Abstract:The inefficiency of grain refinement processes has traditionally been attributed to the limited utilization of heterogeneous nucleation particles within master alloy systems, resulting in the formation of abundant inactive particles. This study aims to investigate the alternative influences of particles by incorporating external micrometer-sized TiB2 particles into the grain refinement process. Through a series of experiments, the refinement efficiency, grain refinement mechanism, and resultant microstructure of TiB2 particle-induced grain refinement specimens are comprehensively examined using various microscopy and analytical techniques, including polarization microscopy (OM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). Our findings demonstrate a direct correlation between increased levels of TiB2 particles and enhanced grain refinement efficiency. Moreover, the microstructure analysis reveals the distribution of TiB2 particles along grain boundaries, forming a coating due to self-assembly phenomena, while regions with a lower particle content may exhibit irregular grain structures. DSC analysis further confirms reduced undercooling, indicating the occurrence of heterogeneous nucleation events. However, TEM observations suggest that heterogeneous nucleation is not significantly influenced by the growth restriction factor attributed to TiAl3 2DC compounds. The grain refinement mechanism involving TiB2 particles is elucidated to entail both heterogeneous nucleation and physical growth restriction effects. Specifically, a reduction in average grain size is attributed not only to heterogeneous nucleation but also to the physical growth restriction effect facilitated by the TiB2 particle coating. This study offers insights into leveraging particles that do not participate in heterogeneous nucleation within master alloy-based grain refinement systems.

Grain Refinement of Commercially Pure Aluminum with Addition of Ti and Zr Elements Based on Crystallography Orientation

Grain Refinement of Al-5Ti-0.62C-0.2Nd Grain Refiner for Commercial Pure Aluminum and Its Effect on Mechanical Properties

Study on Grain Refining and Metamorphism of ZL111 Aluminium Alloys

Dual Grain Refinement Effect for Pure Aluminum with the Addition of Micrometer-Sized TiB2 Particles

Development of Mechanism of Grain Refinement in Aluminum

The grain refinement of high-purity aluminum by aluminum-transition metal alloys

Development of Grain Refinement in Aluminium Field

Grain and lamellar refinement in TiAl based alloy by yttrium addition

On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Master Alloys

Grain Refinement by Trace Tib2 Addition in Conventional Cast Tial-Based Alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Research on Grain Refinement of Sc and Zr Addition in an Al-Mg-Zn Alloy from Experiments and First-Principles Calculations

Grain Refinement Mechanisms of TiC0.5N0.5 Nanoparticles in Aluminum

Influence of Fe on grain nucleation and growth of pure aluminum during refining by Al-Ti-B and Al-Ti-C master alloys

Quantities of grains of aluminum and those of TiB2 and Al3Ti particles added in the grain-refining processes

Grain Refinement Mechanism of Al-5Ti-1B Master Alloy by Ab Initio Calculations

Research of Grain Refining on Pure Al by Three Different Master Alloys

Performance Comparison of AlTiC and AlTiB Master Alloys in Grain Refinement of Commercial and High Purity Aluminum

Effect of Fe and Si on Grain Refinement of Commercial Purity Aluminum

Enhanced grain refinement and mechanical properties of a high–strength Al–Zn–Mg–Cu–Zr alloy induced by TiC nano–particles

Differences of Grain-Refining Effect of Sc and Ti Additions in Aluminum by Empirical Electron Theory Analysis