Abstract:The fluence (defined as energy per unit area) of light transmitted through a medium is normally linearly proportional to that of incident light (Fig. 1a). In other words, the transmittance (or rate of transmission) of light is usually independent of incident fluence (Fig. 1b), obeying the classic Beer's law. However, some optical materials can nonlinearly attenuate the transmitted light through a photophysical process referred to as optical power limiting (OPL)1, 2. It has been generally believed that such a process can only occur when the incident light is extremely intense, as in the case of a pulsed laser beam. Reporting in Nature Materials, Shuzo Hirata, Chihaya Adachi, Martin Vacha and co-workers now demonstrate that the OPL process can occur even in an 'ordinary' optical system with the incident light being the weak continuous beam from a commonly used xenon lamp3. OPL is often associated with a process named reverse saturable absorption (RSA)1, 2. Irradiation by intense laser pulses has been a prerequisite for RSA to occur4, 5, 6. As shown in Fig. 1c, an excited molecule can undergo intersystem crossing (ISC) from the first singlet state (S1) to the first triplet state (T1). When the ISC rate is fast and the ISC efficiency is high, the excitons will be populated in the T1 state. If the excited molecules in the T1 state have large absorptivity and long lifetime, the probability for them to be elevated by the incident light to a higher triplet state (T2) is high. The energy consumption accompanied with the T1T2 transition thus leads to the OPL effect. Because of the necessity of intense laser-pulse irradiation to trigger the RSA process, traditional OPL materials have found limited applications4. The scope of practical applications will be significantly broadened if RSA can occur in response to the irradiation by continuous incoherent light with 'normal' intensity. If the lifetime of the triplet excitons is long enough, they can accumulate in the T1 state even when irradiated with weak continuous light. And if the long-lived excitons have large excited-state absorptivity, it will lead to a strong RSA effect. The question then is how to generate triplet excitons with a long lifetime? With this in mind, the research team led by Hirata, Adachi and Vacha manufactured host–guest composite films with small amounts (≤5 wt%) of guest molecules, for example an organometallic complex donor (D) and a fully deuterated pyrene acceptor (A), dispersed in an amorphous hydroxyl steroidal host (Fig. 2). The triplet excitons in the composite films show a lifetime more than 1,000-times longer than that of a conventional organic chromophore7, 8. The large number of hydrogen bonds in the rigid host helps minimize the quenching of the triplet excitons of the guests by restricting their molecular motion at room temperature and preventing them from exposure to detrimental species such as oxygen and moisture7, 8, 9, 10. The formation of the long-lived triplet excitons of A through efficient energy transfer from the T1 state of D allows for effective accumulation of excitons in the T1 state of A on irradiation of the composite films with weak light (Fig. 2). The T1T2 transition of the heavily populated T1 state of A leads to a large increase in light absorption and hence a dramatic decrease in light transmittance as the irradiation power increases. Thanks to efficient RSA, the transmittance of a composite film with an optimal D–A combination gradually decreases from 60% to <10% on irradiation with continuous light with an intensity change from 0.001 to 1 W cm−2; a remarkable OPL effect with low-power irradiation under ambient conditions is thus demonstrated3. The RSA system presented here opens up avenues for the development of heretofore inaccessible OPL materials with great potential for practical applications. Thin films with well-defined power-transmission thresholds, for example, could be used to develop photonic computing systems. Pre-setting of transmittance changes as 0 and 1 states might lead to the construction of photonic calculators with speeds much faster than electronic computers, given the fact that photons travel much faster than electrons. Also, the judicious use of OPL materials can prevent undesired effects of exposure to intense radiation. For example, it is known that jobs requiring the use of tools such as ultraviolet sterilizers, welders and lasers subject the operator to prolonged exposure to intense, harmful light11. The exploration of OPL materials that are able to filter such radiation will undoubtedly contribute to high-tech solutions beneficial for the operator's well-being. Download references

All‐Inorganic Transparent Composite Materials for Optical Limiting

Nonlinear Photonic Glass: All‐Inorganic Transparent Composite Materials for Optical Limiting (Advanced Optical Materials 10/2020)

Strong nonlinear optical limiting of resin composed by carbon nanotubes

Fundamental limits to the refractive index of transparent optical materials

Achieving of high utilization of reduced graphene Oxide-TiO2 nanoparticle composites via oxygen bonds for enhanced optical limiting performance

In situ and tunable structuring of semiconductor-in-glass transparent composite

Advanced composite glasses with metallic, perovskite, and two-dimensional nanocrystals for optoelectronic and photonic applications

Two-Dimensional Metal-Polyphthalocyanine Conjugated Porous Frameworks as Promising Optical Limiting Materials

Nonlinear optics: modulating optical power.

Recent Research Progress on Optical Limiting Property of Materials Based on Phthalocyanine, Its Derivatives, and Carbon Nanotubes

Broadband Ultrafast Nonlinear Optical Limiting at a Porphyrin‐Based 2D Polymer

Tailoring of Nonlinear Optical and Optical Limiting Performance Through Morphology: Pbte Nanostructures in Liquid and Solid-State Matrices

In-Situ Phase Transition Control in the Supercooled State for Robust Active Glass Fiber.

Tailoring of nonlinear optical and optical limiting performance through morphology: PbTe nanostructures in liquid and solid-state matrice

Pressure Engineering Promising Transparent Oxides with Large Conductivity Enhancement and Strong Thermal Stability

Novel Binary Ni-Based Mixed Metal–Organic Framework Nanosheets Materials and Their High Optical Power Limiting

Focal volume optics for composite structuring in transparent solids

Interpenetrated Metal-Porphyrinic Framework for Enhanced Nonlinear Optical Limiting

Nanoscale Engineering of Optical Nonlinearity Based on a Metal Nitride/Oxide Heterostructure.

Broadband Dispersive Free, Large, and Ultrafast Nonlinear Material Platforms for Photonics

Flexible and Transparent Oligothiophene- o -Carborane-Containing Hybrid Films for Nonlinear Optical Limiting Based on Efficient Two-Photon Absorption