Abstract:We report the effect of radio frequency (RF) acetylene plasma on the dynamics and composition of titanium (Ti) plasma plume in a plasma-enhanced pulsed laser deposition (PEPLD) system. The titanium target, mounted inside a capacitively coupled RF discharge, was ablated by using a nanosecond Nd:YAG pulsed laser at 1064 nm with a power density of 2.65 GW/cm 2 . The experiments were performed at different operating pressures of acetylene. Fast imaging and optical emission spectroscopy were employed to study the physics behind the pulsed laser deposition in both (PLD) and PEPLD systems. A nonlinear dependence of the plasma plume evolution was observed over a range of pressure. Different expansion regimes correspond to the pressure of the experiments. The plume expansion velocity ranges between 6 × 10 3 m/s and 30 × 10 3 m/s. Emission spectra reveal the presence of C II and Ti II lines depending on the experimental conditions. The presence of background RF plasma leads to substantial enhancement of the emission intensity of the C II spectral lines. In addition, with increasing RF power and background pressure, the intensities of the C II spectral lines increase; whereas the intensities of the Ti II spectral lines decrease with the increase in RF power. Plasma temperature was estimated from the Ti II lines using the Boltzmann plot method, whereas the electron density was estimated from the Stark-broadened Ti II line at 454.9 nm. The calculated densities and temperatures lie between 10 17 –10 18 cm −3 and 0.8–2.0 eV, respectively. These results show the effects of the different backgrounds (either neutral or RF plasma) on the propagation of the laser-produced plasma (LPP), which we propose to be useful in the thin film deposition process using PLD.

Study on the Evolvement of Plasma Generated by Pulsed Laser Deposition of Thin Film

Study on the optical thin film deposited by plasma ion plating

Comprehensive Study of the Film Surface Temperature and Plasma Thermokinetics During La1.85Sr0.15CuO4 Deposition by Laser Ablation

Spatial spectroscopic diagnose of the plasma produced from laser ablation of a KTA crystal

Study on the behavior of the Plasma Plume and Film Quality using Pulsed Laser Deposition with Tungsten Target

Development and Optimization of Step-A Linear Plasma Device for Plasma-Material Interaction Studies

Effect of RF acetylene plasma on the composition and dynamics of a titanium plasma plume in a plasma enhanced pulsed laser deposition system

Interactions Between Pulsed Laser-Induced Plasma and Ecr Microwave Plasma

Comprehensive researches on dynamics of nanosecond laser produced plasmas

Laser-generated plasmas in length scales relevant for thin film growth and processing: simulation and experiment

Numerical Simulation on Evolution of Ablation Plasma Generated by Strong Laser

Experimental Study on the Temporal Evolution Parameters of Laser–Produced Tin Plasma under Different Laser Pulse Energies for LPP–EUV Source

Numerical Research on Plasma Generation and Expansion into Vacuum

The Interaction of Ambient Background Gas with a Plume Formed in Pulsed Laser Deposition

Simulation of Laser-Heating and Energetic Plasma Plume Expansion in Pulsed Laser Deposition of Y3Fe5O12

UV radiation enhanced oxygen vacancy formation caused by the PLD plasma plume

Thermal regime and effect studying on the ablation process of thin films prepared by nanosecond pulsed laser

Temporal Evolutions of the Plasma Density and Temperature of Laser-Produced Plasma Expansion in an External Transverse Magnetic Field

Numerical Simulation of Transient Multiphase Field During Hybrid Plasma-Laser Deposition Manufacturing

A Study of Dynamics and Chemical Reactions in Laser-Ablated PbTiO3 Plume by Optical-Wavelength-sensitive CCD Photography

Vaporization effect studying on high-power nanosecond pulsed laser deposition