Abstract:Electrolytes are widely considered as a key component in Li–O2 batteries (LOBs) because they greatly affects the discharge-charge reaction kinetics and reversibility. Herein, we report that 1,3-dimethyl-2-imidazolidinone (DMI) is an excellent electrolyte solvent for LOBs. Comparing with conventional ether and sulfone based electrolytes, it has higher Li2O2 and Li2CO3 solubility, which on the one hand depresses cathode passivation during discharge, and on the other hand promotes the liquid-phase redox shuttling during charge, and consequently lowers the overpotential and improves the cyclability of the battery. However, despite the many advantages at the cathode side, DMI is not stable with bare Li anode. Thus, we have developed a pretreatment method to grow a protective artificial solid-state electrolyte interface (SEI) to prevent the unfavorable side-reactions on Li. The SEI film was formed via the reaction between fluorine-rich organic reagents and Li metal. It is composed of highly Li+-conducting LixBOy, LiF, LixNOy, Li3N particles and some organic compounds, in which LixBOy serves as a binder to enhance its mechanical strength. With the protective SEI, the coulombic efficiency of Li plating/stripping in DMI electrolyte increased from 20% to 98.5% and the fixed capacity cycle life of the assembled LOB was elongated to 205 rounds, which was almost fivefold of the cycle life in dimethyl sulfoxide (DMSO) or tetraglyme (TEGDME) based electrolytes. Our work demonstrates that molecular polarity and ionic solvation structure are the primary issues to be considered when designing high performance Li–O2 battery electrolytes, and cross-linked artificial SEI is effective in improving the anodic stability.

Improving Rate Capability and Reducing Over-Potential of Lithium-Oxygen Batteries Through Optimization of Dimethylsulfoxide-N/N-dimethylacetamide Mixed Electrolyte

Enhanced Cycling Performance of Li–O2 Battery by Using a Li3PO4-Protected Lithium Anode in DMSO-Based Electrolyte

The effect of electrolyte with binary solvents on improving the performance of rechargeable lithium–oxygen batteries

Stable Lithium Oxygen Batteries Enabled by Solvent‐diluent Interaction in N,N‐dimethylacetamide‐based Electrolytes

Lithium Dendrite Suppression and Cycling Efficiency of Lithium Anode

Double-Phase Electrolyte Enabling the Long-Lasting Redox Mediation in Li–O2 Batteries

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

1,3-Dimethyl-2-imidazolidinone: an ideal electrolyte solvent for high-performance Li–O2 battery with pretreated Li anode

Dimethyl Sulfite As an Additive for Lithium Bis(oxalate)borate/γ-Butyrolacton Electrolyte to Improve the Performance of Li-ion Battery

Achieving Low Overpotential Lithium-Oxygen Batteries by Exploiting a New Electrolyte Based on N,N′-Dimethylpropyleneurea

Steric Effect Tuned Ion Solvation Enabling Stable Cycling of High-Voltage Lithium Metal Battery

A LiF protective layer on the Li anode: Towards improving the performance of Li-O2 batteries with a redox mediator.

Exploiting the Steric Effect and Low Dielectric Constant of 1,2-Dimethoxypropane for 4.3 V Lithium Metal Batteries

LiTFSI Concentration Optimization in TEGDME Solvent for Lithium–Oxygen Batteries

Imidazolium bromide: A tri-functional additive for rechargeable Li-O2 batteries

Adoption of Dimethoxyethane and 1,3-Dioxolane in Electrolyte for Fast Charging of Li-Ion Battery

Crown Ether Electrolyte Induced Li2O2 Amorphization for Low Polarization and Long Lifespan Li‐O2 batteries

A novel strategy to improve the electrochemical properties of in-situ polymerized 1,3-dioxolane electrolyte in lithium metal batteries

A rechargeable Li-O2 battery using a lithium nitrate/N,N-dimethylacetamide electrolyte

Low-Polarization Lithium-Oxygen Battery Using [DEME][TFSI] Ionic Liquid Electrolyte