Abstract:Carbon capture, as a core technology for mitigating greenhouse gas emissions, the greatest challenge is the balance between separation performance and energy consumption. This study seeks to evaluate and screen the separation performance and energy consumption of four typical adsorbents (13X, Mg-MOF-74, activated carbon, and Lewatit VP OV 1065) in vacuum temperature swing adsorption (VTSA) and vacuum swing adsorption (VSA) through optimization approach, which will support in-depth research and decision-making on adsorption processes. A non-isothermal non-adiabatic numerical model was carried out to describe a novel 4-bed 10-step VTSA cycle developed on an exchange type adsorption unit (ETAU), and the model was validated by binary breakthrough and temperature swing experiments. A 4-bed 10-step VSA cycle was in turn established and investigated. Parametric analysis of the two cycles was performed by varying the operating variables including feed gas flow rate, recycle time, and purge-to-feed ratio. Process optimization of the multiplicative fraction evaluation function, simultaneously considering purity, recovery, and productivity, was achieved using a dual convergence algorithm. Results showed that all four adsorbents could achieve more than 90 % purity and recovery on the VTSA process employing the ETAU for post-combustion carbon capture, and the separation performance was substantially superior to that of the VSA cycle. Mg-MOF-74 obtained a CO 2 product with 97.90 % purity, 98.48 % recovery, and 5.48 mol/kg ads /hr productivity at a desorption temperature of 383.15 K; it has a specific heat consumption of 1.45 GJ th /ton and a specific power consumption of 0.55 GJ el /ton. The total energy consumption of 13X was slightly lower than that of amine adsorbents, giving 95.00 % purity, 97.60 % recovery, and 1.91 mol/kg ads /hr productivity. Relatively low desorption temperature is expected to introduce ultra-low-grade waste heat for partial heat source substitution, contributing to the energy sustainability of adsorption carbon capture technology.

Design of steam-assisted temperature vacuum-swing adsorption processes for efficient CO2 capture from ambient air

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Techno-economic Analysis on Temperature Vacuum Swing Adsorption System Integrated with Pre-Dehumidification for Direct Air Capture

Solar-assisted Temperature Vacuum Swing Adsorption for Direct Air Capture: Effect of Relative Humidity

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Moisture Swing Frequency Response Method for Characterization of Ion-Transport Kinetics of Co2 Adsorption

Comparative Analysis on Temperature Swing Adsorption Cycle for Carbon Capture by Using Internal Heat/mass Recovery

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Analysis on Temperature Vacuum Swing Adsorption Integrated with Heat Pump for Efficient Carbon Capture

Direct air capture with amino acid solvent: Operational optimization using a crossflow air‐liquid contactor

Sorption direct air capture with CO2 utilization

From Lab to Fab: Development and Deployment of Direct Air Capture of CO2

Development of sorbent materials for direct air capture of CO2

Understandings on Design and Application for Direct Air Capture: from Advanced Sorbents to Thermal Cycles

Direct Air Capture Technology and Its Application

Steam-assisted Temperature Swing Adsorption for Carbon Capture Integrated with Heat Pump

Innovative Process Integrating High Temperature Heat Pump and Direct Air Capture

Numerical Study on a Structured Packed Adsorption Bed for Indoor Direct Air Capture

Direct Air Capture (DAC) for Achieving Net-Zero CO2 Emissions: Advances, Applications, and Challenges

Process design and adsorbent screening of VSA and exchanger type VTSA for flue gas CO 2 capture