Abstract:The co-reduction of Sm(III) and Zn(II) ions on the Mo electrode and the under potential deposition of Sm(III) ions on the liquid Zn electrode were investigated in LiCl-KCl molten salt at 873K. Cyclic voltammetry, square wave voltammetry and open-circuit chronopotentiometry techniques were employed to study the electrochemical behaviors of Sm(III), Zn(II) and Sm-Zn alloy formation. The results showed that on the inert Mo electrode the electro-reduction of Sm(III) took place in only one soluble-soluble electrochemical step Sm(III)/Sm(II), and the electrochemical step Sm(II)/Sm(0) was not observed within the electrochemical window. In contrast, the deposition potential of Sm(II)/Sm(0) shifted to the positive direction by forming SmxZny intermetallic compounds in both the co-reduction and under potential deposition process. In the co-reduction process, the signals of forming six kinds of SmxZny intermetallic compounds were observed in the high ZnCl2 containing melt, and the formation of SmxZny at about -1.56V is dominant. In the under potential deposition process, the dominant deposition process is also at about -1.6V. The formation of Sm-Zn alloys were carried out by potentiostatic electrolysis on both the Mo electrode and liquid Zn electrode. All the Sm-Zn alloys were characterized by scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and inductively coupled plasma atomic emission spectrometer (ICP-AES). The XRD results showed that the SmxZny compound prepared on the Mo electrode in the high ZnCl2 containing melt was SmZn12, while the SmxZny compound prepared on the liquid Zn electrode was predominantly Sm2Zn17.

Electrochemical Extraction of Cerium from CeO2 Assisted by AlCl3 in Molten LiCl-KCl

Electrochemical Extraction of Cerium by Forming Ce-Zn Alloys in Licl-Kcl Eutectic on W and Liquid Zn Electrodes

Electrochemical study of reduction Ce(III) ions and production of high purity metallic cerium by electrorefining in fused LiCl-KCl eutectic

Electrochemical Behavior and Separation of Ce(III) in LiCl-KCl Molten Salt

Electrochemical Formation of Erbium-Aluminum Alloys from Erbia in the Chloride Melts

A Finite-Element Model for Underpotential Deposition of Ce(III) on an Active Aluminum Electrode in LiCl–KCl Melts

Redox Assisted Solvent Extraction to Enable Highly Efficient Separation of Cerium from Other Lanthanides: Experimental Studies and DFT Calculations

Co-reduction Behaviors of Lanthanum and Aluminium Ions in LiCl-KCl Eutectic

Electrochemical Behaviors of Dy(III) and Its Co-Reduction with Al(III) in Molten LiCl-KCl Salts

Electrochemical Co-Reduction Extraction of Neodymium in LiCl-KCl-ZnCl2 Molten Salt System

Electrochemical Extraction of Samarium from LiCl-KCl Melt by Forming Sm-Zn Alloys

Aluminothermic Reduction of CeO2: Mechanism of an Economical Route to Aluminum-Cerium Alloys

Electrochemical Properties of CeCl3 by Fitting Cyclic Voltammetry Data to a Kinetic Model Accounting for Adsorption and Nucleation

Electrochemical Properties of CeCl 3 by Fitting Cyclic Voltammetry Data to a Kinetic Model Accounting for Adsorption and Nucleation

A Promising Crystalline KCl: Electrolyte Material for Studying the Electrochemical Properties of Cerium on Liquid Indium Electrodes

Electrochemical Removal of Alcl3 from Licl-Kcl Melts

Direct electrochemical preparation of CeCo_5 alloy from mixed oxides

Liquid Al assisted electrochemical extraction of lanthanum by formation of Al11La3 in chloride melts

Electroextraction of Samarium from Sm2O3 in Chloride Melts

Analysis of the micro-alloying effect of cerium additions to the Al-Li alloy 2090

Electrochemical Drawdown of U3+ and Ce3+ in Molten LiCl-KCl Using a Liquid Cadmium Cathode