Abstract:In the classical planar heterojunction perovskite solar cells (PSCs), the electron conducting TiO2 layer shows lower conductivity than the hole transporting materials such as spiro-OMeTAD, which becomes one of the key problems in improving the power conversion efficiency (PCE) of PSCs. In this study, the surface of compact TiO2 layer is modified by a thin self-assembled dodecanedioic acid (DDDA) molecular layer. The TiO2 substrates are immersed into the DDDA solution for 0.5, 2.5, 4.5, 22 h, respectively. It is found that the PCE of PSCs is improved when using the DDDA modified TiO2, showing optimized PCE of 15.35% +/- 0.75% under AM 1.5G illumination at 100 mW.cm(-2) after 4.5 h modification. The short current density (J(SC)) of the best device is improved from 20.34 mA.cm(-2) to 23.28 mA.cm(-2), with the PCE increasing from 14.17% to 15.92%. And it is found that the hysteresis of the PSC is also reduced remarkably with hysteresis index decreasing from 0.4288 to 0.2430. In the meantime, the device with DDDA modification shows a significant improvement in light stability, keeping 71% of its initial PCE value after 720 min exposure under AM 1.5G illumination at 100 mW.cm(-2) without encapsulation. As a contrast, the device without DDDA modification keeps 59% of its initial PCE value under the same condition. To reveal the mechanism, we investigate the surface energy level change using ultraviolet photoemission spectroscopy. It is found that after DDDA modification, the valence-band maximum energy (E-VBM) of TiO2 decreases from -25 eV to -32 eV, and the conduction-band minimum energy (E-CBM) of TiO2 from -05 eV to -12 eV. The shifting of energy level optimizes the energy level alignment at the interface between the TiO2 and perovskite. It promotes the transport of electrons from perovskite layer to compact TiO2 layer and obstructs the transport of holes from perovskite layer to compact TiO2 layer more effectively. In addition, the decrease of E-CBM implies the increase of conductivity of TiO2. We further design a series of electrical experiments, and confirm that the modification improves the conductivity of TiO2 obviously with both contact resistance and thin-film resistance decreasing. In summary, our results indicate the enormous potential of the compact TiO2 layer with a thin self-assembled DDDA molecular layer modification to construct efficient and stable planar heterojunction PSCs for practical applications.

Di-N-Alkylphosphinic Acid with A Long Alkyl Chain As A Coadsorbent for Modifying Tio2 Photoanodes

Di-N-Alkylphosphinic Acids As Coadsorbents for Metal-Free Organic Dye-Sensitized Solar Cells

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Enhance the Performance of Co-Sensitized Solar Cell by a Series Efficient Pyridine-Anchor Co-Adsorbents of N,N′-bis((pyridin-2-yl)methylene)-p-phenylenediimine and a Ruthenium Dye of N719

Enhanced Performance of Ruthenium Dye-Sensitized Solar Cell by Employing an Organic Co-Adsorbent of N , N ’-Bis((pyridin-2-yl)(methyl) Methylene)- O -Phenylenediamine

A novel diphenylphosphinic acid coadsorbent for dye-sensitized solar cell

A New Coadsorbent for Dye-Sensitized Solar Cells

Multiple Adsorption of Tributyl Phosphate Molecule at the Dyed-Tio2/Electrolyte Interface to Suppress the Charge Recombination in Dye-Sensitized Solar Cell

Passivation of Nanocrystalline TiO2 Junctions by Surface Adsorbed Phosphinate Amphiphiles Enhances the Photovoltaic Performance of Dye Sensitized Solar Cells

Effect of Proton Numbers of Phosphate-Based Co-Adsorbents on the Photovoltaic Performance of Dye-Sensitized Solar Cells

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Post-assembly Atomic Layer Deposition of Ultrathin Metal-Oxide Coatings Enhances the Performance of an Organic Dye-Sensitized Solar Cell by Suppressing Dye Aggregation.

Improvement of current characteristic of perovskite solar cells using dodecanedioic acid modified TiO2 electron transporting layer

A Detailed Study on the Working Mechanism of A Heteropoly Acid Modified Tio2 Photoanode for Efficient Dye-Sensitized Solar Cells

Controlling interfacial recombination in aqueous dye-sensitized solar cells by octadecyltrichlorosilane surface treatment.

Effect of Chenodeoxycholic Acid (CDCA) Additive on Phenothiazine Dyes Sensitized Photovoltaic Performance

Recent Progress in Interface Modification for Dye-Sensitized Solar Cells

Coadsorbent Modified TiO2 Electrode and Its Application in Dye-Sensitized Solar Cells

Dual Functional Polymer Interlayer for Facilitating Ion Transport and Reducing Charge Recombination in Dye-Sensitized Solar Cells.

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Amidoamine dendron-based co-adsorbents: Improved performance in dye-sensitized solar cells