Abstract:Purpose This research aims to provide a theoretical method and data supports for a future study on interfacial reaction mechanism and spreading mechanism between molten solder and V-shaped substrate, which also gives guidance for those complicated welding operation objects in brazing technique. Design/methodology/approach Wetting experiments were performed to measure the contact angles at different temperatures of molten Sn-3.0Ag-0.5Cu wetting on the quartz substrate with an included angle of 90°. According to the experimental results, the theoretical spreading morphology of molten solder on V-shaped substrate at corresponding temperature was simulated by Surface Evolver. Findings The theoretical morphology profiles of the molten solder sitting on the V-shaped substrate are simulated using Surface Evolver when the molten solder reaches spreading equilibrium. The spreading mechanisms as well as the impact of surface tension and gravity on interfacial energy of the molten solder wetting on the V-shaped groove substrate are also discussed where theoretical results agree well with experiment results. The contact area between the gas and liquid phases shows a tendency of first increasing and later decreasing. Otherwise, the spreading distance and the height of the molten solder increases as the droplet volume increases as the included angle and the contact angle are given as constants, and both the interfacial energy and the gravitational energy increase as well. This research has a wide influence on predicting the outcomes in commercial impact and also gives guidance for those complicated welding operation objects in brazing technique. Research limitations/implications It is of very important significance in both science and practice to investigate the differences between the flat surface and V-shaped surface. Some necessary parameters including intrinsic contact angle and surface tension need to be directly measured when the droplet spreads on the flat surface. The relevant simulation conclusions on the inherent characteristics can be given based on these intrinsic parameters. Compared with the flat surface, the V-shaped substrate is chosen for further discuss on the effects of gravity on the droplet spreading behavior and the changes of apparent contact angle which can only occurs as the substrate is inclined. Therefore, this research provides theoretical method and data supports for a future study on interfacial reaction mechanism and spreading mechanism between molten solder and substrate. Practical implications The research is developed for verifying the accuracy of the model built in Surface Evolver. Based on this verified model, other researches on the spreading distance along y-axis and the contact area that are especially difficult to be experimentally measured can be directly simulated by Surface Evolver, which can provides a convenient method to discuss the changes of horizontal spreading distance, droplet height and contact area with increasing the included angle of V-shaped substrate or with increasing the droplet volume. Actually, the modeling results are calculated for supplying the theoretical parameters and technical guidance in the welding process. Social implications This research provides theoretical method and data supports for a future study on interfacial reaction mechanism and spreading mechanism between molten solder and substrate, which has a wide influence on prediction the outcomes in commercial impact and also gives guidance for those complicated welding operation objects in brazing technique. Originality/value Surface Evolver, can also be used to discuss the structure and spreading mechanism of droplets on V-shaped substrates, which have not been discussed before.

Microscale Contrastive Analysis in the Low Miller Index Plane Effect on Spreading Behavior

Molecular Simulations in Tin Droplet Spreading on Different Surface of Copper Plate

Wetting Behavior of Cu Droplets on Fe Surfaces: Insights from Molecular Dynamics Simulations

Molecular Dynamics Simulations of Low Index Surfaces Melting Behaviors for Metal Cu

Anisotropic Spreading of Liquid Metal on A Rough Intermetallic Surface

Molecular Dynamics Simulation and Analysis of Bulk and Surface Melting Processes for Metal Cu

Anisotropic wetting properties on a precision-ground micro-V-grooved Si surface related to their micro-characterized variables

Molecular dynamics simulations and analyzation of Cu deposited on stainless steel substrate surfaces

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

A Comparative Study of Reactive Wetting of Lead and Lead-Free Solders on Cu and (Cu 6 Sn 5 /Cu 3 Sn)/Cu Substrates

Preferential Spreading of Molten Metal over an Anisotropically Microstructured Surface

Molecular Dynamics Simulation of Diffusion Behavior Between the Interface of Cu/Sn

A Comparative Study of Reactive Wetting of Lead and Lead-Free Solders on Cu and (Cu<sub>6</sub>Sn<sub>5</sub>/Cu<sub>3</sub>Sn)/Cu Substrates

Pronounced modification of the wetting and spreading behavior of molten Ag-Cu alloy on TC4 substrate in response to high magnetic fields

On the Microcrystal Structure of Sputtered Cu Films Deposited on Si(100) Surfaces: Experiment and Integrated Multiscale Simulation

Wettability and Spreadability Study of Molten Sn-3.0Ag-0.5Cu Wetting on V-shaped Substrate

Local Spin-Density Theory of Interface and Surface Magnetocrystalline Anisotropy: Pd/Co/Pd(001) and Cu/Co/Cu(001) Sandwiches

Anisotropy analysis of the surface stress and surface energy in Cu surfaces with the modified embedded atom method

The Influence of Adventitious Carbon Groups on the Wetting of Copper: A Study on the Effect of Microstructure on the Static Contact Angle

MOLECULAR DYNAMICS SIMULATIONS OF NANOMA-CHINING MECHANISM AND THERMAL EFFECTS OF SINGLE CRYSTAL Cu

Wetting State Transition of Laser Direct Writing Aluminum Surface Based on Coupling Effect of Micro/Nanoscale Characteristics