Abstract:Perovskite solar cells have been widely recognized as the most promising new type of photovoltaic technology due to its rapid development of power conversion efficiency from 3.8% to over 26% in merely fifteen years. However, the high performances were achieved mainly on small area cells with active area lower than 0.1 cm 2 . When enlarging the active area of perovskite solar cells, the efficiency fell dramatically. How to reduce the gap between performances of small area and large area cells gradually becomes a critical point in the path towards the commercialization of perovskite photovoltaic technology. Herein, a strategy to pre-grow a thin layer of TiO 2 on rough FTO substrate by atomic layer deposition method before spin-coating SnO 2 nanoparticles was developed. The FTO substrate could be covered completely by TiO 2 due to the intrinsic conformal film growth mode of atomic layer deposition, thus the direct contact between local protuberance of FTO and perovskite layer could be prevented and the current leakage phenomenon could be prevented. X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and dark current measurement further proved this point. Thanks to the approach, the repeatability and consistency of the small area cell fabrication technology on the same substrate were ameliorated obviously. The improved electron transport process revealed by photoluminescence results and incident light management process revealed by external quantum efficiency results also brought better solar cell performances. More importantly, highly efficient 0.5 cm 2 large area perovskite solar cells were fabricated through optimization of TiO 2 thicknesses. When growing 200 cycles TiO 2 (~9 nm thickness) using atomic layer deposition technology, the champion large area perovskite solar cell possessed a power conversion efficiency as high as 24.8% (certified 24.65%). The device performances also showed excellent repeatability between different fabrication batches. The perovskite solar cell with atomic layer deposited TiO 2 as buffer layer could retain over 95% of its initial efficiency after storage for 1500 hours under nitrogen atmosphere. The technique proposed in this paper could be helpful for the fabrication of perovskite solar cell modules in the realistic photovoltaic market and could be potentially extended to the large area fabrication of other perovskite optoelectronic devices such as light emitting diode, laser and detector.

Application of ZnO Electrode Buffer Layer in Perovskite Solar Cells

Novel Cathode Buffer Layer Enabling over 21.6%/20.9% Efficiency in wide bandgap/inorganic Perovskite Solar Cells

Applications of Zno in Organic and Hybrid Solar Cells

Study on the Performance of Oxygen-Rich Zn(O,S) Buffers Fabricated by Sputtering Deposition and Zn(O,S)/Cu(In,Ga)(S,Se) 2 Interfaces

Low-temperature aqueous solution processed ZnO as an electron transporting layer for efficient perovskite solar cells

The Investigation of the Influence of a Cu2O Buffer Layer on Hole Transport Layers in MAPbI3-Based Perovskite Solar Cells

Copper Oxide Buffer Layers by Pulsed‐Chemical Vapor Deposition for Semitransparent Perovskite Solar Cells

Controlling surface morphology of Ag-doped ZnO as a buffer layer by dispersion engineering in planar perovskite solar cells

Holistic Dielectric and Buffer Interfacial Layers Enable High-Efficiency Perovskite Solar Cells and Modules

Ultrathin chromium oxide buffer layer by reactive thermal deposition for high-performance semitransparent perovskite solar cells

Self-assembled, aligned ZnO nanorod buffer layers for high-current-density, inverted organic photovoltaics

Efficient Planar Perovskite Solar Cells with ZnO Electron Transport Layer

Atomic layer deposition of metal oxide buffer layer enabling the fabrication of high performance large area perovskite solar cells

Low‐Temperature Solution‐Processed ZnO Electron Transport Layer for Highly Efficient and Stable Planar Perovskite Solar Cells with Efficiency over 20%

Low temperature ZnO/TiOx electron-transport layer processed from aqueous solution for highly efficient and stable planar perovskite solar cells

Multifunctional ytterbium oxide buffer for perovskite solar cells

Organic Salt Buffer Layer Enables High‐Performance NiOx‐Based Inverted Perovskite Solar Cells

Research Progress on Inorganic Buffer Layer Materials in Organic-Inorganic Hybrid Solar Cells

Investigations of Carrier Transport Mechanisms in Perovskite Solar Cells with Different Types of ZnO Layer

Aqueous Solution‐processed NiOx Anode Buffer Layers Applicable for Polymer Solar Cells

Interfacial Modification for High-Efficiency Vapor-Phase-Deposited Perovskite Solar Cells Based on a Metal Oxide Buffer Layer.