Abstract:The reliability of computational fluid dynamics (CFD) codes is checked by comparing simulations with experimental data. A typical data set consists chiefly of velocity and temperature readings, both ideally having high spatial and temporal resolution to facilitate rigorous code validation. While high resolution velocity data is readily obtained through optical measurement techniques such as particle image velocimetry, it has proven difficult to obtain temperature data with similar resolution. Traditional sensors such as thermocouples cannot fill this role, but the recent development of distributed sensing based on Rayleigh scattering and swept-wave interferometry offers resolution suitable for CFD code validation work. Thousands of temperature measurements can be generated along a single thin optical fiber at hundreds of Hertz. Sensors function over large temperature ranges and within opaque fluids where optical techniques are unsuitable. But this type of sensor is sensitive to strain and humidity as well as temperature and so accuracy is affected by handling, vibration, and shifts in relative humidity. Such behavior is quite unlike traditional sensors and so unconventional installation and operating procedures are necessary to ensure accurate measurements. This paper demonstrates implementation of a Rayleigh scattering-type distributed temperature sensor in a thermal mixing experiment involving two air jets at 25 and 45 °C. We present criteria to guide selection of optical fiber for the sensor and describe installation setup for a jet mixing experiment. We illustrate sensor baselining, which links readings to an absolute temperature standard, and discuss practical issues such as errors due to flow-induced vibration. This material can aid those interested in temperature measurements having high data density and bandwidth for fluid dynamics experiments and similar applications. We highlight pitfalls specific to these sensors for consideration in experiment design and operation.

Review on Fiber Optic Sensing Technologies Applicable for Hypersonic Wind Tunnel Experiments

Fiber optic sensing technologies potentially applicable for hypersonic wind tunnel harsh environments

Microfiber Optical Sensors: A Review

Advancements in Tunable Diode Laser Absorption Spectroscopy for Hypersonic Wind Tunnel Testing

Tapered Optical Fiber Sensing Technology

Ultrasensitive all-fiber inline Fabry-Perot strain sensors for aerodynamic measurements in hypersonic flows

Fiber-Optic Sensing System for Investigating Flow Drag in Airflow Field

APPLICATION AND PROSPECT OF FIBER OPTIC SENSING TECHNOLOGY IN TUNNEL ENGINEERING

Research progress on aero-optical effects of hypersonic optical window with film cooling

Differential-pressure Fiber-Optic Airflow Sensor for Wind Tunnel Testing.

Fiber-optic Integrated Aerodynamic Three-Hole Vector Probe for High-Velocity Flow Field Measurement

Review of Fiber Mechanical and Thermal Multi-Parameter Measurement Technologies and Instrumentation

A Review of Optical Fiber Sensing Technology Based on Thin Film and Fabry–Perot Cavity

A Comprehensive Study of Optical Fiber Acoustic Sensing

An FBG-Based Sensor Tailor-Made for Wind Pressure Monitoring of High-Speed Trains

Optical fiber sensor based on helical Fibers: A review

Fiber Optic Distributed Sensors for High-resolution Temperature Field Mapping

A Fiber Optic Ultrasonic Sensing System for High Temperature Monitoring Using Optically Generated Ultrasonic Waves

Recent Progress in Distributed Fiber Optic Sensors

Fiber-Optic Hot-Wire Anemometer With Directional Response Based on Symmetry-Breaking Induced Heat Transfer Mechanism

A Review of Hybrid Fiber-Optic Distributed Simultaneous Vibration and Temperature Sensing Technology and Its Geophysical Applications