Abstract:Electrically heated electrodes have been applied for various chemical and biological sensors. However, previous electrically heated electrodes, including microwires and microdiscs are usually small and often suffer from the requirement of frequent calibrations of the electrode surface temperature (Ts) at different environment temperatures. Here, we fabricate a tempera-ture-controllable disk electrode (TCDE) with a conventional size (3~5 mm in diameter). A one-parameter temperature cali-bration is proposed using a temperature transfer coefficient α and a structural model (Ts = Te + α (Th - Te)) to estimate Ts, (Th and Te are the temperature of the heating element and environment, respectively). The value of α is unique for a TCDE and mainly dependent on the structure and materials of the electrodes and the solution in nature. Once α is experimentally de-termined, Ts can be calibrated and found to be applicable to wide fluctuations in room temperature (15.0 ~ 33.0°C) with errors below 1.5% for three types of disk electrodes (gold, glassy carbon and platinum). The required Ts can be obtained by just setting Th without thermal characterization between the heating power and Ts. A simple relationship for exploring the dependence of α on the height (H) and radius (R) of the electrode materials and other constants (a, b, c and R0), α=1-c-a H-b (R-R0)2, is revealed by numerical simulations (COMSOL). The impact of the radii of both the insulating materials of the electrode and the electrochemical cells on Ts is also considered. The effect of the solution thermal conductivity on α is studied. TCDEs are expected to be used as a sensor platform with ehhanced performance.

Supercooled Electrodes

A model for understanding the temperature change of an alternate hot and cold micro-band graphite electrode

Alternate Hot and Cold Electrodes

Direct Electrochemical Generation of Supercooled Sulfur Microdroplets Well below Their Melting Temperature

Surface and sub-surface modifications of copper electrodes exposed to high-field conditioning at cryogenic temperatures

Electrified Operando -Freezing of Electrocatalytic CO 2 Reduction Cells for Cryogenic Electron Microscopy

A Novel Ionic Liquid-Based Electrolyte Assisting the High Performance of Low-Temperature Supercapacitors

Supercooling, Isothermal Soaking and Liquid Phase Separation of Cu–Co Alloys

Electrolyte Formulation with Improved Ion Desolvation and Diffusion Kinetics, and Superior Anti-Corrosion Properties for Ultrawide-Temperature Supercapacitors (–70∼100°C)

Experimental study on the electrically-triggered crystallization behavior of supercooled copper foam-based and expanded graphite-based sodium acetate trihydrate

A Nitrogen-Doped Mesopore-Dominated Carbon Electrode Allied with Anti-Freezing EMIBF4–GBL Electrolyte for Superior Low-Temperature Supercapacitors

Regulating Frozen Electrolyte Structure with Colloidal Dispersion for Low Temperature Aqueous Batteries

Temperature dependent electrochemical reduction of CO 2 at temperature controllable-rotating disk electrode modified with bismuth film

A Micro Electro-Freezing Chip Used in the Crystallization of Aqueous Solutions under Ac Electric Field

High‐Entropy Electrolyte Design for Low‐Temperature Supercapacitors

Freezing dynamics of wetting droplet under a uniform electric field

Electrode Surface Heating with Organic Films Improves CO2 Reduction Kinetics on Copper

Suppression of atom motion and metal deposition in mixed ionic electronic conductors

Electrostatic cooling at electrolyte-electrolyte junctions

Nanoconfined Supercooled Water in Hydrated Two-Dimensional Polyaniline for Sub-Zero Solid-State Zinc-Ion Hybrid Capacitor

Temperature-controllable electrodes with a one-parameter calibration.