ –ce 0.8 Gd 0.2 O 2− Δ Nanocomposites Prepared by a Sol–gel Process for Intermediate Temperature Solid Oxide Fuel Cell Cathode Applications

One Dimensional La0.8Sr0.2Co0.2Fe0.8O3−δ/Ce0.8Gd0.2O1.9 Nanocomposite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Enhancement of Electrochemical Performance for Proton Conductive Solid Oxide Fuel Cell by 30%GDC-LSCF Cathode

Liquid Plasma Sprayed Nano-Network La0.4sr0.6co0.2fe0.8o3/Ce0.8gd0.2o2 Composite As A High-Performance Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Electrochemical Evaluation of La0.6Sr0.4Co0.8Fe0.2O3−δ–La0.9Sr0.1Ga0.8Mg0.2O3−δ Composite Cathodes for La0.9Sr0.1Ga0.8Mg0.2O3−δ Electrolyte SOFCs

Solid Oxide Fuel Cells Supported on Cathodes with Large Straight Open Pores and Catalyst-Decorated Surfaces

Effect of La0.8Sr0.2Co0.2Fe0.8O3−δ morphology on the performance of composite cathodes

Improving the Stability of La0.6Sr0.4Co0.2Fe0.8O3-δ Electrode for Solid Oxide Fuel Cells by Introducing Sintering Inhibitors

Highly Active and Robust La0.8sr0.2co0.2fe0.8o3-Δ Fiber Based Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Sol-gel derived composites as cathodes for solid oxide fuel cells

Preparation and Performance Study of One-Dimensional Nanofiber-Based Sm0.5Sr0.5CoO3-δ-Gd0.2Ce0.8O1.9 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Co‐synthesis of Sm0.5Sr0.5CoO3‐Sm0.2Ce0.8O1.9 Composite Cathode with Enhanced Electrochemical Property for Intermediate Temperature SOFCs

Study on durability of novel core-shell-structured La0.8Sr0.2Co0.2Fe0.8O3-δ@Gd0.2Ce0.8O1.9 composite materials for solid oxide fuel cell cathodes

Performance of LST-GDC Composite Anodes for Solid Oxide Fuel Cells

LSCF Nanopowder from Cellulose–Glycine-Nitrate Process and its Application in Intermediate-Temperature Solid-Oxide Fuel Cells

Preparation and Oxygen-reduction Mechanism Investigation of Nanostructure LSCF-SDC Composite Cathodes

Chemical Compatibility, Thermal Expansion Matches and Electrochemical Performance of SrCo0.8Fe0.2O3−δ–La0.45Ce0.55O2−δ Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Enhanced Electrochemical Performance and Operating Stability of La0.8Sr0.2Co0.2Fe0.8O3-δ Fiber Cathode Via Gd0.2Ce0.8O1.9-δ Coating for Intermediate Temperature Solid Oxide Fuel Cells