Abstract:Acoustic cavitation serves various therapeutic purposes, with both microbubbles and phase-transit droplets serving as potential cavitation nuclei. This project focused on investigating the intricate interaction between microbubbles and droplets and the resultant impact on acoustic cavitation. To facilitate this investigation, microbubbles with a negative potential of −51.58 mV were prepared, while droplets were endowed with a positive potential of +4.22 mV, facilitating the formation of microbubble-droplet clusters. Microscopic analysis was employed to observe the morphology of these clusters, revealing an initial mean size of 4.85 μm before ultrasound activation and subsequent transformation into larger bubbles with a mean size of 12.54 μm after ultrasound activation. The experimental approach involved the use of varying driven voltages to generate ultrasound waves with different intensities. A passive cavitation detector (PCD) was then employed to capture cavitation signals. Results demonstrated that, when maintaining a microbubble ratio of 50% and varying droplet ratios from 0% to 50%, the driven voltage at which the cavitation peak appeared decreased from 180 mV to 140 mV. Additionally, the mean cavitation intensity exhibited an initial increase from 0.58 to 0.78, followed by a subsequent decrease from 0.78 to 0.63 after normalization. This study provided valuable insights into the dynamic interactions between microbubbles and droplets. Specifically, it showed that microbubble cavitation transferred energy to droplets, leading to the generation of larger bubbles and higher cavitation intensity. Nevertheless, the observed cavitation intensity and threshold were contingent upon the ratios of microbubbles and droplets. Notably, to achieve an ideal cavitation intensity, the energy generated by microbubble cavitation must be substantial enough to activate all droplets, inducing acoustic droplet vaporization (ADV) and cavitation.

Mechanism of Bubble Cavitation Induced by Ultrasonic in Microtubes

Interaction Between Encapsulated Microbubbles: A Finite Element Modelling Study

Removal of Surface-Attached Micro- and Nanobubbles by Ultrasonic Cavitation in Microfluidics

Investigation of the Dynamics of Cavitation Bubbles in a Microfluidic Channel with Actuations

Particle Removal by a Single Cavitation Bubble

Dynamics of Bubble Formation in Highly Viscous Liquid in Co-Flowing Microfluidic Device

Microbubble dynamics in a viscous compressible liquid subject to ultrasound

Bubbling Behaviors Induced by Gas-Liquid Mixture Permeating Through A Porous Medium

Cavitation Bubble Dynamics in a Funnel-Shaped Tube

Stability and cavitation of nanobubble: Insights from large-scale atomistic molecular dynamics simulations

Enhanced microbubble-mediated cavitation by using acoustic droplet vaporization

Study on the Motion Characteristics of Solid Particles in Fine Flow Channels by Ultrasonic Cavitation

Dynamic behaviour of a two-microbubble system under ultrasonic wave excitation

Experimental Investigations on the Cavitation Bubble Dynamics near the Boundary of a Narrow Gap

A Venturi Tube Design for Studying Travelling Bubble Cavitation

Effects of surface tension on the dynamics of a single micro bubble near a rigid wall in an ultrasonic field

Effect of low-frequency ultrasonic field at different power on the dynamics of a single bubble near a rigid wall

Dynamics of Spark Cavitation Bubbles in a Microchamber

Cavitation bubble structures below a soft boundary in an ultrasonic field

Ultrasonic Traveling Waves for Near-Wall Positioning of Single Microbubbles in a Flowing Channel

Controllable Gas-Liquid Phase Flow Patterns And Monodisperse Microbubbles In A Microfluidic T-Junction Device