Abstract:Natural compound eyes inspire the development of artificial optical devices that feature a large field of view and fast motion detection. However, the imaging of artificial compound eyes dramatically depends on many microlenses. The single focal length of the microlens array significantly limits the actual applications of artificial optical devices, like distinguishing objects at different distances. In this study, a curved artificial compound eye for a microlens array with different focal lengths was fabricated by inkjet printing and air-assisted deformation. By adjusting the space of the microlens array, secondary microlenses were created between intervals of the primary microlens. The diameter/height of the primary and secondary microlens arrays are 75/25 µm and 30/9 µm, respectively. The planar-distributed microlens array was transformed into a curved configuration using air-assisted deformation. Compared with adjusting the curved base to distinguish objects at different distances, the reported technique features simplicity and is easy to operate. The applied air pressure can be used to tune the field of view of the artificial compound eye. The microlens arrays with different focal lengths could distinguish the objects at different distances without additional components. When the external objects move a small distance, they can be detected by the microlens arrays due to their different focal lengths. It could effectively improve the motion perception of the optical system. Moreover, the focusing and imaging performances of the fabricated artificial compound eye were further tested. The compound eye combines the advantages of monocular eyes and compound eyes, holding great potential for developing advanced optical devices with a large field of view and automatic variable-focus imaging.

Fabrication and Characterization of Curved Compound Eyes Based on Multifocal Microlenses

Fabrication of a Dual-Focus Artificial Compound Eye with Improved Imaging Based on Modified Microprinting and Air-Assisted Deformation

Direct Fabrication of Compound-Eye Microlens Array on Curved Surfaces by a Facile Femtosecond Laser Enhanced Wet Etching Process

Fabrication of the Curved Artificial Compound Eyes with a Homebuilt Mold

Research of Curved Artificial Compound Eyes Based on MEMS Technology

Microfabrication of bioinspired curved artificial compound eyes: a review

Bio-inspired hemispherical compound eye camera

Fabrication and Characterization of Biologically Inspired Curved-Surface Artificial Compound Eyes

Fabrication of a bionic compound eye on a curved surface by using a self-assembly technique

Multi-curvature compound eye with negative-meniscus substrate for improving imaging defocus and spherical aberration

Fabrication of Bioinspired Omnidirectional and Gapless Microlens Array for Wide Field-of-view Detections

Multi-Focal-Length Curved Microlens Array Based on Electric Inkjet Technology

Design and Fabrication of a Multi-Focusing Artificial Compound Eyes with Negative Meniscus Substrate

Bioinspired Zoom Compound Eyes Enable Variable-Focus Imaging

Micromechanics and Advanced Designs for Curved Photodetector Arrays in Hemispherical Electronic-Eye Cameras

A Simple Route To Fabricate Artificial Compound Eye Structures

Fabrication of multi-focal microlens array on curved surface for wide-angle camera module

A compact bionic compound eye camera for imaging in a large field of view

Fabrication of Artificial Compound Eye with Controllable Field of View and Improved Imaging

A Rapid Precision Fabrication Method for Artificial Compound Eyes

Arthropod Eye-Inspired Digital Camera With Unique Imaging Characteristics