Abstract:Amphiphilic azo polymers with different azo chromophores and degree of functionalization (DF) were synthesized, and colloidal spheres of the polymers were prepared by gradual hydrophobic aggregation in selective solvents. To obtain suspensions of colloidal spheres, the required amounts of water were added into the THF solutions at a certain stirring rate. As the water content reached ca. 70 vol%, an excess of water was added into the suspensions to "quench" the formed structures. The obtained suspensions of colloidal spheres were sealed after THF was completely volatilized and were characterized by DLS and UV-Vis spectroscopy. The size and size-distribution of colloidal spheres were measured by using a DLS/SLS-5022F laser light scattering apparatus. Before the measurement, the sample was clarified by a 0.45 mu m Millipore filter to remove dust, and all the DLS measurements were carried out with 90 degrees scattering angle. UV-Vis spectroscopy was used to study the azo chromophore structure variation in the colloid formation process by measuring the parameters such as the trans-to-cis photoisomerization rate and the isomerization degree at the photostationary state. In the photoresponse experiments, the sample was irradiated by a 365 nm UV light source, and the light intensity was 7000 mV/cm(2) at a distance of 38 cm and 21000 mV/cm(2) at a distance of 5 cm. respectively. In our experiment. the sample was 15 cm away from the UV light, and the temperature of the environment was 30 degrees C. The influences of molecular structure and preparation conditions on the size and photoresponsive properties of the colloidal spheres were studied in some detail. The result shows that the functional group type and DF as well as the preparation conditions (initial polymer concentration, the rate of water addition, etc.) have significant effects on the size and photoresponsive properties of the colloidal spheres. The size of colloidal spheres increases with the increase of DF and initial concentration, but decreases with the increase of the rate of water addition. The photoinduced isomerization rate of poly {2-[4-(4-ethoxyphenylazo)phenoxy] ethyl acrylate-co-acrylic acid} (PEAPE) colloids is higher than that of poly {2-[4-(4-cyanophenylazo) phenoxyl ethyl acrylate-co-acrylic acid} (PCNPE) colloids. The PEAPE colloids with higher DF show a slower photoisomerization rate. The photoinduced isomerization rate of the colloids decreases with the increase of initial concentration and the decrease of the rate of water addition. The possible mechanism for the influence is also discussed based on thermodynamics and kinetics consideration. It is believed that the colloidal spheres form through a self-assembling process controlled by the dynamic conditions. For high initial concentration and slow water dropping rate, more polymer chains tend to aggregate on the compact cores formed from the most hydrophobic chains as the water content is above the critical water content (CWC). Moreover, the polymeric chains had chance to rearrange themselves to form stable and compact structures due to the slow rate of water addition. On the other hand, as the rate of water addition increased I the polymeric chains attached to the cores were quickly "frozen" before they could completely adjust their conformations. Also, they could form new less compact cores so as to weaken the continuous aggregation probability. As a result, the formed aggregates had loose structures, and the photoinduced isomerization rate was relatively fast.

Preparation of Photosensitive Polymeric Microspheres Via Soap-Free Emulsion Polymerization and Its Photo-Responsivity

Preparation of mono-dispersed fluorescent PMMA/GMA/DVB polymer microspheres with different sizes

Formation Of Photoresponsive Uniform Colloidal Spheres From An Amphiphilic Azobenzene-Containing Random Copolymer

INFLUENCES OF STRUCTURE AND PREPARATION CONDITIONS ON SIZE AND PHOTORESPONSIVE PROPERTIES OF AMPHIPHILIC AZO POLYMER COLLOIDAL SPHERES

Photoresponsive submicron-sized hollow spheres obtained from amphiphilic azobenzene-containing random copolymer

Facile Synthesis of Triple-Stimuli (photo/ph/thermo) Responsive Copolymers of 2-Diazo-1,2-naphthoquinone-mediated Poly(N-Isopropylacrylamide-Co-N-Hydroxymethylacrylamide)

Synthesis and Photoconductivity Study of Azo Functional Polymers

Photoactivation‐Induced Emission Enhancement in Benzosilole‐Based Fluorescent Conjugated Microporous Polymer Microspheres with Converse‐Photobleaching Behavior

Preparation and Characterization of Monodisperse CdS Quantum Dot‐polymer Microspheres

Photo/pH dual-responsive behavior of azopyridine-containing copolymer vesicles

Blue Light Initiated Photopolymerization: Kinetics and Synthesis of Superabsorbent and Robust Poly(N,N′-dimethylacrylamide/Sodium Acrylate) Hydrogels

Microencapsulation of Photochromic Solution with Polyurea by Interfacial Polymerization

Ph-Responsive Hollow Polymeric Microspheres from Irradiated Cyclic Ether Aqueous Solution

Photo-responsive supramolecular self-assembly and disassembly of an azobenzene-containing block copolymer

Synthesis and Characterization of Chiral Fluorescent Polymeric Microspheres

Azo Polymer Microspheres with Photo‐Manipulated Surface and Topographic Structure

Amphiphilic Azo Polymer Spheres, Colloidal Monolayers, and Photoinduced Chromophore Orientation

Preparation of Redox- and Photo-Responsive Ferrocene- and Azobenzene-Based Polymer Films and Their Properties

The synthesis and photocatalytic activity of ZnSe microspheres.

Synthesis of an anthraquinone-containing polymeric photosensitizer and its application in aerobic photooxidation of thioethers

Uv-Responsive Behavior Of Azopyridine-Containing Diblock Copolymeric Vesicles: Photoinduced Fusion, Disintegration And Rearrangement