Abstract:The laser-driven proton acceleration experiment is carried out on the SGII-U device based on charged particle activation method, and the target parameters are optimized. The charged particle method is used to measure the maximum cutoff energy of proton, angular profile, total yield and conversion efficiency of laser energy to proton energy for different copper film thickness under the same laser condition. It is found that the optimal copper film thickness for the SGII-U picoseond laser-driven proton experiment is 10 mu m, the highest proton energy obtained is about 40 MeV, and the total yield of protons (>4 MeV) is about 4 x 10(12), the conversion efficiency of laser energy to proton energy is about 2%. Thicker or thinner copper film can reduce the maximum cut-off energy of accelerated proton; when the target thickness is reduced to 1 mu m, the pre-pulse of the laser begins to have a significant effect on the target normal sheath acceleration (TNSA) proton, proton energy drops sharply, the proton beam porfile exhibits a hollow structure; when the target thickness is increased to 35 mu m, although the energy of the proton is reduced, the proton beam spot is more uniform. According to our experimental results, when using SGII-U picosecond laser to generate protons as a backlight diagnostics, a thicker Cu film can be selected which can supply more uniform proton beams. When the target is too thin, the TNSA proton itself has a modulation structure which will cause interference to yield the photographic results; when the protons generated by the SGII-U picosecond are used to generate neutron source, the higher proton energy and yield are required, and 10 mu m Cu film is suitable. The further enhancing the TNSA accelerated proton energy and quantity of the SGII-U picosecond laser requires the further improving of the laser contrast.

Picosecond laser-driven proton acceleration study of SGII-U device based on charged particle activation method

Accelerated protons with energies up to 70 MeV based on the optimized SG-II Peta-watt laser facility

High-quality GeV Proton Beam Generation from Multiple-Laser Interaction with Double-Layer Target

Optimization of Proton Beam Quality by Obliquely Incident Laser Pre-Pulse

High-Energy Monoenergetic Protons from Multistaged Acceleration of Thin Double-Layer Target by Circularly Polarized Laser

Focal Spot Effects on the Generation of Proton Beams During Target Normal Sheath Acceleration

Cascaded proton acceleration by collisionless electrostatic shock

Proton acceleration from vacuum-gapped double-foil target with low-contrast picosecond intense laser

Enhanced Laser Proton Acceleration by Target Ablation on a Femtosecond Laser System

Effects of Micro-Structures on Laser-Proton Acceleration

Enhanced Proton Acceleration Using Split Intense Femtosecond Laser Pulses

Enhanced proton acceleration from an ultrathin target irradiated by laser pulses with plateau ASE

Generating Proton Beams Exceeding 10 MeV Using High Contrast 60TW Laser

Experimental Research of Fast Proton Generation from Ultra-short Intense Laser Pulses Interaction with Different Thickness Al Foils

Optimal collimation of proton beams accelerated by a Laguerre–Gaussian laser with a proper pulse duration

Ion acceleration with few cycle relativistic laser pulses from foil targets

Ultrahigh Energy Proton Generation in Sequential Radiation Pressure and Bubble Regime

Collimated protons accelerated from an overdense gas jet irradiated by a 1 micron wavelength high-intensity short-pulse laser

Cascaded acceleration of proton beams in ultrashort laser-irradiated microtubes

Laser-driven Collimated Tens-Gev Monoenergetic Protons from Mass-Limited Target Plus Preformed Channel

High-energy proton beam acceleration driven by an intense ultrarelativistic electron beam in plasma