Abstract:This study presents a novel method for independently calculating organic matter (OM) removal and electricity generation in a microbial fuel cell (MFC) treating sewage. This methodology used OM concentration as the exclusive variable for input, facilitating the prediction of electricity generation with variable Coulombic efficiency. The employed MFC, of tubular design, incorporates an air core surrounded by a carbon-based cathode, an anion exchange membrane , nonwoven graphite fabric, and encircled by twelve carbon brush anodes. This setup successfully reduced chemical oxygen demand (COD) from 180 to 50 mg L −1 and biological oxygen demand (BOD) from 84 to 15 mg L −1 within a 35 h hydraulic retention time (HRT). The resulting effluent BOD satisfies Japanese wastewater treatment standards. In the early HRT phase, the MFC exhibited rapid OM reduction, followed by a stabilization of OM concentration. Despite varying HRTs and the sustained OM levels at prolonged HRTs, the MFC consistently generated 0.29 ± 0.14 A m −2 . This apparent contradiction prompted the consideration of additional OM sources from the anode biomass ( C b ). Calculating electricity production based on OM concentration rather than OM degradation was achieved by assessing anode resistance ( R A n ) across different levels of OM supplementation, employing the Butler–Volmer equation. This approach, incorporating considerations for C b and R A n , accurately reproduced MFC performance. It was observed that OM supplementation from C b constituted 50% at 11 h HRT and escalated to 90% at 27 h HRT. Further analysis, including 16S rRNA gene-based microbial community profiling, indicated that higher cathode resistance ( R Cat ) at 1.0 Ω m 2 , compared to a minimum R A n of 0.10 Ω m 2 , favored methanogenesis over electrogenesis on the carbon brushes. This finding underscores the importance of reducing R Cat and minimizing electrode distance, coupled with enhancing the specific surface area of both electrodes, as crucial factors for the advancement of MFC technology.

Power Generation from a Biocathode Microbial Fuel Cell Biocatalyzed by Ferro/manganese-Oxidizing Bacteria

Sewage Sludge-Derived Carbon-Doped Manganese As Efficient Cathode Catalysts in Microbial Fuel Cells

Effect of cathode electron acceptors on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell

Electricity generation and energy storage in microbial fuel cells with manganese dioxide capacitive electrode

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

Nano-structured Manganese Oxide As a Cathodic Catalyst for Enhanced Oxygen Reduction in a Microbial Fuel Cell Fed with a Synthetic Wastewater.

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Oxygen-Reducing Biocathodes Operating With Passive Oxygen Transfer In Microbial Fuel Cells

Boosting the anode performance of microbial fuel cells with a bacteria-derived biological iron oxide/carbon nanocomposite catalyst

A completely anoxic microbial fuel cell using a photo-biocathode for cathodic carbon dioxide reduction

Evaluation of Applied Cathode Potential to Enhance Biocathode in Microbial Fuel Cells

Photoactive Manganese Ferrite-Modified Bacterial Anode to Simultaneously Boost Both Mediated and Direct Electron Transfer Processes in Microbial Fuel Cells

Bimetallic oxide MnFe2O4 modified carbon felt anode by drip coating: an effective approach enhancing power generation performance of microbial fuel cell

High Performing Gas Diffusion Biocathode for Microbial Fuel Cells Using Acidophilic Iron Oxidizing Bacteria

Enhanced power generation of microbial fuel cell using manganese dioxide-coated anode in flow-through mode

[Mechanisms of Bioelectricity Generation in Enterobacter Aerogenes-Based Microbial Fuel Cells].

The enhancement of microbial fuel cell performance by anodic bacterial community adaptation and cathodic mixed nickel–copper oxides on a graphene electrocatalyst

Anode biomass rather than soluble organic matter is fuel for electricity production in microbial fuel cell at longer hydraulic retention time

Manganese dioxide as an alternative cathodic catalyst to platinum in microbial fuel cells

Electrochemical performance of biocathode microbial fuel cells using petroleum-contaminated soil and hot water spring

Assessing the Performance of Continuous-Flow Microbial Fuel Cells and Membrane Electrode Assembly with Electrodeposited Mn Oxide Catalyst