Abstract:Electrospun nanocomposite polymer blend poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP)/poly(methyl methacrylate) (PMMA) membranes with a novel dispersion of x wt % of one-dimensional (1D) TiO2 nanofiber fillers (x = 0.0-0.8 in steps of 0.2) were developed using the electrospinning technique. The developed nanocomposite polymer membranes were activated using various redox agents such as LiI, NaI, KI, and tetrabutyl ammonium iodide (TBAI). Introduction of the 1D TiO2 nanofiber fillers improves the amorphous nature of the blended polymer membrane, as confirmed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and yielded an electrolyte uptake of over 480% for a 6 wt % TiO2 nanofiber filler-dispersed sample. PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with the LiI-based redox electrolyte provided a high conductivity of 2.80 × 10-2 S cm-1 and a power conversion efficiency (PCE) of 8.08% to their fabricated dye-sensitized solar cells (DSSCs). The observed better ionic conductivity and efficiency of the fabricated DSSCs could be due to the faster movement of the smaller-ionic-radius (Li) ions entrapped inside the amorphous polymer. This enhanced mobility of ions in the quasi-solid electrolyte leads to faster regeneration of the depleting electrons in the photoanode, resulting in improved efficiency. Further, the achieved high conductivity was analyzed in terms of the dynamics and relaxation mechanisms involved by the ionic charge carriers with complex impedance spectroscopy using a random barrier model and Havriliak-Negami formulation. It was observed that the high-conducting PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with LiI-based redox electrolyte show better ac conductivity parameters such as a σ of 5.82 × 10-2 S cm-1, ωe (12685 rad s-1), τe (0.909 × 10-4 s), and n (0.578). Also, dielectric studies revealed that the high-conducting sample has a higher dielectric constant and subsequently high loss. The J-V characteristics were studied using the equivalent circuit of a single-diode model, and the parameters influencing the photovoltaic performance were determined by Symbiotic Organisms Search (SOS) algorithm. The results suggest that the high-efficient sample possesses a minimum series resistance of 1.33 Ω and a maximum shunt resistance of 997 Ω. Hence, the highest-conducting electrospun-blended polymeric nanocomposite (PVDF-HFP-PMMA-6 wt % TiO2 nanofiber fillers) with LiI-based redox agent and tert-butyl pyridine (TBP) additive as the polymer quasi-solid electrolyte nanofibrous membrane can be a better electrolyte for high-performance dye-sensitized solar cell applications.

Ionic Conductivity Enhancement of “soggy Sand” Electrolytes with AlOOH Nanofibers for Dye-Sensitized Solar Cells

Achieving High Initial Coulombic Efficiency and Capacity in a Surface Chemical Grafting Layer of Plateau-type Sodium Titanate

Surface NH 2 -Rich Nanoparticles: Solidifying Ionic-Liquid Electrolytes and Improving the Performance of Dye-Sensitized Solar Cells

Enhanced Performance of Dye Sensitized Solar Cells Through the Incorporation of Al 2 O 3 Nanofillers in Polymer Electrolytes

High-energy aqueous supercapacitors enabled by N/O codoped carbon nanosheets and “water-in-salt” electrolyte

Polyaniline-grafted silica nanocomposites-based gel electrolytes for quasi-solid-state dye-sensitized solar cells

"Soggy Sand" Polymer Composite Nanofiber Membrane Electrolytes for Lithium Ion Batteries

Enhanced ionic mobility and increased efficiency of dye-sensitized solar cell by adding lithium chloride in poly(vinylidene fluoride) nanofiber as electrolyte medium

Gel Electrolytes Containing Several Kinds of Particles Used in Quasi-Solid-State Dye-Sensitized Solar Cells

Novel Dispersion of 1D Nanofiber Fillers for Fast Ion-Conducting Nanocomposite Polymer Blend Quasi-Solid Electrolytes for Dye-Sensitized Solar Cells

Highly Hydroxide-Conductive Nanostructured Solid Electrolyte via Predesigned Ionic Nanoaggregates

High-efficiency dye-sensitized solar cells fabricated with electrospun PVdF-HFP polymer nanofibre-based gel electrolytes

Gelation of organic liquid electrolyte to achieve superior sodium-ion full-cells

Rationalized atomic/clusters dispersion of Fe/Se/Al on interconnected N-doped carbon nanofibers for fast sodiation

A Molecular-Sieving Interphase Towards Low-Concentrated Aqueous Sodium-Ion Batteries

Exploration of amorphous hollow FeOOH@C nanosphere on energy storage for sodium ion batteries

Synthesis of POSS-based ionic conductors with low glass transition temperatures for efficient solid-state dye-sensitized solar cells.

Open-circuit Voltage Enhancement on the Basis of Polymer Gel Electrolyte for a Highly Stable Dye-Sensitized Solar Cell.

Sodium Carboxymethyl Starch-Based Highly Conductive Gel Electrolyte for Quasi-Solid-state Quantum Dot-Sensitized Solar Cells

Li+-Containing, Continuous Silica Nanofibers for High Li+ Conductivity in Composite Polymer Electrolyte

MgF$_2$ as an effective additive for improving ionic conductivity of ceramic solid electrolytes