Abstract:Ternary strategy has been demonstrated to be an effective way to improve power conversion efficiency (PCE) of single‐junction organic solar cells (OSCs). Herein, high‐efficiency ternary OSCs are fabricated based on the PBDB‐T:DO‐2F binary system and acceptor IDTT‐OB with asymmetric side chains as the third component. The introduction of nonfullerene acceptors (NFAs) IDTT‐OB as a third component can efficiently increase the compatibility of the ternary system, reduce the crystallinity of DO‐2F, optimize the blend film morphology, improve the charge transport and collection, suppress the bimolecular recombination, and reduce the nonradiative energy loss (ΔEnonrad). Finally, the PBDB‐T:DO‐2F:IDTT‐OB‐based ternary device exhibits a high PCE of 14.09% with Voc of 0.87 V, Jsc of 21.47 mA cm−2, and fill factor of 75.70%, which is about 30% higher than the corresponding PBDB‐T:DO‐2F‐ and PBDB‐T:IDTT‐OB‐based binary devices. Meanwhile, the ternary device also achieves a very low ΔEnonrad of 0.22 eV. This work indicates that the ternary strategy can effectively optimize morphology of active layer, reduce nonradiative energy loss, and further improve photovoltaic performance of OSCs. High‐efficiency ternary organic solar cells are fabricated using two nonfullerene acceptors DO‐2F, IDTT‐OB and one polymer donor PBDB‐T. The introduction of IDTT‐OB into PBDB‐T:DO‐2F can effectively optimize blend film morphology, improve charge dissociation and extraction, and suppress bimolecular recombination and nonradiative energy loss. The PBDB‐T:DO‐2F:IDTT‐OB ternary device can achieve significantly enhanced power conversion efficiency of 14.09%.

Ternary Blend Strategy for Achieving High‐Efficiency Organic Solar Cells with Nonfullerene Acceptors Involved

A Comprehensively Theoretical and Experimental Study of Carrier Generation and Transport for Achieving High Performance Ternary Blend Organic Solar Cells

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors.

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Enhancing Intermolecular Packing and Light Harvesting through Asymmetric Non-Fullerene Acceptors for Achieving 18.7% Efficiency Ternary Organic Solar Cells

Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10.

Multicomponent Solar Cells with High Fill Factors and Efficiencies Based on Non-Fullerene Acceptor Isomers

Non-Halogenated Polymer Donor-Based Organic Solar Cells with a Nearly 15% Efficiency Enabled by a Classic Ternary Strategy

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency

Ternary Strategy Enabling High‐Performance Organic Solar Cells with Optimized Film Morphology and Reduced Nonradiative Energy Loss

High-performance organic solar cells based on polymer donor/small molecule donor/nonfullerene acceptor ternary blends

High‐Efficiency Ternary Organic Solar Cells Based on the Synergized Polymeric and Small‐Molecule Donors

Combining Fused‐Ring and Unfused‐Core Electron Acceptors Enables Efficient Ternary Organic Solar Cells with Enhanced Fill Factor and Broad Compositional Tolerance

Boosting Efficiency of Non‐Fullerene Organic Solar Cells Via Introducing Multidimensional Second Acceptors

High Efficiency Ternary Organic Solar Cells Via Morphology Regulation with Asymmetric Nonfused Ring Electron Acceptor

18.7% Efficiency Ternary Organic Solar Cells Using Two Non-Fullerene Acceptors with Excellent Compatibility

Highly Efficient Ternary-Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance.

High-Performance Ternary Organic Solar Cells with Controllable Morphology via Sequential Layer-by-Layer Deposition

Boosting Photovoltaic Performance of Ternary Organic Solar Cells by Integrating a Multi-Functional Guest Acceptor

Achieving 19.78%‐Efficiency Organic Solar Cells by 2D/1A Ternary Blend Strategy with Reduced Non‐Radiative Energy Loss